D-Link DI-624M - Wireless 108G MIMO Router Bedienungsanleitung

5V DC Power Adapter

specificationssubjecttochangewithoutnotice.DI-624M.12272004

Before You Begin

1.1.

1. Ifyoupurchasedthisroutertoshareyourhigh-speedInternetconnectionwithother

computers,you must have either an Ethernet-based Cable or DSL modem with an

establishedInternetaccountfromanInternet Service Provider(ISP).

2.2.

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-624MSuper G MIMO Wireless Router.The DI-624M acts asa DHCPserver

and will assign all the necessary IP address information on your network. See

Appendix at the end of this Quick Installation Guide or the Manual on the CD-

ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-624M Super G MIMO Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

Using a power supply with

a different voltage rating will

damage and void the warranty

of this product.

If any of the above items are missing, please contact your reseller.

This product can be set up usingThis product can be set up using

This product can be set up using

anan

any curry curr

y curry curr

y currenen

enen

ent web brt web br

t web brt web br

t web browserowser

owserowser

owser, i.e, i.e

, i.e, i.e

, i.e.,.,

.,.,

Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Navigator 7.Navigator 7.

Navigator 7.

DI-624M

Super G MIMOSuper G MIMO

Super G MIMO

Wireless RouterWireless Router

Wireless Router

Connecting The DI-624M Wireless Router

To Your Network

A. First, connect the power adapter to the receptor at the back panel of the

DI-624M and then plug the other end of the power adapter to a wall outlet or

power strip. The Power LED will turn ON to indicate proper operation.

B. 1. Power off your Cable or DSL modem; some devices may not have a on/off

switch and will require you to unplug the power adapter. Now, the DI-624M

should be powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem (Power Off) – DI-624M (Power On)

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable /

DSL modem by turning on the unit or plugging in the power adapter.

3. Cable / DSL modem (Power On) – DI-624M (Power On)

Insert the other end of the Ethernet cable to the WAN PORT on the back panel

of the DI-624M. The WAN LED light will illuminate to indicate proper connection.

If the WAN LED is not illuminated, please go back to step B1 and repeat the

instructions.

C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-624M and an

available Ethernet port on the network adapter in the computer you will use to

configure the DI-624M. The LED light for LAN Port 1 will illuminate to indicate

proper connection. (Note: The LAN Ports on the DI-624M are Auto-MDI/MDIX.

Meaning you can use a straight-through or crossover Ethernet cable to the LAN

Ports.)

D. Computers equipped with 802.11g wireless adapters will be able to connect to

the DI-624M. The DWL-G650M Super G MIMO Wireless Cardbus Adapter and

the DWL-G520 AirPlus Xtreme G Wireless PCI Adapter will be able to connect

out of the box with the router using their default wireless settings.

B. WAN PORT

This is for the connection

of an Ethernet cable to the

Cable or DSL modem

D. Antennas

Used to

wirelessly

connect to

802.11g or

802.11b

adapters.

C. LANPORTS

These are the

connections for Ethernet

cables to Ethernet

enabled computers.

A. Receptor for

Power Adapter.

Reset Button

Pressing this button restores the Router to its original

factory default settings.

Restart Your Computer

Connecting Additional Computers

To The DI-624M

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

UsingadditionalEthernet (CAT5UTP) cables,connect yourEthernet-equippedcomputers

to the remaining Ethernet LAN ports on the back panel of the DI-624M.

LOCAL NETWORK LEDs –a

solid light on the port indicates

a connection to an Ethernet

enabled computer on ports 1-4.

This LED blinks during data

transmission.

Power LED – a solid

light indicates a proper

connection to the power

supply.

WLAN LED – a solid light

indicates that the wireless

segment is ready. This LED

blinks during wireless data

transmission.

Status LED – a blinking light

indicates that the DI-624 is

functioning properly.

WAN LED – a solid light

indicates connection on the

WAN port. This LED blinks

during data transmission.

Onceyouhave logged in, the

Home screenwillappear.

Click Run Wizard

Using The Setup Wizard

Thelogon pop-up screenwill appear.

Open your Web browser and

type “http://192.168.0.1” intothe

URLaddressbox.Thenpressthe

Enter orReturn key.

Type “admin” for the username and

leavethe password field blank.

ClickOK

TheDI-624MisaSuperGMIMOwirelessrouteridealforhomenetworking

and small business networking. The setup wizard will guide you to

configuretheDI-624M to connecttoyour ISP(InternetService Provider).

TheDI-624M’s easy setup will allow you to have Internet access within

minutes. Please follow the setup wizard step by step to configure the

DI-624M.

The Setup Wizard (continued)

You will see the following screens

Set up your new password.

You have the option to establish

apassword.

Click Next

Choose your time zone from

the drop down list.

Click Next

If you selected Dynamic IP Ad-

dress,thisscreenwillappear:

(Usedmainly for Cable Internet

service.)

Click the“Clone MAC Address”

button to automatically copy the

MAC address of the network

adapter in your computer. You can

also manually type in the MAC

address.

The Setup Wizard (continued)

Select your Internet Connection.

You will be prompted to select the

typeofInternet connection for your

router.

If you are unsure of which setting

to select, please contact your

Internet Service Provider.

Click Next

This setup should be done on

the computer that is registered

on the ISP’s network.

Please continue to Wireless Setup.

A this point, the setup wizard will try

toauto-detectyour Internet connec-

tion type. If you have a Dynamic or

PPPoE connection, you will be

broughtto the corresponding page.

Otherwise, you will see the following screen:

The Setup Wizard (continued)

If your ISP requires a Static IP

Address,and this option is

selected, then this screen will

appear:

EntertheIP address information

originallyprovidedtoyouby your

ISP.You will need to complete all

therequired fields.

Click Next

Please continue to Wireless Setup.

If your ISP uses PPPoE (Point-to-

PointProtocol over Ethernet), and

this option is selected, then this

screen willappear: (Used mainly for

DSLInternetservice.)

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and pass-

wordprovidedtoyouby your ISP.

Click Next

Please continue to Wireless Setup.

If you wish to use encryption for

your802.11g network, theDI-624M

iscapable of two levels of wireless

encryption - 64-bit and 128-bit. By

default the encryption is dis-

abled. You can change the encryp-

tion settings for more secure

wirelesscommunication.

The Setup Wizard (continued)

Thedefaultwireless settings for

your802.11g wireless network are:

SSID = default

Channel = 6

You can change these settings to

match an existing wireless network.

Click Next

Wireless Setup

Click Next

Your Setup is Complete!

ClickRestart

Click Close

Test Internet Connection

You will be returned to the Home tab.

Foradditionalsettings or information,

refer to the Advanced, Tools, or

Statustabs ontheweb-management

interface; or to the Manual located on

theCD.

Then relaunch yourWebbrowser

(i.e.,Internet Explorer or Netscape

Navigator), to link to your favorite Web

site to test your Internet connection.

Click toExit

TheDI-624MisaSuperGMIMOwirelessrouteridealforhomenetworking

and small business networking. The setup wizard will guide you to

configuretheDI-624M to connecttoyour ISP(InternetService Provider).

TheDI-624M’s easy setup will allow you to have Internet access within

minutes. Please follow the setup wizard step by step to configure the

DI-624M.

To connect to the network, make sure the

networkadapterin your computer is configured

properly.Here’showtoconfigurethe network

adapter to obtain an IP address automatically

forthe DI-624MWireless Broadband Router.

APPENDIX (continued)

Restart your computer (ifnecessary)

ClickOK

Select Obtain an IP address

automatically

Click Internet Protocol (TCP/IP)

ClickProperties

For Microsoft Windows XP: Go to Start >

right click on My Network Places >

select Properties > Right click on the

Network Connection associated with the

Ethernet adapter and select Properties

(i.e.,D-Link DFE-530TX+).

Andere Handbücher für DI-624M - Wireless 108G MIMO Router

Inhaltsverzeichnis

Andere D-Link WLAN-Router Handbücher

D-Link

D-Link DIR-855 - Xtreme N Duo Media Router Wireless Bedienungsanleitung

D-Link

D-Link DIR-1950 Bedienungsanleitung

D-Link

D-Link AirPlusXtremeG DI-624 Bedienungsanleitung

D-Link

D-Link Express EtherNetwork DI-604+ Bedienungsanleitung

D-Link

D-Link DWR-932 Bedienungsanleitung

D-Link

D-Link DSL-2740R Bedienungsanleitung

D-Link

D-Link DIR-810L Bedienungsanleitung

D-Link

D-Link DVG-N5402SP Bedienungsanleitung

D-Link

D-Link DI-524 - AirPlus G Wireless Router Bedienungsanleitung

D-Link

D-Link DIR-842 Bedienungsanleitung

D-Link

D-Link AirPro DI-754 Bedienungsanleitung

D-Link

D-Link DSL-2640B Bedienungsanleitung

D-Link

D-Link Vonage Bedienungsanleitung

D-Link

D-Link DIR-400 Bedienungsanleitung

D-Link

D-Link Ethernet Broadband Router DIR-100 Bedienungsanleitung

D-Link

D-Link DIR-615 - Wireless N Router Bedienungsanleitung

D-Link

D-Link DSL-3590L Bedienungsanleitung

D-Link

D-Link DSL-2740B Bedienungsanleitung

D-Link

D-Link DVG-5802S Bedienungsanleitung

D-Link

D-Link AirPro DI-764 Bedienungsanleitung

D-Link

D-Link DSL-2877AL Bedienungsanleitung

D-Link

D-Link DIR-882-US Bedienungsanleitung

D-Link

D-Link DSL-2640U Bedienungsanleitung

D-Link

D-Link DWR-956M Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung

BlueBOLT

BlueBOLT BB-ZB1 Bedienungsanleitung