D-Link DSL-2750E Handbuch
-1-
FAQ : How to Configure 3G Fail-over on DSL-2750E
Technical Support Setup Procedure
FAQ: How to Configure 3G Fail-over on DSL-2750E
Release date: 24/10/2014
Model Support: DSL-2750E
H/W: T1
S/W: 1.09 or Above
-2-
FAQ : How to Configure 3G Fail-over on DSL-2750E
Technical Support Setup Procedure
3G Dongle 3G Fail Over DSL-2750E
1: , , ,
Address IP Address DSL-2750E 192.168.1.1
Enter
2: (User Name)
(Password) “admin”
Log In
-3-
FAQ : How to Configure 3G Fail-over on DSL-2750E
3:
Advanced > 3G Configuration)
3G Configuration
USB DSL-2750E 3G Dongle
Compatible) Fail Over ADSL WAN
Note:
1. 3G ADSL WAN
ADSL down WAN 3G
2.3G Dongle Compatible list www.dlink.com.sg
-4-
FAQ : How to Configure 3G Fail-over on DSL-2750E
1. 3G dongle USB DSL-2750E
2. 3G StatusReady
3. Add
-5-
FAQ : How to Configure 3G Fail-over on DSL-2750E
4: Enable 3G Service
ISP SIM Card 3G Dongle
ISP ISP Manual
-6-
FAQ : How to Configure 3G Fail-over on DSL-2750E
5:
Backup Mechanism DSL DSL Line
Ethernet WAN ADSL WAN 3G
Backup Mechanism IP Check
ping ping3G
IP Address
Apply
-7-
FAQ : How to Configure 3G Fail-over on DSL-2750E
6: 3G Connected
3G
3G disconnect (ADSL/Ethernet WAN)
-8-
FAQ : How to Configure 3G Fail-over on DSL-2750E
Technical Support Setup Procedure
How to Configure 3G Fail-over on DSL-2750E
Step 1: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar, enter the LAN IP Address of the DSL-2750E. The default ip address is 192.168.1.1. Press ‘Enter’
key on your keyboard.
Note: Please enter the new ip address of the router if you have changed it.
Step 2: A login screen will appear, type in the User Name and Password as “admin” all in lower case
(This is the default setting, please enter the new username and password if you have changed it).
Click on the Log In button.
-9-
FAQ : How to Configure 3G Fail-over on DSL-2750E
Step 3: You are now at the DSL-2750E web interface. Click on “Advanced>3G Configuration”.
3G Connection:
The USB Port on DSL-2750E supports compatible 3G dongle connection that can do fail-over when
both ADSL and Ethernet WAN connection is down.
Note:
1. 3G will only trigger to dial when both ADSL & Ethernet WAN is down. Even ADSL is down,
3G will not trigger as long as Ethernet WAN is still on.
2. Please download the latest 3G Dongle Compatibility List from www.dlink.com.sg
1. Plug in the 3G dongle into the USB port of DSL-2750E.
2. Please check that the ‘3G Status’ is shown as ‘Ready’.
3. Click on “Add” button.
-10-
FAQ : How to Configure 3G Fail-over on DSL-2750E
Step 4: Click on “Enable 3G Service” checkbox.
Select your country and the ISP profile name of the SIM card that you insert into the 3G dongle.
If your ISP profile is not in the list, please contact your ISP to configure the parameters manually.
Andere Handbücher für DSL-2750E
12
Inhaltsverzeichnis
Sprachen:
Andere D-Link WLAN-Router Handbücher
D-Link
D-Link SharePort Go II N300 Bedienungsanleitung
D-Link
D-Link DSL-2500U Bedienungsanleitung
D-Link
D-Link DIR-815 Bedienungsanleitung
D-Link
D-Link Ethernet Broadband Router DIR-100 Bedienungsanleitung
D-Link
D-Link AC750 Bedienungsanleitung
D-Link
D-Link DI-524 - AirPlus G Wireless Router Bedienungsanleitung
D-Link
D-Link DSL-2640B Bedienungsanleitung
D-Link
D-Link SharePort DIR-825 Bedienungsanleitung
D-Link
D-Link DIR-626L Bedienungsanleitung
D-Link
D-Link DSL-2642B Installations- und Benutzerhandbuch
D-Link
D-Link DIR-825/AC Bedienungsanleitung
D-Link
D-Link GO-RT-AC750 Bedienungsanleitung
D-Link
D-Link DIR-905L Bedienungsanleitung
D-Link
D-Link DSR-500N Bedienungsanleitung
D-Link
D-Link DSL-2870B Bedienungsanleitung
D-Link
D-Link DSL-2750U Bedienungsanleitung
D-Link
D-Link DIR-1935 Bedienungsanleitung
D-Link
D-Link DIR-868L Installations- und Betriebshandbuch
D-Link
D-Link DI-724P Bedienungsanleitung
D-Link
D-Link DSL-2740R Bedienungsanleitung
