D-Link DAP-1650 Bedienungsanleitung
DAP-1650
Quick Install Guide
Wireless AC1200
Dual Band Gigabit Range Extender
2DAP-1650 Install Guide
Computer with:
• Windows® 8, 7, Vista®, XP (SP3), Mac OS® X (10.5 or higher)
• Internet Explorer 7, Chrome, Firefox, or Safari 5 or higher
Mobile Apps:
• SharePort Mobile App requires iOS 4.3 or Android 2.0
• QRS Mobile App requires iOS 4.3 or Android 2.0
For Internet Access:
• Cable or DSL Modem and Router
• Subscription with an Internet Service Provider (ISP)
Minimum Requirements
Package Contents
Note: Using a power supply with a dierent voltage than the one included with the
DAP-1650 will cause damage and void the warranty for this product. If any of the above
items are missing, please contact your reseller.
DAP-1650 Wireless Range Extender
Power Adapter
Ethernet Cable
Wi-Fi Conguration Card
Quick Install Guide
If any of the above items are missing, please contact your reseller.
DAP-1650 Install Guide 3
Product Overview
LED Color Status Description
Power LED
Orange Solid The DAP-1650 is powering on or booting up.
Blinking The device is in recovery mode.
Green
Solid The device is on and functioning properly.
Blinking The WPS button has been pushed and the device
is processing a connection.
Internet LED
Green Solid A successful connection has been established.*
Orange Blinking A rmware upgrade is in progress.
O The device is being reset to the factory default
settings.
Internet LED
Power LED
*Note: When the LED turns solid green, this indicates that the DAP-1650 is securely
connected to your wireless router or access point.
4DAP-1650 Install Guide
Connections
1 USB Port Connect a USB thumb drive to share les. (Only in AP mode.)
2 WPS Button Press to initiate the WPS (Wi-Fi Protected Setup) process.
3Ethernet
Ports (1-4)
Connect Ethernet devices like computers, gaming consoles,
printers, and NAS (Network Storage) devices to your wireless
network.
4Power
Button Press to power the device on and o.
5 Power Port Connect the supplied power adapter to an outlet.
1
3
4
5
2
DAP-1650 Install Guide 5
Connect to Your Router
Using WPS
1Find an available outlet near your wireless
router. Plug in the DAP-1650 and wait until the
Power LED is solid green.
2Press the WPS (Wi-Fi Protected Setup) button
on your wireless router.
Within one minute, press the WPS button on
the DAP-1650. The Power LED will start to blink.
3
4You can now unplug and move the DAP-1650 to a location between your
wireless router and the area that you need wireless coverage.
12V
2A
USB
WPS
1
2
3
LAN
4
POWER
12V
2A
USB
WPS
1
2
3
LAN
4
POWER
6DAP-1650 Install Guide
Connect Your
Wireless Devices
5From your wireless device go to the Wireless Utility to display the available
wireless networks and select the Wi-Fi Name (SSID) that appears on the Wi-Fi
Conguration Card.
6Your device is now connected to the DAP-1650 and can connect to your
wireless router. If you want to change your network settings, password, etc.,
follow the steps on the next page to congure the DAP-1650. To connect
additional devices, repeat step 5.
Your setup is complete!
When using WPS to connect to the router, the SSID on the DAP-1650 will
automatically be assigned the following:
• 2.4GHz (Your Router’s SSID) - EXT
• 5GHz (Your Router’s SSID) - EXT5G
The Wi-Fi password for your router will be the same for the DAP-1650.
Repeat step 5 to connect additional Wi-Fi devices to the DAP-1650.
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To congure your extender, go to:
http://dlinkap.local.
Or http://192.168.0.50
Username: “Admin”
Password:”“ (leave the eld blank)
DAP-1650 Install Guide 7
Congure the DAP-1650
Using a Web Browser
Use the web-based conguration utility on the DAP-1650 to do the following:
• Run the Setup Wizard
• Change wireless and network settings
Open the wireless utility on your wireless device or computer. Select the Wi-Fi
Name (from the Wi-Fi Conguration Card) and enter the password.
2
1Plug the DAP-1650 in an available outlet near your
router. You may move it to a more suitable location
after conguration.
Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome) and enter
http://dlinkap.local./. You may also enter the IP address* of the DAP-1650.
Windows XP users can enter http://dlinkap.
3
* The default IP address is 192.168.0.50. Once the DAP-1650 connects to your router, it
will get assigned a new IP address based on your router/network’s DHCP settings. You
will need to log in to your router and view the DHCP table to see what IP address was
assigned to the DAP-1650. The MAC address is printed on the label on the DAP-1650.
12V
2A
USB
WPS
1
2
3
LAN
4
POWER
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To congure your extender, go to:
http://dlinkap.local.
Or http://192.168.0.50
Username: “Admin”
Password:”“ (leave the eld blank)
8DAP-1650 Install Guide
The rst time you connect, the DAP-1650 will automatically launch the Wi-Fi
Connection Setup Wizard. Click Next.
Note: The next time you go to the conguration utility, you will see the login
screen. By default the password is blank. Click Log in.
4
5By default, your DAP-1650 will be set to Extender mode. Click Next.
DAP-1650 Install Guide 9
6This screen will allow you to set a Wi-Fi Network Name (SSID) and
Wi-Fi Password for both the 2.4GHz and 5GHz bands. Click Next.
7You will see this screen while the DAP-1650 is scanning for an available
Wi-Fi network. Click Finish.
8You will see a list of available Wi-Fi networks. Select the Wi-Fi Name of
the wireless network you wish to connect to. Click Connect.
10 DAP-1650 Install Guide
9If the existing wireless network is password protected, you must enter
the Wi-Fi Password. Click Next.
10
11
Set a password for administrator access to the Web-based conguration.
Click Next.
A summary page will be displayed showing the Wi-Fi Settings. Click Finish.
The DAP-1650 will reboot.
Andere Handbücher für DAP-1650
3
Inhaltsverzeichnis
Andere D-Link Schalten Handbücher
D-Link
D-Link 55443 Bedienungsanleitung
D-Link
D-Link xStack DGS-3400 Series Bedienungsanleitung
D-Link
D-Link DGS-1016A Bedienungsanleitung
D-Link
D-Link DGS-1005D - Switch Bedienungsanleitung
D-Link
D-Link DGS-1250 Series Bedienungsanleitung
D-Link
D-Link DFE-908x Bedienungsanleitung
D-Link
D-Link xStack DGS-3420 Series Bedienungsanleitung
D-Link
D-Link DUB-H4 - Hub - USB Bedienungsanleitung
D-Link
D-Link DES-3852 - xStack Switch - Stackable Bedienungsanleitung
D-Link
D-Link DGS-3130 Series Handbuch
D-Link
D-Link DWS-1008 Bedienungsanleitung
D-Link
D-Link DGS-1100-16/ME Bedienungsanleitung
D-Link
D-Link DUB-H4 - Hub - USB Bedienungsanleitung
D-Link
D-Link DGS-1005G Bedienungsanleitung
D-Link
D-Link DGS-3000-28L Bedienungsanleitung
D-Link
D-Link des-1010g Bedienungsanleitung
D-Link
D-Link Dis-200G Series Bedienungsanleitung
D-Link
D-Link xStack DES-6500 Bedienungsanleitung
D-Link
D-Link DIS-100G-5SW Bedienungsanleitung
D-Link
D-Link DGS-3000-28X/B1A Bedienungsanleitung
Beliebte Schalten Handbücher anderer Marken
Ruijie
Ruijie RG-PF2920 Series Installations- und Betriebsanleitung
Altinex
Altinex DA1914SX Bedienungsanleitung
MiLAN
MiLAN MIL-SM2401M Bedienungsanleitung
RJM
RJM MASTERMIND PBC/6X Bedienungsanleitung
Atlas
Atlas MMK-KVM8 Bedienungsanleitung
Cabletron Systems
Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung