2. Do not use your heater in the presence of explosive or
flammable substance.
3. It is absolutely necessary ensure the following:
-The socket is not used to the heater and other high
power electrical appliance at a time.
-The cord is rated for at least 10 AMPS.
-Tight connection between plug and socket so as to avoid
the overheating plug and malfunction.
-Unplug heaters by grasping plug and pulling it from the
socket. Never yank on cord.
-Carefully use when children, old man, disabled man
inside solely. No use when no supervision.
-Our factory, if damaged manufactures the power cord
and plug; Return the heater to the approved service
agent for changing.
-Caution: Do not drape anything on your heater when in
use.
OPERATING UNSTRUCTIONS
1. Plug into any 230~50 Hz, AC source.
2. Your heater is equipped with a 4-position rotary switch
SYMBOL FUNCTION
0 OFF
* BLOW COOLING AIR
I HALF HEAT OUTPUT
II FULL HEAT OUTPUT
3. Set the rotary switch to maximum for fast warm up of a
room. Once the room is comfortable, select a lower
setting to reduce electrical consumption and to prevent
the room from becoming too warm.
