D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
4
Printed in Jan. 2001 PS-MMA0415-E1A
1.3. Engine Specifications
1.3.1. Specification
EngineModel
Items D1146 D1146TI DE08TIS
Engine type 4 cycle in-line,
Water-cooled type
Naturally aspirated
4 cycle in-line,
Water-cooled type
Turbo charged & intercooled
Combustion chamber type Direct injection type
Cylinder liner type Replaceable dry liner
Timing gear system Gear driven type
No. of piston ring Compression ring 2, oil ring 1
No. of cylinder-bore x stroke (mm) 6 – 111 ×139
Total piston displacement (cc) 8,071
Compression ratio 17.5 : 1 16.8 : 1 18.5 : 1
Engine dimension (length x width x height) (mm) 1,253x811.5x934.5 1,253x812.5x1,009 1,253x812.5x1,009
Engine weight (kg) 730 745 745
Rotating direction (viewed from flywheel) Counter clockwise
Fuel injection order 1 – 5 – 3 – 6 – 2 – 4
Fuel injection timing (B.T.D.C static) 15°9°3°
Injection pump type Zexel in-line “AD” type Zexel in-line “P” type
Governor type Mechanical governor
type(RLD)
Mechanical
governor
type(RLD-J)
Injection nozzle type Multi-hole type (5 hole) Multi-hole type
(7 hole)
Fuelinjectionpressure (kg/cm
2) 210 214 160/220
Compressionpressure (kg/cm
2) 28 (at 200 rpm)
Intake and exhaust valve clearance (at cold) (mm) 0.3
Open at 16°(B.T.D.C)
Intake valve Close at 36°(A.B.D.C)
Open at 46°(B.B.D.C)
Exhaust valve Close at 14°(A.T.D.C)
Lubrication method Full forced pressure feed type
Oil pump type Gear type driven by crankshaft
Oil filter type Paper element type Cartridge type
Lubricating oil capacity (max./min.) (lit) 15.5/12 or 20/17
Oil cooler type Water cooled
Water pump Centrifugal type driven by belt
Cooling Method Fresh water forced circulation
Cooling water capacity (engine only) (lit) 14
Thermostat type Wax pallet type
(79 ∼94 °C or 83 ∼95 °C )
Air compressor type & capacity (cc) Belt driven type, 220 or 300
Alternator voltage – capacity (V – A) 24 – 45 or 24-150
Starting Motor voltage – output (V - kW) 24 – 4.5
Air heater capacity (V – A) 22 – 95 (2.1kW)
Battery capacity (V - AH) 24 - 150
