D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... Bedienungsanleitung

D-Link DGE-560T Quick Installation Guide2

Product Contents

Verify that your DGE-560T adapter package contains the following items.

If any items are missing, please contact your reseller.

• D-Link DGE-560T Gigabit PCI Express Ethernet Adapter

• Drivers, Manual, and Warranty on CD

System Requirements

Before installing the DGE-560T, check your system for the following

minimum system requirements.

• One of the following operating systems:

• Windows®2000 (service pack 4) • Windows®2003

• Windows®XP (service pack 2) • Windows Vista™

• Linux (2.4.13 or higher) • Netware 5.10

• FreeBSD 5.x (Intel x36) • Netware 6.x

• Pentium 150MHz or Faster

• 64MB RAM

• 32MB Free Hard Drive Space

• One Available PCI Express Slot (x1, x4, x8, or x16)

• CD-ROM Drive

D-Link DGE-560T Quick Installation Guide 3

Introduction

Thank you for choosing the D-Link DGE-560T Gigabit PCI Express

Ethernet Adapter, the value leader among Fast Ethernet/Gigabit Ethernet

adapters.

With the D-Link DGE-560T, your PC can be connected to an Ethernet,

Fast Ethernet, or Gigabit Ethernet network. The PC must be equipped

with a PCI Express x1 expansion slot; alternatively the D-Link DGE-560T

can be installed in a PCI Express x4, x8 or x16 expansion slot.

The D-Link DGE-560T automatically detects the parameters of its

Ethernet environment, and automatically negotiates and determines its

own speed and duplex settings as required for maximum performance

within the environment. (The auto-negotiation function is effective only

when the D-Link DGE-560T is connected to the network by a device

(switch or hub) that also has auto-negotiation functionality.)

Inside its compact form, the D-Link DGE-560T holds an Ethernet controller,

network processing interface, and a direct port for connecting an RJ-45

network cable.The D-Link DGE-560T requires no pre-installation setup—

simply insert it into the PCI Express slot (for detailed information, please

refer to the Installation Guide).

The D-Link DGE-560T is supplied with an RJ-45 receptacle, which

receives the network cable. The direct port features full LED display for

linkage and activity states, speed, and transmitting and receiving data.

D-Link DGE-560T Quick Installation Guide4

Connections and LEDs

Ethernet Port

Activity/Link (ACT/Link)

This indicator lights green when the RJ-45 port is

connected to an Ethernet network. If the indicator

is blinking green, it is transmitting/receiving data to/

from the Ethernet network.

Speed Indicator

The indicator lights yellow when the port is connected

to a 1000Mbps Gigabit Ethernet Network and the

indicator lights green when the port is connected to

a 100Mbps Fast Ethernet Network. Otherwise, this

indicator remains off when the port is connected to a

10Mbps Ethernet Network.

D-Link DGE-560T Quick Installation Guide 5

Driver Installation

Note: Do not install the adapter until you install the drivers.

With your computer on, insert the D-Link CD into your CD-ROM Drive.

When the autorun screen appears, click Install Drivers.

If the Autorun CD function does not automatically start on your computer,

go to Start > Run. In the run command box type “D:\Autorun.exe” (where

D: represents the drive letter of your CD-ROM drive).

After a few moments, the Finish screen will appear. Click OK. Select No

if you are prompted to restart your computer. Shut down your computer.

Drivers for non-Windows®operating systems are located on the D-Link

CD, and can be accessed via the View Other Drivers button.

Please see the section “Alternate Driver Installation” in the manual for a

detailed description on installing drivers for a speciﬁc operating system.

D-Link DGE-560T Quick Installation Guide6

Hardware Installation

1. Shut down the computer and unplug the power cord.

2. Remove the chassis cover. If you are installing a network adapter in

a tower computer, we recommend to put the computer on its side in

order to be able to apply the correct force to insert the adapter into

the PCI Express slot.

3. Locate an empty PCI Express slot on the motherboard.

4. Insert the network adapter into the PCI Express slot and push it down

vertically into the slot until it is ﬁrmly seated.

5. Install the bracket screw to secure the network adapter to the

computer chassis.

D-Link DGE-560T Quick Installation Guide 7

Additional Information

If you are encountering problems setting up your network adapter, please

refer to the manual located on the Autorun CD.

6. Replace the computer chassis cover. Reconnect the power and switch

the computer power on. If the BIOS section of your computer’s boot

program is plug-and-play compliant, then at power-up the BIOS will

automatically conﬁgure any newly installed adapter. Refer to page 16

in the manual for instructions to verify your installation.

D-Link DGE-560T Quick Installation Guide8

Technical Support

D-Link’s website contains the latest user documentation and

software updates for D-Link products.

U.S. and Canadian customers can contact D-Link Technical

Support through our website or by phone.

United States

Telephone

(877) 453-5465

World Wide Web

http://support.dlink.com

Canada

Telephone

(800) 361-5265

World Wide Web

http://support.dlink.com

Version 1.1

September 24, 2007

of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective

owners. Product speciﬁcations, size and shape are subject to change without notice, and actual product appearance may differ from that

depicted on the packaging. Visit www.dlink.com for more details.

Andere Handbücher für DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network...

Inhaltsverzeichnis

Andere D-Link Computerhardware Handbücher

D-Link

D-Link DWM-162R Bedienungsanleitung

D-Link

D-Link DUB-1320 Bedienungsanleitung

D-Link

D-Link DFE-690TXD Bedienungsanleitung

D-Link

D-Link WB1500 Bedienungsanleitung

D-Link

D-Link DFE-680TX Bedienungsanleitung

D-Link

D-Link DUB-1320 Bedienungsanleitung

D-Link

D-Link DW-650 Bedienungsanleitung

D-Link

D-Link DW-655 Bedienungsanleitung

D-Link

D-Link DM-336 Bedienungsanleitung

D-Link

D-Link DMF-560TX Bedienungsanleitung

D-Link

D-Link WCB-B11 Bedienungsanleitung

D-Link

D-Link DWA-582 Bedienungsanleitung

D-Link

D-Link DirectPort DMF-560TXD Bedienungsanleitung

D-Link

D-Link DWA-548 Bedienungsanleitung

D-Link

D-Link PCMCIA WIRELESS ASAPTER DWL-650 Bedienungsanleitung

D-Link

D-Link AirPlus G DWL-G510 Bedienungsanleitung

D-Link

D-Link DW-120XX Bedienungsanleitung

D-Link

D-Link DE-660CT Bedienungsanleitung

D-Link

D-Link Express EtherNetwork DFE-670TXD Bedienungsanleitung

D-Link

D-Link DXE-820S Bedienungsanleitung

D-Link

D-Link DUB-1310 Bedienungsanleitung

D-Link

D-Link DWM-652 Bedienungsanleitung

D-Link

D-Link DUB-1320 Bedienungsanleitung

D-Link

D-Link Express EtherNetwork DFE-670TXD Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung