D-Link DVG-1120S - VoIP Gateway/Router With 1 LAN... Bedienungsanleitung

VoIP Residential Gateway

with Two Voice Ports

Manual

Building Networks for People

D-Link

DVG-1120S

Contents

PackageContents ................................................................................3

Introduction............................................................................................4

Connections..........................................................................................5

Features andBenefits ...........................................................................6

LEDs ....................................................................................................7

Web-basedManagement......................................................................8

ConfigurationUsing aConsole............................................................35

Usingthe ConsolePort .......................................................................40

CommandLineInterface .....................................................................46

NetworkingBasics ..............................................................................54

TechnicalSpecifications ......................................................................69

ContactingTechnicalSupport ..............................................................72

Warranty..............................................................................................73

Registration ........................................................................................76

Contents of Package:

D-Link DVG-1120S

VoIP Residential Gateway with Two Voice Ports

A/C PowerAdapter

ManualonCD

QuickInstallationGuide

If any of the above items are missing, please contact your reseller.

System Requirements For Configuration:

Package Contents

At least 128 MB of memory and a 500 MHz processor



Computer with Windows, Macintosh, or Linux-based operating

system with an installed Ethernet adapter

Internet Explorer or Netscape Navigator version 4.0 or above,

with JavaScript enabled



Note:Usingapowersupplywithadifferentvoltageratingthantheoneincludedwith

theDVG-1120S will cause damage and void the warranty for this product.

Introduction

TheD-LinkDVG-1120SVoIPStationGatewaylinkstraditionaltelephonenetworks

to IP networks with conventional telephone devices such as analog phones or

fax machines.

The DVG-1120S includes two Foreign Exchange Subscriber (FXS) interfaces

with normal RJ-11 telephone connectors that provide voice/fax communication

over the IP network.

Two Ethernet ports are also provided. One Ethernet port is for a DSL/Cable

Modem or other WAN device, and the other is for connection to create a home

or small office LAN network.

The built-in DHCP server and Network Address Translation (NAT) function

automatically assigns IP addresses for LAN users, allowing multiple users to

share a single Internet connection. You can configure and monitor the DVG-

1120S via the Console or the Web browser. Telnet and SNMP management is

also supported.

Byroutingcalls over the Internetorany IPnetwork, the DVG-1120S can reduce

or eliminate long distance or inter-office phone charges. Corporations can also

enjoy the benefits of network consolidation and reduction of leased lines by

relying on the Internet service providers to deliver toll-quality voice

communications over the IP networks.

RESET

CONSOLE ETHERNET

VoIP WA N LINE1

PSTN

12V 1A 2

Connections - Back Panel of Unit

AC Power Connector Use the

includedpoweradapter.Ifyouuse

a power adapter other than the

oneincluded with the productyou

will damage the device and void

the warranty on this product.

PSTN/VoIP

Switch to

select PSTN

or VoIP mode

When the

switch is in

the down

position,

Phone1/2 will

bein VoIP

Mode.

When the

switch is in

the up

position,

Phone1/2 will

be configured

to PSTN

Mode.

Reset Switch Used to return the device

to its original configuration. This is the

same as performing a factory reset.

Diagnostic Port An RJ-14

port used to configure the

device. (User needs a RJ-

14 to RS-232 converter).

Plug one end of a straight-

through wired RJ-14 cable

to the device and the other

end to a serial port of a PC

running a terminal

emulation program (such

as Microsoft HyperTerminal)

or a VT-100 terminal.

Phone 1 to 2

Normal RJ-11 phone

jacks used to

connect telephones

and fax machines.

Plug your normal

telephone(s) and/or

fax machine directly

into any of these

jacks.

Line RJ 11 phone

jack for connecting

to a standard

telephonewalloutlet

throughan

approved (No. 26

AWG or larger)

telecommunications

line cord.

Ethernet

WAN A

10Mbps

Ethernet port

fitted with an

RJ-45

connector

used to

connect the

VoIPgateway

to a WAN

device(e.g.

Cable/ADSL

Modem). This

port accepts

Category 3, 4

or 5 UTP

cabling with

an RJ-45

connector.

Ethernet LAN

A10/100Mbps

dual-speed

Fast Ethernet

port fitted with

an RJ-45

connector

used to

connect the

VoIPgateway

toaLAN

device(hub,

switch, PC,

etc.). This port

accepts

Category 5 or

betterUTP

cabling with

an RJ-45

connector.

Warning! Using a different power adapter than the

oneincludedwithyour purchase will damagethe

DVG-1120Sand voidthewarranty.

Two analogFXS interface portsaccepting RJ-11connectors to facilitate

two VoIP connections

One analog POTS interface for PSTN Life Line (standard phone line)

One 10Mbps WAN port for connecting to a DSL/Cable Modem or other

WAN devices

One 10/100Mbps LAN port for connecting to a local network

IP address assignment using DHCP (Dynamic Host Configuration

Protocol) or static configuration

IP Routing support (RIP1, RIP2 and Static Routing)

Remote software download/update

Supports IP sharing to allow multiple users to access the Internet via a

single IP address

Built-in PPPoE function to support dial-up connection for broadband

technology

Supports Caller ID

Supports QoS to guarantee voice quality

Automatic Call Redirection (ACR) function support

PSTN or VoIP line automatic selection (e.g. 110, 119)

PSTN/ VoIP routing table support

Call will automatically redirect to PSTN in case of getting the

“4xx, 5xx and 6xx” error message from SIP server.

Life Line support

Automatic fall back to PSTN mode in case of power failure

PSTN/VoIPline selection manually (VoIP/PSTN Callalternation

via configurable prefix number)

Listening of incoming call from PSTN



Features & Benefits



DVG-112 0M

WAN

VoIP

Gateway

Status

Power

Phone1 Phone2Ethernet

Alarm

LEDS - Front Panel of Unit

Ethernet This LED displays the

connection speed, link status, and

activity on the 10/100 dual-speed

Ethernet port that is used to connect

toyour LAN.

10/100M - This indicator remains

unlit when there is no connection,

or the port is operating at 10Mbps

throughaconnectionto a10BASE-

T device. It is lit when the port is

operating at 100Mbps through a

connection to a dual-speed or

100BASE-TX Fast Ethernet

device.

Link/Act - When a good link to a

powered-up but idle device is

detected on a port, this indicator

shines steadily. When packets are

received from the device, the

indicator blinks off and on.

WAN This LED displays the

link status and activity on the

10MEthernetport thatisused

to connect to your WAN

device (usually a Cable or

ADSLModem). When agood

link to a powered-up but idle

device is detected on a port,

the WAN indicator shines

steadily. When packets are

received from the device, the

indicator blinks off and on.

Phone 1 to 2 This LED displays

the PSTN status and Hook/

Ringingactivity on theRJ-11 port

that is used to connect to your

normaltelephone(s)/fax machine

and PSTN line.

Power This LED is lit when

the device is receiving

power; otherwise, it is unlit.

Status/Alarm This LED will remain

dark when the CPE is either

performing a self-test/booting up or

not registered to the SIP server. The

LED will remain green when the

system is already registered to the

SIP server. It will flash slowly during

registration, until all ports have been

registered.

PSTN/VoIP - Lights when

PSTN line is in use. It is dark

during VoIP communication.

Hook/Ringing - When an off-

hook action is detected on a

phoneport,thisindicatorshines

steadily. When a ringing signal

isreceived fromthedevice, the

indicator blinks off and on.

DVG-1120S

Web-based Management

In order to use a web browser to configure the VoIP gateway, you must make

sure it has a valid Ethernet connection to a PC or LAN via its LAN port.

Accessthe configurationutility tocheckthe LANport by enteringtheIPAddress

into your web browser address field.

Initially,the VoIP

gateway does not have

a Username or

Password. To log in,

simply click on the OK

button.

Afterloggingin,the

Device Info screen on

the following page will

be displayed.

Click on Login to the

Web-based

Management

module.

192.168.15.1

Type 192.168.15.1

(the IPAddress) into

the address field of

your browser. http://192.168.15.1

Web-based Management (continued)

Setting Up the Connection

TheVoIPgateway’sWANportcomes

with DHCP as the default IP setting.

If the VoIP gateway cannot get the

assigned DHCP IP, it will use the

manualIP (defaultis10.1.1.1 )asit’s

defaultIP.

To configuretheWAN port,pleasedo the following:

Then go to Start>Control

Panel>Network

Connections>Right-click local

area connection >select

Properties> double click Internet

Protocol (TCP/IP). The screen at

right will appear.

Make sure the PC is in the same IP

domain as the VoIP gateway. You

can do this by changing the IP

Address of the PC as shown here.

Click on Config WAN IPAddress.

Manually input the

WAN IPAddress here.

Web-based Management (continued)

Config IP - Config WAN IP Address

IPAddress - Enter a WAN port IPAddress for the VoIP gateway.

Subnet Mask -Enter a WAN port subnet mask for the VoIP gateway.

Default Gateway - Enter the IPAddress of the WAN devices you are

using to make the WAN connection.

Host Name - This is a user-defined host name for this VoIP Gateway.

DNS1 Server IP - Enter the IP Address of the first DNS Server.

DNS2 Server IP - Enter the IP Address of the second DNS Server.

User Name - Enter the User Name for the PPPoE function.

Authentication Password - Enter the Password for the PPPoE function.

Confirm Password - Enter the Password again for confirmation.

More WAN IP

Configuration

settings include:

Manual -When

Manual is

chosen, the

VoIP gateway will obtain its IP settings from the fields located just

below.

BOOTP -When BOOTP is chosen, the VoIP will attempt to obtain

its IP settings from a BOOTP server located on your WAN.

DHCP -When DHCP is chosen, the VoIP will attempt to obtain its IP

settings from a DCHP server located on your WAN.

PPPoE -When PPPoE is chosen, the VoIP will attempt to obtain its

IP settings through PPPoE on your WAN.

Get IP From -

Choose the method

that theVoIPgateway

will use to obtain its

IP settings once it is

restarted. Choices

include:

Inhaltsverzeichnis

Andere D-Link Tor Handbücher

D-Link

D-Link DVG-3104MS - VoiceCenter PSTN Gateway Bedienungsanleitung

D-Link

D-Link DVG-5004S Bedienungsanleitung

D-Link

D-Link DVG-3032S Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DVG-4088S Bedienungsanleitung

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DVG-6004S Bedienungsanleitung

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DBG-2000 Bedienungsanleitung

D-Link

D-Link DG-104S Bedienungsanleitung

D-Link

D-Link DVG-2032S Bedienungsanleitung

D-Link

D-Link DG-102S Bedienungsanleitung

D-Link

D-Link DI-701 iShare Bedienungsanleitung

D-Link

D-Link DSA 5100 - Airspot - Gateway Bedienungsanleitung

D-Link

D-Link DSA-3600 Bedienungsanleitung

D-Link

D-Link DVA-G3810BN Bedienungsanleitung

D-Link

D-Link DSA-3110 Bedienungsanleitung

D-Link

D-Link DPN-1021G Bedienungsanleitung

D-Link

D-Link DIV-140 Bedienungsanleitung

D-Link

D-Link DPN-124G Bedienungsanleitung

D-Link

D-Link DVG-2016 Bedienungsanleitung

D-Link

D-Link Airspot DSA-3100 Bedienungsanleitung

D-Link

D-Link DG-102SP Bedienungsanleitung

D-Link

D-Link DCH-G020 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung