D-Link DIS-F100G Series Bedienungsanleitung

DIS-F100G SERIES

Gigabit Industrial PoE Switches

with Long Reach PoE Ports

Getting Started Guide for

Industrial Ethernet Switch

This document will guide you through the basic installation process

for your new D-Link Industrial Ethernet Switch.

QUICK INSTALLATION GUIDE

Documentation is also available on the D-Link website, see dlink.com.au

QUICK INSTALLATION GUIDE | DIS-F100G SERIES 2

Before You Begin

This Quick Installation Guide gives you step-by-step instructions for setting up the

DIS-F100G Series Gigabit Industrial PoE Switch. The model you have purchased may appear

slightly dierent from the one shown in the illustrations. For more detailed information

about the Switch, please refer to the user manual.

Package Contents

This package should include the following items:

• DIS-F100G Series Switch

• Terminal block

• DIN rail mounts (installed)

• Quick Installation Guide

If any of the above items are damaged or missing, please contact your local D-Link Reseller.

LED Indicators

HARDWARE OVERVIEW

LED Status Description

P1, P2 On The corresponding power source is connected

O The corresponding power source is not connected or failed

F1, F2 On or Flashing SFP port connected and active

O SFP port not connected

QUICK INSTALLATION GUIDE | DIS-F100G SERIES 3

Mounting the Switch on a DIN Rail

Before beginning either mounting or removing the DIS-F100G from a DIN rail, please

ensure that the DIN rail is level and that the DIN rail mounting kit is installed correctly on

the DIS-F100G. Use the following instructions to install the DIS-F100G on a DIN rail:

1. With the back of the DIS-F100G facing the DIN rail, lower the top part of the rail

mounting kit onto the DIN rail.

2. Push the DIS-F100G vertically down and rotate the bottom of the DIS-F100G towards

the DIN rail, to attach the Switch to the DIN rail.

Use the following instructions to remove the DIS-F100G from a DIN rail:

1. Push the DIS-F100G vertically down to create enough space at the bottom of the rail

mounting kit to remove the DIS-F100G from the DIN rail.

2. Rotate the DIS-F100G upwards to remove the bottom of the rail mounting kit from the

rail, and lift the DIS-F100G upwards to remove the whole of the Switch from the DIN rail.

Grounding the Switch

To use the DIS-F100G safely, it needs to be grounded. Connect a grounding wire to the

grounding connector on the Switch and use a Phillips head screwdriver to secure the wire.

Attach the other end of the grounding cable to an appropriate grounding source.

Grounding Wire

Before You Begin

Observe the following precautions to help prevent shutdowns, equipment failures, and

personal injury:

• Install the DIS-F100G in a cool and dry place. Refer to the technical specications in the

user manual for the acceptable operating temperature and humidity ranges.

• Leave at least 10 cm of space at the top, rear and bottom of the Switch for ventilation.

• Visually inspect the power connector and make sure that it is fully secured to the

power cord.

• Do not stack any devices on top of the Switch.

It is also recommended that power and grounding requirements are investigated before

mounting the Switch.

HARDWARE INSTALLATION

QUICK INSTALLATION GUIDE | DIS-F100G SERIES 4

Using the Terminal Connections

Before proceeding, ensure that all power sources have been disconnected from the

DIS-F100G, and that the power source you are wiring to the DIS-F100G is also disconnected.

Use the following instructions to power the DIS-F100G using the terminal connections:

1. Before continuing, consult the diagram above to decide which wires from the power

source need to connect to which contacts on the terminal block. Note that two power

sources can be used; one inserted into P1+ / P1- and the other inserted into P2+ / P2-.

If you only wish to use one power source, insert the wires into P1+ / P1-.

2. Using a at head screwdriver, loosen the connections in the terminal block by un-screwing

the terminal connections that you wish to use.

3. Insert the wires into the terminal connections and use the screwdriver to tighten the

screws to secure the wires.

4. Re-insert the terminal block into the terminal block socket on the DIS-F100G.

Connecting to a Power Source

The DIS-F100G can be powered using the in-built terminal connector. This allows dual power

inputs, using wires from the power source(s) screwed-in to the terminal connections.

Input voltage is 48 to 56V DC

The Switch oers built-in over current protection and power supply reverse connection

protection.

QUICK INSTALLATION GUIDE | DIS-F100G SERIES 5

Shortcut Buttons (DIP Switches)

Some advanced Switch functionality can be enabled using the Shortcut Buttons (DIP Switches).

Additional Information

You can refer to the user manual or visit https://support.dlink.com.au/ for more support.

SAFETY INSTRUCTIONS

The following general safety guidelines are provided to help ensure your own

personal safety and protect your product from potential damage. Remember to

consult the product user instructions for more details.

• Static electricity can be harmful to electronic components. Discharge static

electricity from your body (i.e. touching grounded bare metal) before touching

the product.

• Do not attempt to service the product and never disassemble the product.

For some products with user replaceable battery, please read and follow the

instructions in the user manual.

• Do not spill food or liquid on your product and never push any objects into

the openings of your product.

• Do not use this product near water, areas with high humidity or condensation

unless the product is specically rated for outdoor application.

• Keep the product away from radiators and other heat sources.

• Always unplug the product from mains power before cleaning and use a dry

lint free cloth only.

DIP Switch Function when in ON position

AI VLAN

Isolates RJ45 ports from each other, suppress network storms and

improves network performance. Uplink SFP ports continue to

communicate with all ports.

AI Extend Enables Long Reach PoE delivery up to 250m on PoE ports. Port speed

changes to 10Mbps (Cat 5 or better cabling is recommended)

AI PoE

Automatically restart a remote device by disabling and re-enabling

PoE on the port if it detects the remote device has locked up

(no incoming trac).

AI QOS Enables application prioritisation. Trac with higher priority

(e.g. Voice over IP) will be forwarded ahead of the queue.

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link DGS-3024 Bedienungsanleitung

D-Link

D-Link DGS-1210-28P Bedienungsanleitung

D-Link

D-Link DGS-3308TG Bedienungsanleitung

D-Link

D-Link DE-805TP - 10Mbps Ethernet Mini Hub Bedienungsanleitung

D-Link

D-Link DES-3326SRM Bedienungsanleitung

D-Link

D-Link DGS-1024D - Switch Bedienungsanleitung

D-Link

D-Link KVM-222 Bedienungsanleitung

D-Link

D-Link DGS-1520-52 Bedienungsanleitung

D-Link

D-Link DGS-1024T - Switch Bedienungsanleitung

D-Link

D-Link DE-1824EI Bedienungsanleitung

D-Link

D-Link DUB-2340 Bedienungsanleitung

D-Link

D-Link DGS-3420-28TC Bedienungsanleitung

D-Link

D-Link DES-3226S Bedienungsanleitung

D-Link

D-Link DKVM-222 Bedienungsanleitung

D-Link

D-Link DGS-1224TP - Web Smart Switch Bedienungsanleitung

D-Link

D-Link DUB-H4 - Hub - USB Bedienungsanleitung

D-Link

D-Link DGS-3710 Series Handbuch

D-Link

D-Link DES-815 Bedienungsanleitung

D-Link

D-Link DUB-H7 - Hub - USB Bedienungsanleitung

D-Link

D-Link DWS-3160 Series Bedienungsanleitung

D-Link

D-Link 55443 Bedienungsanleitung

D-Link

D-Link DGS-3000-20L Bedienungsanleitung

D-Link

D-Link DES-3326SRM Bedienungsanleitung

D-Link

D-Link DGS-1510 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung