Dacor IF36BNDFSF Bedienungsanleitung
In t r o d u c t I o n Custom decorator panels cover the door trim of Dacor IF36 series refrigerators for an attractive
seamless look that flows into the overall design of the room. Fabricate the panels first, then slide
them into the door trim frames. The panels are custom designed and installed by your cabinet
maker. Installation may be accomplished using various methods. Below are three examples.
For additional installation ideas, see the 3-Door Custom Overlay Installation Guide (PN 102426).
Three Panel Method
The backing panel (1/4” [6 mm] thick) slides behind the trim frames that surround the edges of
each door. The spacer (1/8” [3 mm] thick) compensates for the thickness of the trim frame. The
decorative front panels (3/4” [19 mm] thick maximum) are designed to match the surrounding
cabinets and cover the trim frame around the edges of the door. Countersink the screws used to
assemble the panels.
WARNING: Individual door panels must not exceed the maximum weight specications.
CUSTOM OVERLAY PANEL INSTALLATION
INSTRUCTIONS
REFRIGERATOR MODELS: IF36BNDFSF, IF36INDFSF
Part No. 100504 Rev. F
Routed Raised Panel Method
Create a routed raised panel and screw or glue the front panel directly to the 1/4” thick backing
panel. Instead of using a spacer panel, route the edges of the front panel to compensate for the
trim frame thickness. For the top two doors on three door models, do not route the inner edges
because there are no trim frames in the center where the doors come together. Countersink the
screws used to assemble the panels.
Spacer Panel (1/8”)
Refrigerator Door
Front Panel (3/4” Max.)
Backing Panel (1/4”)
Trim Frame
Surrounding Door
Backing Panel (1/4”)
Refrigerator Door
Front Panel (7/8” Max.)
Routed Area
(1/4” W X 1/8” D)
Trim Frame
Surrounding Door
Single Panel Method
A single 1/4” panel design can be created using the trim
frames to frame the panel (the trim frames will be exposed). Single 1/4” Panel
Trim Frame Surrounding Door
Refrigerator Door
IF36 Panel Overlay Installation
Page 2
B
A
C
DD
D
Three Door Model Two Door Model
Pa n e l SP e c I f I c a t I o n S
Front Panels
NOTE: Modification to the dimensions above may be required to allow for
door swing and other considerations depending on the location and type
of cabinet installation.
Backing Panel
(Thickness = 1/4”)
A* 17 7/8” (45.4 cm)
B 42” (106.7 cm)
C 23 13/16” (60.5 cm)
D 36 3/16” (91.9 cm)
Spacer Panel - Routed Area
(Thickness = 1/8”)
A* 17 5/8” (44.8 cm)
B 41 1/2” (105.4 cm)
C 23 5/16” (59.2 cm)
D 35 11/16” (90.6 cm)
Front Panel
(Thickness = 3/4”)
A* 18 1/8” (46.0 cm)
B 42 3/16” (107.2 cm)
C 24” (61.0 cm)
D 36 1/2” (92.7 cm)
* On three door models there are no
trim frames on the inner edges of
each door. The inner door surfaces
must be completely finished for a
refined look (see page 3). Stated
dimensions are to the finished edge.
do o r Pa n e l We I g h t SP e c I f I c a t I o n S
Model: IF36BNDFSF
Three Doors Model: IF36INDFSF
Two Doors
Panel Maximum
Weight Specifications
1 15 lb. (7 kg)
2 30 lb. (14kg) 2
11
11
No Trim
Frame* No Trim
Frame*
WARNING:
To prevent the unit from tipping
forward and to provide a stable
installation, the refrigerator must
be secured in place with an anti-tip
device.
IF36 Panel Overlay Installation
Page 3
fI n I S h I n g t h e In n e r re f r I g e r a t o r do o r S ed g e S o n th r e e do o r Mo d e l S
French Style Refrigerator
Door Detail
Trim Frame
Screw
Top Trim Frame
Back of Door
Detail “C”
Single Panel Method
Decorative 1/4”
thick panel -
Finish exposed
edge
Front of Door
See Detail “C”
and “D”
Detail “D”
Three Panel and Routed
Raised Panel Methods
Trim Frame Screw
Top Trim Frame
Black Finished
Refrigerator
Door Surface
Back of Door
Front of Door
1/4” Backing
Panel
1/8” Spacer
or Front Panel
Inset
Decorative
Front Panel -
3/4” maximum
thickness
Fill all joints and finish
exposed edge
Black Finished
Refrigerator
Door Surface
IF36 Panel Overlay Installation
Page 4
ha n d l e dI M e n S I o n S a n d In S t a l l a t I o n
Before installing a custom panel assembly, you must install• the custom handle hardware.
Dacor recommends handles with larger D-style pulls. If using• screws with thick heads, they must be countersunk into the
panel before installing the handles.
Any handle designed for use with an appliance should• produce satisfactory results.
Mounting screw length varies with the total thickness of the• panels.
On two door models: The top handle is mounted on the left or• right side of the door depending on door swing.
IMPORTANT: Dacor advises not using single pull knobs.
20"(508mm)
20” Typical
(50.8 cm)
36” Max.
(91.4 cm)
Example of
Door Handle
Detail “C”
Side View - Handle Installation on
Top Doors on three Door Model
Detail “D”
Side View - Handle Installation on
All Other Doors
Double sided
tape between
doors and
panels
Apply two strips of double sided
thin tape between door front and
panel back on each side of door
handle
Counter Sink
Screw
Handle
Door Panel
Assembly
Door Door
Trim Frame
Surrounding Door
Door Panel
Assembly
Handle
Counter Sink
Screw
Three Door Model Two Door Model
Detail “C”
Detail “D”
Detail “D”
Detail “D”
IF36 Panel Overlay Installation
Page 5
Pa n e l In S t a l l a t I o n
NOTE: Remove the top door(s) to make panel installation
easier. On three door models secure the inner edges of the
overlays to the door where there are no trim frames using
double sided tape.
With a Phillips screwdriver, remove the trim screws from the• top trim frame on the freezer and refrigerator door(s).
Remove the trim.•
Lower the overlay panel into the trim frames on the door.•
With the panel in position, replace the top trim. Be sure that• the panel is inserted completely into the channel for proper
fit and alignment.
Two door models
Refrigerator Doors (Top)
Three door models
Left door
Freezer Door
(Bottom - both models)
Right door
IF36 Panel Overlay Installation
Page 6
no t e S
IF36 Panel Overlay Installation
Page 7
no t e S
DacorCorporation●1440BridgeGateDrive,DiamondBar,CA91765●Tel:(800)793-0093●FAX:(626)403-3130●www.Dacor.com
Specications subject to change without notice.
Dacor assumes no liability for changes to specications.
Andere Handbücher für IF36BNDFSF
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Dacor Kühlschrank Handbücher
Dacor
Dacor EF36IWF Bedienungsanleitung
Dacor
Dacor PF36BNDFAGPA Bedienungsanleitung
Dacor
Dacor IF36BNDFSF Bedienungsanleitung
Dacor
Dacor Discovery series Bedienungsanleitung
Dacor
Dacor EF36BNNF Series Bedienungsanleitung
Dacor
Dacor EF48NBSS Bedienungsanleitung
Dacor
Dacor IF42 Series Technisches Handbuch
Dacor
Dacor Distinctive DTF364SIWS Bedienungsanleitung
Dacor
Dacor EF42DBSS Bedienungsanleitung
Dacor
Dacor DRR30 Series Bedienungsanleitung
Dacor
Dacor EF36 Bedienungsanleitung
Dacor
Dacor Side-by-Side Bedienungsanleitung
Dacor
Dacor 36 Bedienungsanleitung
Dacor
Dacor DISCOVERY DYF42BNDI Bedienungsanleitung
Dacor
Dacor Epicure EF36LNDFSS Technisches Handbuch
Dacor
Dacor EF36BNF Series Bedienungsanleitung
Dacor
Dacor PF36BNDF Bedienungsanleitung
Dacor
Dacor OF24LS Bedienungsanleitung
Dacor
Dacor EF36BNF Series Bedienungsanleitung
Dacor
Dacor Discovery DYF42SBIWS Bedienungsanleitung
Beliebte Kühlschrank Handbücher anderer Marken
Bonnet Neve
Bonnet Neve SKYVIEW PLUS Bedienungsanleitung
Zanussi Electrolux
Zanussi Electrolux ZERB 8441 Bedienungsanleitung
Sharp
Sharp SJ-BA31IEXW2-EU Bedienungsanleitung
CORBERO
CORBERO CC2300MCW Bedienungsanleitung
KitchenAid
KitchenAid 2205264 Bedienungsanleitung
Stengel
Stengel KU 1101 A++ Bedienungsanleitung
