D3D D10 Bedienungsanleitung

1| P a g e

D3D Wi-Fi GSM Smart Alarm System -User Manual

D3D Wi-Fi / GSM Smart Alarm system (Model : D10). Please read all instructions carefully & follow

steps for easy home installation.

2| P a g e

D3D Wi-Fi / GSM alarm system provide dual security using internet and GSM communication.

Wi-Fi is the default method of all communication, but GSM communication is also present as

alternative method of sending alerts in case Wi-Fi signals are lost.

Installation of D3D Wi-Fi system is very easy. Following configuration need to be done to use the

system.

•Insert SIM card into the system (Follow instructions page 17)

•Download & install mobile application (Follow instructions page 5)

•Configure sensors, siren & doorbell with control unit (Follow instructions page 8-12)

•Configure settings for Zone, mobile alerts / SMS etc. (Follow instructions page 15-19)

•Fix sensors & control unit on required areas (Follow instructions page )

For step by step installation video, please visit https://www.d3dsecurity.com/installation-videos/

OR contact suppor[email protected]

3| P a g e

Contents

Initialize Control Unit..................................................................................................................5

Mobile App Installation ..............................................................................................................6

User Registration on Mobile Application ................................................................................6

Configure System with Mobile App..........................................................................................7

Zone Information for Each Sensor Type.................................................................................8

Configure Remote with Control Unit........................................................................................9

Configure PIR with Control Unit.............................................................................................10

Configure Door Sensor with Control Unit .............................................................................11

Configure Door Bell with Control Unit...................................................................................12

Configure Siren with Control Unit ..........................................................................................13

Configure Smart Switch with Control Unit............................................................................14

Authorize Family Members to Access the System .............................................................15

Mobile Application Introduction & Settings ..........................................................................16

Phone Number Settings:..........................................................................................................18

4| P a g e

Alarm Sound Settings: .............................................................................................................19

Zone Settings: ...........................................................................................................................20

Arm/Alarm Delay Settings............................................................................................................22

Auto Arm/Disarm..........................................................................................................................22

Password Settings:...................................................................................................................23

Alerts Settings:..........................................................................................................................23

Time Settings:............................................................................................................................24

CID Settings:..............................................................................................................................24

Factory Reset Settings ............................................................................................................25

FAQs ...........................................................................................................................................26

Systems Notes: .........................................................................................................................27

5| P a g e

Initialize Control Unit

Pic 1 Pic 2

•Open the back panel of control unit and insert an active GSM sim card (Pic 1)

•Connect the power adaptor (Pic 2). Make sure the power switch at back of unit is

switched ON

6| P a g e

Mobile App Installation

A. Search and install mobile application ”wisen” from Google play or App store.

A. Alternatively, scan the below QR Code to install the mobile application.

User Registration on Mobile Application

Open the mobile application and click on ‘Register’. Enter email id and any password to register and

click on ‘Register’ button. Now check confirmation email sent to the registered email id. Re-open

mobile application and login with registered email id & password

7| P a g e

Configure System with Mobile App

Click top right “+” to add new device. Screen 1 (below) will be displayed. Select option ‘Wi-Fi

configuration’

On Screen 2, your Wi-Fi name will be displayed. Enter Wi-Fi password. Now press the Wi-Fi reset

button for 3 seconds on back of control unit. When hear the BEEP sound from control unit, click

‘Connect’ button on mobile application

After successful configuration, screen 3 will be displayed. Press ‘Finished’ and return to home page.

If connection failed, please click on screen 4 to find the reason

8| P a g e

(1) (2) (3) (4)

Zone Information for Each Sensor Type

Each sensor should be configured within zone shown in below table

Zone Number

Zone Type

Sensor Type

Sensors

N/A

Wireless Remote

Keyfob

Maximum 10 pcs

01-05

Emergency Zone

Wireless Sensors

Panic, Smoke, Gas

Leak

06-14

Perimeter Zone

Wireless Sensors

Door sensor, IR beam

15-24

Motion Zone

Wireless Sensors

PIR motion sensor

25-28

Hardwired Zone

Hardwired Sensors

9| P a g e

Configure Remote with Control Unit

Remote Screen 1 Screen 2 Screen 3 Screen 4

On Home page (screen 1), select the Wi-Fi Smart Alarm.

Click on ‘Set’ (Screen 2) and select Zone Setting (Screen 3).

Select ‘#0 Zone setting’ (Screen 4)

On Zone setting page, click on ‘Study’ button. There will be a BEEP sound from control unit. At

the same time press any button on remote 2 times. Study success message will be displayed

10 | P a g e

on mobile app

Configure PIR with Control Unit

PIR Screen 1 Screen 2 Screen 3 Screen 4

**Make sure batteries are properly installed in the PIR sensor

•On Home page (screen 1), select the WiFi Smart Alarm.

•Click on ‘Set’ (Screen 2) and select Zone Setting (Screen 3).

•Select ‘#15 Zone setting’ (Screen 4). Zone Type page will be displayed

•On ‘Zone Type’ page, click on ‘Study’ button. There will be a BEEP sound from control

unit. At the same time wave your hand over the PIR sensor 2 times, every time a light

will be shown in sensor. Study success message will be displayed on mobile app

Andere Handbücher für D10

Inhaltsverzeichnis

Andere D3D Sicherheitssystem Handbücher

D3D

D3D D10 Bedienerhandbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung