D-Link DES-105 Bedienungsanleitung
DES-105/108
5/8-Port 10/100Mbps
Unmanaged Switch
Manual
RECYCLABLE
V1.00
ii
ABLE OF ONTENTST C
ABOUT T
IN
UNPAC
ID
CONNECTING THE SWITCH........................................................9
C
MOUNTING THE SWITCH ON A WALL...................................11
TECHNICAL SPECIFICATIONS.................................................13
RJ-45 PIN SPECIFICATION .........................................................15
HIS GUIDE .......................................................................1
PURPOSE.............................................................................................1
TRODUCTION ..............................................................................2
FAST ETHERNET TECHNOLOGY .........................................................2
SWITCHING TECHNOLOGY.................................................................2
802.1P AND QOS................................................................................3
FEATURES ..........................................................................................4
KING AND SETUP..............................................................6
UNPACKING........................................................................................6
SETUP.................................................................................................6
ENTIFYING EXTERNAL COMPONENTS ..............................7
FRONT PANEL ....................................................................................7
REAR PANEL ......................................................................................8
ONNECTING THE SWITCH........................................................9
PC TO DES-105/108...........................................................................9
HUB TO DES-105/108........................................................................9
DES-105/108 TO OTHER DEVICES......................................................9
PORT SPEED &DUPLEX MODE ........................................................10
1
ABOUT THIS GUIDE
Congratulations on your purchase of the D-Link DES-105/108. This
device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network
capabilities in one high-performance, easy-to-use solution.
Purpose
This manual will familiarize you with the DES-105/108 and guide you
through the installation process.
2
INTRODUCTION
Fast Ethernet Technology
The growing importance of LANs and the increasing complexity of
desktop computing applications are fueling the need for high performance
networks. 100BASE-T (Fast Ethernet) provides a cost-effective and high-
performance solution for small workgroups, SMBs (Small to Medium
Businesses), and any network supporting bandwidth-intensive applications.
Fast Ethernet technology operates at 10 times the speed of traditional
Ethernet, offering maximum performance and enhanced capability for
existing Ethernet-based networks.
100Mbps Fast Ethernet is a standard specified by the IEEE 802.3 LAN
committee. It is an extension of the 10Mbps Ethernet standard with the
ability to transmit and receive data at 100Mbps, while maintaining the
CSMA/CD Ethernet protocol. Since the 100Mbps Fast Ethernet is
compatible with all other 10Mbps Ethernet environments, it provides a
straightforward upgrade and takes advantage of the existing investment in
hardware, software, and personnel training.
Switching Technology
Switching is a cost-effective way of increasing the total network capacity
available to users on a LAN. If an Ethernet network begins to display
symptoms of congestion, low throughput, slow response times, and high
rates of collision, installing a switch to a network can preserve much or all
of the existing network's cabling and workstation interface card
infrastructure, while still greatly enhancing the throughput for users. A
switch is a viable solution even if demanding applications, such as
multimedia production and video conferencing, are on the horizon. The
most promising techniques, as well as the best return on investment, could
well consist of installing the right mixture of Ethernet switches.
A switch increases capacity and decreases network loading by dividing a
local area network into different LAN segments. Dividing a LAN into
3
multiple segments is one of the most common ways of increasing available
bandwidth. If segmented correctly, most network traffic will remain within
a single segment, enjoying the full-line speed bandwidth of that segment.
Switches provide full-line speed and dedicated bandwidth for all
connections. This is in contrast to hubs, which use the traditional shared
networking topology, where the connected nodes contend for the same
network bandwidth. When two switching nodes are communicating, they
are connected with a dedicated channel between them, so there is no
contention for network bandwidth with other nodes.
For Ethernet networks, a switch is an effective way of eliminating the
problem of chaining hubs beyond the “two-repeater limit.” A switch can
be used to split parts of the network into different collision domains,
making it possible to expand your Ethernet network beyond the 205-meter
network diameter limit for 100BASE-TX networks. Switches supporting
both 10Mbps Ethernet and 100Mbps Fast Ethernet are also ideal for
bridging between existing 10Mbps networks and newer 100Mbps
networks.
Switching LAN technology is a marked improvement over the previous
generation of network hubs and bridges, which were characterized by
higher latencies. Routers have also been used to segment local area
networks, but the cost of a router, the setup and maintenance required,
make routers relatively impractical. Today switches are an ideal solution
to most kinds of local area network congestion problems.
802.1p and QoS
The DES-105/108 Switch supports 802.1p priority queuing Quality of
Service and both models provide 2 priority queues for users to prioritize
traffic.
4
Features
The DES-105/108 is a high performance switch designed specifically for
environments where traffic on the network and the number of users
increase continuously.
DES-105/108 implements D-Link’s Green Technology special power-
saving features under speed at 100Mbps that link status and adjust power
usage accordingly. Further, D-Link Green implements the newly ratified
IEEE 802.3az Energy Efficient Ethernet standard for reducing energy
consumption of network links during periods of low utilization by
transitioning interfaces into low-power state without interrupting the
network connection.
DES-105/108 has special front access design for Ethernet ports/LEDs to
help user easier to understand and control network status. Metal case
design is useful for strengthening cooling and suitable for departmental
environment, providing users the best performance. DES-105/108 was
specially designed for small to mid-size workgroups and can be installed
where space is limited.
The DES-105/108 is ideal for deployment with multiple high-speed
servers for 10Mbps or 100Mbps shared-bandwidth workgroups. With the
highest bandwidth at 200Mbps (100Mbps full-duplex mode), any port can
provide workstations with a congestion-free data pipe for simultaneous
access to the server.
The DES-105/108 is scalable, allowing two or more DES-105/108 to be
cascaded together. Since all ports support 200Mbps, any one of its five
ports may be used to cascade to an additional switch to open a Full-Duplex
Fast Ethernet pipe.
The DES-105/108 is the perfect choice for a department or office planning
to upgrade to Fast Ethernet. The DES-105/108 can accommodate 10Mbps
or 100Mbps devices, providing a flexible solution for existing (10Mbps)
Ethernet workgroups.
The DES-105/108 combines dynamic memory allocation with store-and-
forward switching to ensure that the buffer is effectively allocated for each
5
port; and it controls the data flow between the transmit and receive nodes
to guarantee against possible packet loss.
The DES-105/108 is an unmanaged 10/100Mbps Fast Ethernet switch that
offers solutions for the accelerating bandwidth needs of small Ethernet
workgroups.
Other key features include:
Supports Auto-Negotiation for 10/100Mbps and duplex mode
Supports Auto-MDI/MDIX for each port
Supports Full/Half duplex transfer mode for 10 and 100Mbps
Back pressure flow control for half duplex
Full wire speed reception and transmission
Store-and-Forward switching method
Supports 8K absolute MAC addresses
Supports 128KBytes RAM for data buffering
IEEE 802.3x flow control for full duplex
IEEE 802.1p priority queues
6
UNPACKING AND SETUP
Unpacking
Open the box and carefully unpack it. The box should contain the
following items:
One DES-105/108: 5/8-Port 10/100Mbps Ethernet Switch
One External Power Adapter
Wall Mount Kit
Quick Installation Guide
If any item is missing or damaged, please contact your local reseller for a
replacement.
Setup
The setup of the DES-105/108 can be performed using the following steps:
The power outlet should be within 1.82 meters (6 feet) of the Switch.
Visually inspect the DC power jack and make sure that it is fully
secured to the power adapter.
Do not cover the ventilation holes on the sides of the Switch, and
make sure there is adequate ventilation around it.
Do not place heavy objects on the switch.
7
IDENTIFYING EXTERNAL COMPONENTS
Front Panel
The figure below shows the front panel of the DES-105/108.
DES-105/108 10/100Mbps Fast Ethernet Switch
Power/LED:
This green indicator light is on when the DES-105/108 is receiving
power; otherwise, it is off.
100Mbps Link/Activity, 10Mbps Link/Activity Indicator
100 Link/Act (green):
There are two LED indicators for each Ethernet port. The port LEDs
indicate a network link through the corresponding port. Blinking
indicates the Switch is either sending or receiving data to the port.
When the port LED glows in green, it indicates the port is running on
10M or 100M.
Auto MDI/MDI-X Ports:
All ports support automatic MDI/MDI-X crossover detection.
The AutoMDI/MDI-X function makes it simple to connect to the
switch—just plug either a Crossover or Straight-Through CAT5 cable
into any port.
8
Rear Panel
Kensington LockKensington Lock
Power Jack:
Power is supplied through an external power adapter. Check the
technical specification section for information about the power input
voltage.
Since the DES-105/108 does not require a power button, plugging
DES-105/108 10/100Mbps Fast Ethernet Switch
its power adapter into a power outlet will immediately power it on.
Kensington Security Slot
DES-105/108 has been giving customers the best option for physical
security through a Kensington Security Slot in the rear panel. The
Kensington Security Slot adds value to DES-105/108 by offering
customers a simple, built-in security solution.
Andere Handbücher für DES-105
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere D-Link Schalten Handbücher
D-Link
D-Link DKVM-16 - KVM Switch Bedienungsanleitung
D-Link
D-Link xStack DES-3552 Series Bedienungsanleitung
D-Link
D-Link DES-3010FA Bedienungsanleitung
D-Link
D-Link DKVM-2K Bedienungsanleitung
D-Link
D-Link xStack DGS-3420-28PC Handbuch
D-Link
D-Link DSS-24+ Bedienungsanleitung
D-Link
D-Link DES-1200M Bedienungsanleitung
D-Link
D-Link DES-7210-BASE Bedienungsanleitung
D-Link
D-Link DGS-1100-05V2 Bedienungsanleitung
D-Link
D-Link DKVM-440 Bedienungsanleitung
D-Link
D-Link DGS-3130-54S Bedienungsanleitung
D-Link
D-Link DGS-3130 Series Bedienungsanleitung
D-Link
D-Link DIS-F100G Series Bedienungsanleitung
D-Link
D-Link xStack DES-3200-28P Bedienungsanleitung
D-Link
D-Link DIS-100G-10S Bedienungsanleitung
D-Link
D-Link DGS-3000 series Bedienungsanleitung
D-Link
D-Link DES-1226R Bedienungsanleitung
D-Link
D-Link Nuclias DNH-100 Bedienungsanleitung
D-Link
D-Link DES-3226S Bedienungsanleitung
D-Link
D-Link xStack DGS-3420 Series Bedienungsanleitung
Beliebte Schalten Handbücher anderer Marken
Ruijie
Ruijie RG-PF2920 Series Installations- und Betriebsanleitung
Altinex
Altinex DA1914SX Bedienungsanleitung
MiLAN
MiLAN MIL-SM2401M Bedienungsanleitung
RJM
RJM MASTERMIND PBC/6X Bedienungsanleitung
Atlas
Atlas MMK-KVM8 Bedienungsanleitung
Cabletron Systems
Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung