Daedalus Martin Bedienungsanleitung
Martin
Daedalus
Spinning Wheels
Welcome to the Flock!
Thank you for purchasing the most travel-friendly Daedalus
electric spinning wheel to date! It was designed to be ultra-
portable, long-lived, and to require lile to no maintenance during
its lifeme. Should you need any assistance in the future with
your wheel, please do not hesitate to contact us at support@
daedalusspinningwheels.com. To watch a video on how to assemble
your wheel, please scan the QR code below or click the link:
hps://www.youtube.com/@daedalusspinningwheels
1
Rear Bearing Guide Maiden Bearing Orice Reducer
Le Tension
Hook
Tie-os
Martin while Nested
Flyer Storage
Retenon Rear Cup Maiden Cup Tension Belt Orice Hook
Power Storage
Retenon
Storage
Snap-Ins
Lazy Kate
Axles
Drive Belt Storage
Magnets
3
Internal
Direcon
Switch Tension Dial
Internal Speed
Dial
Flyer
Retenon
Storage Spares Kit
Plug-in for
External
Speed
Controller
Internal/
External
Control
Selecon
Switch
Motor Pinion Upright
Snap-Ins
4
How to Set Up
Remove Flyer Assembly from the
boom of Marn’s Box.
Snap the Maiden Cup into Upright
Snap-In at the boom of the box.
Open up your Marn.
Remove the Maiden Cup from the
Storage Snap-In in the lid.
5
Snap the Rear Cup into Upright
Snap-In at the boom of the box.
Place the Flyer Assembly onto the
Maiden and Rear Cup.
Remove the Rear Cup from the
Storage Snap-In in the lid.
Place Drive Band over Flyer
Assembly.
6
How to Set Up (Continued)
Ensure the Drive Band is going
over the Flyer’s Whorl.
Locate the Tension Belt
magnecally aached with Orice
Hook.
Secure the Drive Band onto the
Motor’s Pinion.
Check Drive Band alignment and,
if necessary, tweak the motor’s
posion forward or back.
7
Once the Tension Belt has been
secured on both sides, take the
center of the Tension Belt and
posion it onto the Aluminum
Drum of bobbin.
Note: Spring and Cinch locaon is
based on spin direcon. Secure the
Cinch onto the Right Tension Hook
for Z direcon, reverse belt for S.
Secure the Cinch onto the Right
Tension Hook.
Secure the Spring on the Le
Tension Hook.
8
How to Pack Up
Loosen Drive Band on Flyer.
Remove the Drive Band from the
Motor’s Pinion.
Remove the Flyer Assembly from
the Maiden and Rear Cups.
Remove the Tension Belt and
secure the Spring onto the
magnets in the Lid.
The Drive Band can be le on
Flyer Assembly if the project is sll
ongoing. Otherwise, secure the
Drive Band underneath the Lazy
Kate Storage area.
Inhaltsverzeichnis
Andere Daedalus Spinnrad Handbücher
Beliebte Spinnrad Handbücher anderer Marken
Ashford
Ashford JOY 2 Bedienungsanleitung
Kromski
Kromski Polonaise Bedienungsanleitung
Schacht
Schacht WOLF PUP LT FL3006 Bedienungsanleitung
Schacht
Schacht SPINNING WHEEL WS6502 Kurzanleitung
Schacht
Schacht BABY WOLF LOOM Four Treadle Kit Bedienungsanleitung
Ashford
Ashford TDSW04072014V9 Bedienungsanleitung
