D-Link DI-774 - Air Xpert Wireless Router Bedienungsanleitung

DI-774

Tri-Mode Dualband

Wireless Router

5V 3A DC Power Adapter

specifications subject to change without notice. DI-774. 03282003

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other

computers, you must have either an Ethernet-based Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-774 Tri-Mode Dualband Wireless Router. The DI-774 acts as a DHCP server

and will assign all the necessary IP address information on your network. See

Appendix at the end of this Quick Installation Guide or the Manual on the CD-

ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-774 Tri-Mode Dualband Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (Straight Through) Cable

Using a power supply

with a different voltage

rating will damage and void

the warranty of this product.

If any of the above items are missing, please contact your reseller.

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 6.2.3.

Connecting The DI-774 Wireless Router To

Your Network

C. LAN PORTS These

are the connections

for Ethernet cables to

Ethernet enabled

computers.

Reset Button

Pressing this button restores the Router to

its original factory default settings.

A. First, connect the power adapter to the receptor at the back panel of the DI-774

and then plug the other end of the power adapter to a wall outlet or power strip. The

Power LED will turn ON to indicate proper operation.

B. 1. Power off your Cable or DSL modem; some devices may not have a on/off

switch and will require you to unplug the power adapter. Now, the DI-774 should be

powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem (Power Off) – DI-774 (Power On)

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable / DSL

modem by turning on the unit or plugging in the power adapter.

3. Cable / DSL modem (Power On) – DI-774 (Power On)

Insert the other end of the Ethernet cable to the WAN PORT on the back panel of

the DI-774. The WAN LED light will illuminate to indicate proper connection. If the

WAN LED is not illuminated, please go back to step B and repeat its instructions.

C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-774 and an

available Ethernet port on the network adapter in the computer you will use to

configure the DI-774. The LED light for LAN Port 1 will illuminate to indicate proper

connection. (Note: The Ports on the DI-774 are Auto-MDI/MDIX. Meaning you can

use a straight-through or crossover Ethernet cable to the WAN and LAN Ports.)

D. Computers equipped with D-Link 802.11a/b/g wireless adapters will be able to

connect to connect out of the box with the DI-774 using their default wireless

settings.

B. WAN PORT

This is for the connection

of an Ethernet cable to the

Cable or DSL modem

D. Antennas

Used to

wirelessly

connect to

802.11a/b/g

adapters.

A. Receptor for

Power Adapter.

Restart Your Computer

Connecting Additional Computers To

The DI-774

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped

computers to the remaining Ethernet LAN ports on the back panel of the DI-774.

M1 LED – a solid

light indicates

that the DI-774 is

ready.

M2 LED – A solid light indicates

that the unit is defective.

WAN LED – a

solid light indicates

connection on the

WAN port. This

LED blinks during

data transmission.

LOCAL NETWORK

LEDs – a solid light

on the port indicates a

connection to an

Ethernet enabled

computer on ports 1-4.

This LED blinks during

data transmission.

POWER LED – a solid

light indicates a proper

connection to the

power supply.

The Ports on the DI-774 are Auto-MDI/MDIX. Meaning you can use a

straight-through or crossover Ethernet cable to the WAN and LAN Ports.

11a and 11g LEDs – a

solid light indicates that

the wireless segment is

ready. This LED blinks

during wireless data

transmission.

When you have completed the steps in this Quick Installation

Guide, your connected network should look similar to this:

Using The Setup Wizard

The logon pop-up screen will appear.

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

Type “admin” for the username and

leave the password field blank.

Click OK

The Setup Wizard (continued)

Once you have logged in, the

Home screen will appear.

You will see the following

screens

Set up your new password.

You have the option to

establish a password.

Click Run Wizard

Click Next

The Setup Wizard (continued)

Select your Internet

Connection. You will be

prompted to select the type

of Internet connection for

your router.

Click Next

Choose your time zone

from the drop down list.

Click Next

If you are unsure of which setting to

select, please contact your Internet

Service Provider.

The Setup Wizard (continued)

If your ISP requires a Static IP

Address, and this option is

selected, then this screen will

appear:

Enter the IP address

information

originally provided to you by

your ISP. You will need to

complete all the required fields.

Click Next

If you selected Dynamic IP

Address, this screen will appear:

(Used mainly for Cable Internet

service.)

Click the “Clone MAC Address”

button to automatically copy the

MAC address of the network

adapter in your computer. You

can also manually type in the

MAC address.

Click Next

This setup should be done on

the computer that is registered

on the ISP’s network.

Please continue to the last part of step 4, 802.11g Wireless Setup.

The Setup Wizard (continued)

If your ISP uses PPPoE

(Point-to-Point Protocol over

Ethernet), and this option is

selected, then this screen will

appear: (Used mainly for DSL

Internet service.)

The default wireless settings

for your 802.11g wireless

network are:

SSID = default

Channel = 1

You can change these settings

to match an existing wireless

network.

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and

password provided to you by

your ISP.

Click Next

802.11g Wireless Setup

If you wish to use encryption

for your 802.11g network, the

DI-774 is capable of three

levels of wireless encryption -

64-bit, 128-bi, and 152-bit. By

default the encryption is

disabled. You can change

the encryption settings for

more secure wireless commu-

nication.

The Setup Wizard (continued)

Click Next

The default wireless settings

for your 802.11a wireless

network are:

SSID = default

Channel = 52

You can change these settings

to match an existing wireless

network.

802.11a Wireless Setup

Click Next

Your Setup is Complete!

Click Restart

Click Next

The Setup Wizard (continued)

If you wish to use encryption

for your 802.11a network, the

DI-774 is capable of three

levels of wireless encryption -

64-bit, 128-bit, and 152-bit. By

default the encryption is

disabled. You can change

the encryption settings for

more secure wireless commu-

nication.

Andere Handbücher für DI-774 - Air Xpert Wireless Router

Inhaltsverzeichnis

Andere D-Link WLAN-Router Handbücher

D-Link

D-Link DSL-2750E Handbuch

D-Link

D-Link Wireless VPN Router DI-824VUP Gebrauchsanweisung

D-Link

D-Link DIR-632 Bedienungsanleitung

D-Link

D-Link DIR-810L Bedienungsanleitung

D-Link

D-Link AirPremier DWL-1750 Bedienungsanleitung

D-Link

D-Link AirPlus DI-614+ Bedienungsanleitung

D-Link

D-Link N 150 Bedienungsanleitung

D-Link

D-Link DIR-605L Bedienungsanleitung

D-Link

D-Link IRX1860A1 Bedienungsanleitung

D-Link

D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Bedienungsanleitung

D-Link

D-Link DWL-6720AP Bedienungsanleitung

D-Link

D-Link DAP-1350 Bedienungsanleitung

D-Link

D-Link DSL-7850U Bedienungsanleitung

D-Link

D-Link AirPro DI-764 Bedienungsanleitung

D-Link

D-Link AirPlusXtremeG DI-624 Bedienungsanleitung

D-Link

D-Link DSL-2730B Bedienungsanleitung

D-Link

D-Link DSP-W115 Bedienungsanleitung

D-Link

D-Link Covr Bedienungsanleitung

D-Link

D-Link DIR-L1900 Bedienungsanleitung

D-Link

D-Link DWR-933 Bedienungsanleitung

D-Link

D-Link DIR-451 - 3G Mobile Router Bedienungsanleitung

D-Link

D-Link DIR-412 Bedienungsanleitung

D-Link

D-Link DSR-150N Bedienungsanleitung

D-Link

D-Link DIR-626L Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung

BlueBOLT

BlueBOLT BB-ZB1 Bedienungsanleitung