Daewoo DPX-32X1BMB Bedienungsanleitung
Selecting Picture Mode
44
Selecting Picture Mode
• Press the [PICTURE MODE] on the
remote control.
• While pressing the [PICTURE MODE] for
the first time, the current picture mode will
be displayed.
Each Press of the Button Will Select
One of Four Picture Modes.
• Each time you press the button, a
different picture mode appears. The
sequence used is as follows:
* Normal : For a highly defined image in a normally bright
room
* Dynamic: For a clear-cut image emphasizing high contrast
for sports viewing
* Cinema: For a movie
* User: Allows the user to customise settings as desired.
Menu on the Screen will disappear.
• After selecting a desired picture mode, the
menu on the screen will be disappeared.
• If you want to customise the picture mode,
refer to the following page.
3
1
2
NOTES:
1) Normal, Dynamic, and Cinema modes are factory preset values.
2) When adjusting sub-menus while you are in Normal, Dynamic,
and Cinema modes, the Picture Mode will be automatically
converted to User Mode, and the adjustments will be made.
3) Selecting [Initialize] in the [Features], menu will allow the
Brightness, Contrast, etc. to return to the factory preset values.
Normal Dynamic
Cinema User
Selecting Picture
Mode
• Select the Picture mode
that is appropriate
depending on the kinds
of pictures, you enjoy.
45
Customising
Picture
• You can adjust the
color tone and
brightness to your
preference.
Press the CH Button.
• After selecting [Picture] by the
“CH”
buttons, press the
“ VOL ”button. Then the sub menu of [Picture] will be
displayed.
Select the User Mode.
• Select [User] by the “ VOL ”buttons in the [Mode].
3
Press the MENU Button.
• The MENU shown below will display on the screen.
1
2
Customising Picture
Move Select MENU Exit
Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp.
N.R.
Normal
Normal
On
50
50
50
50
8
Picture
Screen
Sound
Feature
Install
Move Adjust MENU Exit
Picture
Screen
Sound
Feature
Install
Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp.
N.R.
Normal
Normal
On
50
50
50
50
8
Move Adjust MENU Exit
Picture
Screen
Sound
Feature
Install
Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp.
N.R.
User
Normal
On
50
50
50
50
8
46
Select User Mode Adjustments
Picture Condition Adjustments
• Press the “ VOL ”buttons to adjust the picture of your
preference.
• N.R. functions the noise reduction.
4
5
• While you are in [Picture Mode – User], press the
“CH”
buttons to select a specific adjustment item.
NOTES:
1) While you are in the PC or HDMI input mode, you can only adjust brightness, contrast and color
temperature.
2) When you adjust Brightness, Contrast, and Color in Component mode or adjust Brightness and Contrast
in PC and HDMI mode, the picture is adjusted finely.
3) The Tint control is used when the input signal is NTSC or Component. If input signal is NTSC, Tint
control is displayed in picture menu.
4) Selecting the color temperature makes the mood : normal, warm or cool.
Move Adjust MENU Exit
Picture
Screen
Sound
Feature
Install
Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp.
N.R.
User
Normal
On
50
50
50
50
8
Move Adjust MENU Exit
Picture
Screen
Sound
Feature
Install
Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp.
N.R.
User
Normal
On
50
50
50
50
8
Press the “Color TEMP”button on
the remote control.
• Pressing the “color TEMP” button first time will
display the curent setting for color Temp.
• Each time you press the button a different color
Temp appears the sequence used is as follows.
6
Normal Warm
Cool
47
Adjusting with
Screen Size button
• You can adjust
screen size or
aspect ratio as
desired.
Press the SCREEN SIZE Button.
• The current screen size will be displayed on the screen.
• Each time you press the SCREEN SIZE button on the
remote control, a different screen size appears. The
sequence used is as follows in case of AV and TV modes :
1
14:9
LB(14:9)
LBS(14:9) LB(16:9)
16:9
4:3
NOTES:
1) Displaying a picture in a 4:3 mode for a long time may cause
phosphor of the PDP to be burned. So avoid displaying a
picture in 4:3 screen size for a long time.
2) Under Component,PC and HDMI inputs,only 16:9 and 4:3 are
available.
3) 16:9 : 16:9 picture formats
14:9 : 14:9 picture formats
4:3 : 4:3 picture formats like an analog TV
LB : Enlarges the screen as to fill the black part
above and below the picture.
LBS : Enlarges the screen, and shifts up as to see
the subtitles in case you are watching video
with subtitles.
4) If the picture shows unclear image in the 480P component
input source, try to toggle the resolution from the DTV/DVD of
the Screen Mode.
• N.B. : You cannot select screen size if the picture in
picture mode is on.
LBS(16:9)
Adjusting Screen
48
Adjusting Screen
• You can adjust the
screen in the menu.
Press the MENU Button.
• The MENU screen as shown below will appear.
Press the “ CH ” Button.
• Press the
“CH”
buttons to select ‘Screen’.
< In case of PC input >
1
2
Adjusting Screen in the MENU
Move Select MENU Exit
Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp.
N.R.
Normal
Normal
On
50
50
50
50
8
Picture
Screen
Sound
Feature
Install
MENU
Mode
H. Position
V. Position
Auto
48
49
Move Select Exit
Picture
Screen
Sound
Feature
Install
16 : 9
49
Press the Volume “ VOL ”Buttons.
• Press the Volume “ VOL ”buttons to enter the
sub menu “Screen”.
•While you are in ‘Screen’ menu, press the
“
CH
” or “
CH
”button to select a desired
item, and then, adjust the value by pressing the
“VOL” or “VOL ”.
3
NOTES:
1) Screen Mode is different according to the input modes.
input Available Screen Mode
AV/TV 16:9, 4:3, LB(16:9), LBS(16:9)
14:9, LB(14:9), LBS(14:9)
Component, 16:9, 4:3
PC,HDMI
2) Other Screen adjustments
< Under PC mode >
[H. Position] : As the value increases, the screen moves
to the right.
[V. Position] :
As the value increases, the screen moves up.
[Auto] :
Adjusting automatically the screen to optimum
states.
< Under PIP mode >
[Alpha Blend] : Adjusting the translucent rate of the sub-
picture.
Screen Mode
Function
This function is same
to the [Screen Size] of
remote controller.
Adjusting Screen in the MENU
< In case of PC input >
MENU
49
Move Adjust Exit
Picture
Screen
Sound
Feature
Install
16 : 9
Mode
H. Position
V. Position
Auto
48
Press the “STILL” Button.
• If you wish to freeze a picture, press the “STILL” button.
You can still hear the sound.
• Press “STILL” button again to cancel the “STILL” function.
1
50
Watching a
Still Image
• You can view still
images with this
function. However,
displaying the same
images such as still
images for a long
time may cause
image burn.
Watching a STILL Image
NOTES:
1) Displaying the same images such as still images for a long
time may cause image burn (after-image lagging).
2) In this case, such “image burn” may become less noticeable
if moving images are later displayed for a long time.
3) However, an image burn may become a permanent one,
damaging the Plasma Display; therefore, avoid displaying
the same images for a long time.
4) Use the function [ISM], while displaying still images for a long
period of time to minimize this effect.
ISM (on or off) is in the Feature menu.
Still
51
Engaging PIP mode
• Press the ‘PIP’ button once on the remote control to engage
the Picture-in-Picture mode.
• By pressing the button repeatedly, it will show the following
cycle.
• If switched to P-by-P (Picture-by-Picture) mode, the screen
will be split in half. The screen on the left side is the main
picture, and the sub-picture will be on the right of the screen.
Position of the Sub-picture
• When PIP mode is engaged, the sub-picture can be
displayed in one of the four corners by using
'POSITION' button.
• Also, using “ VOL ” and
“CH”
button, the sub-
picture can be moved to any position you want.
Swap the pictures
• In order to swap between the main picture and sub-picture,
press the ‘SWAP’ button.
3
1
2
Screen Adjustment
of the Sub-picture
• Alpha Blend of the
sub picture can be
adjusted on Screen
Menu of OSD
• Alpha Blend is
availible only in PIP
Mode.
Alpha Blend
The adjustment of alpha
blend allows the sub-
picture to be translucent.
The translucent rate is
controlled with
“VOL ” buttons.
Watching Two Pictures Simultaneously
<Using ‘Position’ button>
P-by-P
PIP
Main
Sub
Main Main Sub
Main
Sub
Sub
Sub
Sub
Sub
Main
Main
Main
•
PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously.
<Using “ VOL ” and
“CH”
button>
Select the Channel
• Using channel Up/Down buttons (
CH
/CH )
, you may select the desired
channels for sub-pictures.
• The CH Up/Down buttons select the
TV channels.
Available PIP Input Combinations
6
4
Select the Input Source
• Various signal sources can be displayed within
the sub-picture under PIP mode.
• Once the PIP mode is on, you may change the
input source of the sub-picture by pressing the
'SOURCE' button.
• Pressing the 'SOURCE' button repeatedly will
cycle through following order.
T V -> AV(S)1 -> AV(S)2
5
52
Watching Two Pictures Simultaneously
• Main-pictue and sub-pictue input combinations
are listed below for reference.
Selecting
Sound Mode
• Enjoy various sound
modes by selecting
your favourite Sound
Mode depending on
the kinds of moving
pictures.
Selecting Sound Mode
53
Select “SOUND MODE”.
• Press the “SOUND MODE” on the
remote control.
• While pressing the “SOUND MODE”
for the first time, the current sound
mode will be displayed.
Every Press of the Button Changes Modes.
• Each time you press the button, a
different sound mode appears.
The sequence used is as follows:
* Normal : Suitable for watching any motion picture
* Movie : Select this mode to simulate being at a movie theater
* Music : Ideal for listening to music
* News : Allows human voice to be heard more clearly
* User : Allows the user to adjust as desired.
MENU will Disappear.
• After selecting a desired Sound Mode, the
on-screen menu will disappear in about
2~3 seconds.
• Normal, Movie, Music and News modes
are factory preset values.
If you want to customise the sound modes
for your preference, refer to the following
page.
3
1
2
Normal
Music User
News
Movie
Inhaltsverzeichnis
Andere Daewoo Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
HR Matic
HR Matic HR MULTI 3 Bedienungsanleitung
Yamaha
Yamaha ACC-GNRST-30-20 Bedienungsanleitung
