D-Link DCH-G020 Installations- und Benutzerhandbuch

Andere Handbücher für DCH-G020

2

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link DXS-3600-16S Bedienungsanleitung

D-Link

D-Link DES-1024A Bedienungsanleitung

D-Link

D-Link DES-F1018P-E Bedienungsanleitung

D-Link

D-Link GO-SW-8GE Bedienungsanleitung

D-Link

D-Link DES-1008F Bedienungsanleitung

D-Link

D-Link DSH-16+ Bedienungsanleitung

D-Link

D-Link DGS-1210-28P/FL Bedienungsanleitung

D-Link

D-Link DU-H7 Bedienungsanleitung

D-Link

D-Link DUB-M420 Bedienungsanleitung

D-Link

D-Link DGS-1026MP Bedienungsanleitung

D-Link

D-Link DKVM-2/4 Bedienungsanleitung

D-Link

D-Link DGS-1024D - Switch Bedienungsanleitung

D-Link

D-Link DWS-3024 Bedienungsanleitung

D-Link

D-Link DES-1024D Bedienungsanleitung

D-Link

D-Link DGS-2208 - Desktop Switch Bedienungsanleitung

D-Link

D-Link DKVM-4K - KVM Switch Bedienungsanleitung

D-Link

D-Link DES-1005E Bedienungsanleitung

D-Link

D-Link DGS-8010 Bedienungsanleitung

D-Link

D-Link DSS-16+ Bedienungsanleitung

D-Link

D-Link DUB-2240 - Wireless USB Hub Bedienungsanleitung

D-Link

D-Link DES-1008P Bedienungsanleitung

D-Link

D-Link EasySmart DGS-1100-08P Bedienungsanleitung

D-Link

D-Link KVM-440 Bedienungsanleitung

D-Link

D-Link DES-7200 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Dear customer,

To restore the DCH-G020 proceed as follows

In Case the LED is flashing red

-----------------------------------------

Manual update process for the DCH-G020:

-----------------------------------------

Log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the password is the pin

on the bottom of the device.

Please upload the following firmware (unzip the file and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

After the update, reset the DCH-G020 twice to 1. Activate the new firmware and 2. Reset the Z-Wave

controller. Please wait between the reset until the device is powered up again

After that log in to the web interface of the DCH-G020 again and upload the latest firmware.

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

The DCH-G020 should be running again with a green LED.

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

In Case the LED is constantly red

-----------------------------------------

Recoveryupdate for the DCH-G020:

-----------------------------------------

Download the following firmware (unzip first and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

1. Connect your pc with a cable to your router

2. Change the IP address of your LAN port to 192.168.0.123

3. Unplug the DCH-G020 and press the Reset button while you plug it back in. Hold the Reset

button until the LED is flashing red.

4. Open http://192.168.0.60 in a Webbrowser

5. Upload the firmware 1.23b02_beta

After the Upload the LED should be green again.

If the LED is still red, the DCH-G020 is defective please issue a RMA.

If the LED is green, please change your LAN port ipv4 settings back to DHCP and reset the DCH-G020.

After the reset log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the

password is the pin on the bottom of the device.

Upload the latest firmware

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

-----------------------------------------

If you have Z-Wave devices connected to the DCH-G020 before the issue you have to do the

following for every Z-Wave device

-------------------------------------

Reset the Z-Wave Device

-------------------------------------

For every Z-Wave Device:

1. Press the connect button on the DCH-G020

(LED flashing orange)

2. Press the black pin on the back of the device four times in two seconds.

3. And hold the pin at the four times until the device pulse red down.

The device will start flashing slowly red for the next two minutes; you have now two minutes to

reconnect the device with the DCH-G020 through the APP