D-Link DVG-G1402S - Wireless Broadband VoIP Router Bedienungsanleitung

Version 1.0

DVG-G1402S

Wireless G VoIP Router

2 D-Link Systems, Inc.

DVG-G1402S Install GuideSystem Requirements

System Requirements

Computer with Windows® XP or 2000

Internet Explorer 6.0 or Netscape® Navigator 7.0 and above

An available Ethernet port on the network

A subscription with a VoIP service provider.

Manual and Software

on CD

Package Contents

D-Link DVG-G1402S

Wireless G VoIP Router

Ethernet Cable 12V 1.25A Power Supply

It’s best to use the same computer that is connected to your router for

conﬁguring the DVG-G1402S Router. The DVG-G1402S acts as a DHCP

server and will assign all the necessary IP address information on your

network. See the Quick Installation Guide or the Manual on the CD-ROM

for setting each network adapter to automatically obtain an IP address.

If any of the above items are missing, please contact your reseller.

Phone Cable

Warning: Using a power

supply with a different voltage

will cause damage and void

the warranty for this product.

D-Link Systems, Inc. 3

DVG-G1402S Install Guide Hardware Overview

Front Panel

Alarm LED

The Alarm LED will light solid

red if the self-test or bootup

fails. The Alarm LED will ﬂash

red slowly when the device is

booting.

Power LED

Solid indicates a

connection to a good

power source.

Phone LEDs

This LED displays the VoIP status and Hook/

Ringing activity on the phone port that is used

to connect your normal telephone(s).

MWI: Lights to indicate a voicemail is waiting.

Hook/Ring: If a phone connected to a phone

port is off the hook or in use, this LED will light

solid. When a phone is ringing, the indicator

will blink.

Status LED

The Status LED will turn on when

the router is connected to a VoIP

service provider. This light will turn

off if not connected to a service

provider.

WLAN LED

A steady light indicates a wireless

connection. A blinking light indicates

that the DVG-G1402S is receiving/

transmitting from/to the wireless

network.

Prov LED

A blinking light indicates the router

is attempting to connect with the

VoIP service provider. Once the

service connects, the LED will

turn off.

WAN LEDs

When a connection is established the 10 or 100

LED will light up solid. The LED will blink to indictate

activity. If the 10 or 100 LED does not light up when a

cable is connected, verify the cable connections and

make sure your devices are powered on.

LAN LEDs

When a connection is established the 10

or 100 LED (bottom) will light up solid on

the appropriate port. The LEDs will blink to

indictate activity. If the 10 or 100 LED does

not light up when a cable is connected,

verify the cable connections and make

sure your devices are powered on.

4 D-Link Systems, Inc.

DVG-G1402S Install GuideHardware Overview

Rear Panel

Phone Ports

Connect to your phones

using standard phone

cabling (RJ-11).

LAN Ports

Connect to your Ethernet

enabled computers using

Ethernet cabling.

WAN Port

Connects to your broadband modem

using an Ethernet cable.

Reset Button

This button will restore the factory

default settings of the DVG-G1402S.

Power Receptor

Receptor for the provided

power adapter.

Antenna

Connects to a wireless

network.

D-Link Systems, Inc. 5

DVG-G1402S Install Guide Installing the Hardware

Installing the Hardware

A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back

panel of the DVG-G1402S and the other end of the cable to an Ethernet

Adapter or available Ethernet port on your computer.

C. Insert a telephone cable into the Phone port, then connect the cable to your

telephone line.

B. Insert one end of the Ethernet cable into the WAN port on the back of the

DVG-G1402S and the other into your cable/DSL modem or the LAN port

of your router.

6 D-Link Systems, Inc.

DVG-G1402S Install GuideInstalling the Hardware

D. Connect the power adapter to the power input at the back panel of the

DVG-G1402S and then plug the other end of the power adapter to a wall

outlet or power strip. On the front of the device, the Power LED will turn ON

to indicate proper operation.

E. Check the LED display on the front of the Router to conﬁrm that the

connections have been made.

Once you’ve completed your DVG-G1402S installation, your network may appear

similar to the diagram below.

Installing the Hardware (continued)

D-Link Systems, Inc. 7

DVG-G1402S Install Guide Conﬁguration

Note: if you have changed the default IP address assigned to the DVG-G1402S, make

sure to enter the correct IP address.

Open a web browser and type in the IP

address of the DVG-G1402S.

Prior to using your Web browser for web-based management, if DHCP is

not enabled on your computer, be sure to assign a static IP address to your

computer. For Macintosh OSX, refer to page 15.

Windows 2000/XP: Go to Start > right-click My Network Places > select

Properties > Right-click Local Area Connection > select Properties >

double-click Internet Protocol (TCP/IP).

Set your PC’s IP address to

192.168.15.15 and the subnet mask

to 255.255.255.0. The default gateway

and primary DNS server IP addresses

should be set to the LAN IP address of

the DVG-G1402S (192.168.15.1).

Click OK.

To access the web-based conﬁguration utility, open a web browser such as

Internet Explorer and enter the IP address of the DVG-G1402S.

Conﬁguration

8 D-Link Systems, Inc.

DVG-G1402S Install GuideConﬁguration

Click on Run Wizard.

Click Next.

Conﬁguration (continued)

Click Next.

Enter a NTP server or leave

blank to use the default server.

Select your time zone from the

drop-down menu.

D-Link Systems, Inc. 9

DVG-G1402S Install Guide Conﬁguration

Conﬁguration (continued)

Click Next.

Select a channel. For best results,

use 1, 6, or 11. Enter the SSID, or

Service Set Identiﬁer, which is the

workgroup name of your Wireless

Network. All devices must all have

the same SSID to communicate

on the wireless network. The SSID

can be up to 32 characters and is

case-sensitive.

Select the Authentication Type:

None, WEP, or WPA-PSK.

Click Next.

If you selected WEP, enter the

Encryption Type (Hex or ASCII),

the encryption level (64, 128, or

152-bit), and the WEP key.

10 D-Link Systems, Inc.

DVG-G1402S Install GuideConﬁguration

Conﬁguration (continued)

Click Next.

If you selected WPA-PSK, enter the

Passphrase. The passphrase must

be between 8 and 63 characters.

Select your Internet connection

type:

Dynamic - Most Cable ISPs or if

you are connecting the

DVG-G1402S behind a router.

Static - Select if your ISP supplied

you with your IP settings.

PPPoE - Most DSL ISPs

Click Next.

If you selected Dynamic, enter

a host name (optional). If you are

connecting directly to a cable

modem, enter the MAC address of

the network adapter that was last

connected to the modem. If you are

using the computer that was last

connected direclty to the modem,

click Clone MAC Address.

Click Next.

For more information on WEP and WPA security, please refer to the section on Wireless

Security on page 12.

Andere Handbücher für DVG-G1402S - Wireless Broadband VoIP Router

Inhaltsverzeichnis

Andere D-Link WLAN-Router Handbücher

D-Link

D-Link DWR-330 Bedienungsanleitung

D-Link

D-Link E15 Bedienungsanleitung

D-Link

D-Link DSL-2740U Bedienungsanleitung

D-Link

D-Link DWR-932C Bedienungsanleitung

D-Link

D-Link DIR-660 Bedienungsanleitung

D-Link

D-Link myPocket DIR-457 Bedienungsanleitung

D-Link

D-Link DI-634M Bedienungsanleitung

D-Link

D-Link DSL-2740R Bedienungsanleitung

D-Link

D-Link DHP-1320 Bedienungsanleitung

D-Link

D-Link DIR-900L Bedienungsanleitung

D-Link

D-Link DSL-2640T Bedienungsanleitung

D-Link

D-Link DSL-G624T Bedienungsanleitung

D-Link

D-Link DIR-514 Installationsanleitung

D-Link

D-Link DIR-300 - Wireless G Router Bedienungsanleitung

D-Link

D-Link DSL-2750U Handbuch

D-Link

D-Link DIR-905L Bedienungsanleitung

D-Link

D-Link COVR-C1203 Handbuch

D-Link

D-Link DWR-730 Bedienungsanleitung

D-Link

D-Link DIR-890L Bedienungsanleitung

D-Link

D-Link DIR-842 Bedienungsanleitung

D-Link

D-Link DWR-2101 Bedienungsanleitung

D-Link

D-Link DIR-867 Bedienungsanleitung

D-Link

D-Link N 150 Bedienungsanleitung

D-Link

D-Link DWR-910 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung

BlueBOLT

BlueBOLT BB-ZB1 Bedienungsanleitung