Daewoo DWF-262PS Bedienungsanleitung
Service Manual
Auto Washer
Model: DWF-262PS /200SM/200SW
S/M No. :
Oct. 2011
✔Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
WASHING MACHINE
Contents
1. SPECIFICATIONS ............................................................................................... 2
2. STRUCTURE OF THE WASHING MACHINE............................................................... 3
3. DIRECTIONS FOR INSTALLATION AND USE............................................................. 4
INSTALLING PLACE................................................................................................... 4
HOW TO INSTALL ON AN INCLINED PLACE .................................................................... 4
HOW TO CONNECT THE INLET HOSE ........................................................................... 5
4. FEATURE AND TECHNICAL EXPLANATION.............................................................. 7
FEATURE OF THE WASHING MACHINE ......................................................................... 7
WATER CURRENT TO ADJUST THE UNBALANCED LOAD.................................................. 7
AUTOMATIC WATER SUPPLY SYSTEM FOR BLANKET WASH............................................. 7
FUNCTIONAL PRINCIPLE OF BUBBLE WASHING MACHINE................................................ 8
AUTOMATIC DRAINING TIME ADJUSTMENT................................................................... 8
AUTOMATIC UNBALANCE ADJUSTMENT....................................................................... 9
CIRCULATING-WATER COURSE AND LINT FILTER........................................................... 9
LINT FILTER........................................................................................................... 10
RESIDUAL TIME DISPLAY ......................................................................................... 10
DRAIN MOTOR....................................................................................................... 10
GEAR MECHANISM ASS’Y ........................................................................................ 11
5. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT .............................................. 12
GEAR MECHANISM ASS’Y REPLACEMENT ................................................................... 12
MOTOR DRAIN AND VALVE REPLACEMENT ................................................................. 14
6. THE REPAIR METHOD OF GEAR MECHANISM FOR CLUTCH SPRING PROBLEM............ 15
THE STRUCTURE OF GEAR MECHANISM............................................................................................... 15
HOW TO CHECK THE CLUTCH SPRING PROBLEM............................................................................... 16
THE PROCESS OF DISASSEMBLING........................................................................................................ 17
THE PROCESS OF ASSEMBLING .............................................................................................................. 19
7. TROUBLE SHOOTING GUIDE............................................................................... 21
CONCERNING WATER SUPPLY..................................................................................................................21
CONCERNING WASHING............................................................................................................................. 22
CONCERNING DRAINING............................................................................................................................ 23
CONCERNING SPINNING ............................................................................................................................ 24
CONCERNING OPERATING ........................................................................................................................ 25
8. PRESENTATION OF THE P.C.B ASS’Y .................................................................... 26
9. APPENDIX
WIRING DIAGRAM......................................................................................................................................... 27
PARTS DIAGRAM .......................................................................................................................................... 28
PARTS LIST .................................................................................................................................................... 32
SEQUENCE CHART...................................................................................................................................... 35
1. SPECIFICATIONS
SPECIFICATIONS
2
1POWER SOURCE A.C 110V/60Hz , A.C 220V/50Hz , A.C 220V/60Hz
2POWER CONSUMPTION 550W
3WEIGHT 45kg(MOLD) / 49kg(GLASS)
4DIMENSION (WxHxD) 630 x 1004 x 670 mm
5WASHING COURSE FULL AUTOMATIC 6 COURSES
(FUZZY, BLANKET, ECONOMY, BABY CARE, SPORTS WEAR, DELICATE)
6WATER CONSUMPTION 210ℓ
HIGH 100ℓ
7WATER LEVEL MED 90ℓ
SELECTOR LOW 75ℓ
SMALL 65ℓ
8OPERATING WATER PRESSURE 0.03MPa ~ 0.8MPa
(0.3kgf/cm2~ 8kgf/cm2= 2.94N/cm2~ 78.4N/cm2)
9REVOLUTION WASH 130~150 rpm(60Hz) / 125~140 rpm(50Hz)
PER MINUTE SPIN 710~740 rpm(60Hz) / 640~675 rpm(50Hz)
10 PULSATOR TORNADO PULSATOR
11 WATER LEVEL CONTROL ELECTRONIC SENSING
12 AUTOMATIC WATER SUPPLY O
13 GEAR MECHANISM ASS'Y HELICAL GEAR
14 LINT FILTER 1~2 (OPTION)
15 AUTOMATIC SOFTENER INPUT O
16 FUNCTION FOR TIME DELAY O (OPTION)
(RESERVATION)
17 DISPLAY OF RESIDUAL TIME O
18 FUNCTION FOR BUBBLE O (OPTION)
19 DRAIN TYPE PUMP & NON PUMP
20 AUTOMATIC POWER OFF O
21 DOOR TYPE (TRANSPARENT)
No. ITEM DWF-200SL DWF-200SM DWF-200SW
In case of moving Washing Machine, please
follow the following picture.
NOTES
PLASTIC DOOR
(TRANSPARENT,OPAQUE) GLASS DOOR(TRANSPARENT)
2. STRUCTURE OF THE WASHING MACHINE
STRUCTURE OF THE WASHING MACHINE
3
■■
ACCESSORIES (FULL OPTION)
The parts and features of your washer are illustrated on this page.
Become familiar with all parts and features before using your washer.
NOTE
• The drawings in this book may vary from your washer model.
They are designed to show the different features of all models covered by this book. Your model may not
include all features.
• HOT WATER TAP
After using the washer, close the water tap.
In case of the single valve model, there is
no hot water valve.
• COLD WATER TAP
After using the washer,
close the water tap.
• BLEACH INLET
• LINT FILTER
• CASE DETERGENT
AND SOFTENER
• GROUND WIRE
In case of 3-wire power cord,
ground wire will not be provided.
• POWER CORD
• CONTROL PANEL
• POWER SWITCH
• PULSATOR
• ADJUSTABLE LEG
Water supply hoses
(two) Drain hose Water hose fixer (two) User manual
3. DIRECTIONS FOR INSTALLATION AND USE
DIRECTIONS FOR INSTALLATION AND USE
4
●The place where it would be exposed to
direct sunlight.
●The place nearby a heater or heat appli-
ance.
●The place where it would be supposed
to be frozen in winter.
●The kitchen with coal gas and a damp
place like a bathroom.
10Cm
Install the washer on a horizontal
solid floor. If the washer is installed
on an unsuitable floor, it could make
considerable noise and vibration.
■■
INSTALLING PLACE
Never install in these places
Keep the machine body
more than 25cm apart from
the wall surface. It will
make easy cleaning the
drain filter which is equipped
at the back side of it. And if
it comes into contract vibra-
tion may occur.
25cm
The openings must not
be obstructed by carpet-
ing when the washing
machine is installed on a
carpeted floor.
■■How To Install On An Inclined Place
NOTES
2Check the Horizon
Status
Check the position of tub above
the center of the washer.
1Horizon
Setting
After controlling the height
by turning the adjustable
leg, let the washer put
down to the ground.
DIRECTIONS FOR INSTALLATION AND USE
5
FOR ORDINARY TAP
6Connect the inlet hose adapter
to the water inlet of the washer
by turning it clockwise to be
fixed tightly.
• Please check the rubber packing
inside the inlet hose adapter.
1Pull down the collar
of the inlet hose to
separate it from the
water tap adapter. 2Loosen the four
screws at the water
tap adapter, but don’t
loosen the screws until
they are separated from
the water tap adapter.
4Remove the tape,
and screw connector
B into connector A
tightly. 5Connect the inlet
hose to the water tap
adapter by pulling down
the collar of the hose end.
3Connect the water tap
adapter to the water tap and
tighten the four screws evenly
with pushing up the adapter
so that the rubber packing
can stick to the water tap
tightly.
■■How to Connect the Inlet Hose
Be careful not to mistake in supplying between the hot(maximum : 50˚C) and cold water.
In using only one water tap or in case of attached one water inlet valve, connect the inlet hose to the cold water inlet
valve.
Do not over tighten : This could cause damage to couplings.
FOR SCREW-SHAPED TAP 3Insert the inlet hose adapter
into the water inlet of a washer
and turn it to be fixed.
• Check the packing in the inlet.
1Connect the inlet
hose to the water tap
by screwing the con-
nector D tightly. 2Connect the connec-
tor-inlet supplied if
necessary.
Inlet Hose
Connector D Rubber
Packing
Connector C
Connector
Inlet
Rubber
Packing
Connector D
Connector C
Hose
TAPE
Connector B
Connector A
DIRECTIONS FOR INSTALLATION AND USE
6
CLEANING THE LINT FILTER
• This washer has two Lint Filters in the top TUB in order to filter off lint and fuzz.
CLEANING THE WATER INLET FILTER
• Clean the filter when water leaks from the water inlet.
3Return the filter as it was, and
insert the filter frame into the
slot.
1Pull the Filter frame
upward. 2Turn the lint filter
inside out, wash to
the lint off with water.
1Pull the power plug out
before cleaning it. 2Turn off the water sup-
ply to the washer and
separate the inlet hose.
3Pull the inlet filter out. 4Remove the dirt from
the inlet filter with a
brush.
CLEANING THE DRAIN FILTER
• In case “Pump-Model” drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons, etc.
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused.
1Put down the remained water in
the hose. And put a container
under the filter to collect water.
2Turn the cap counter clockwise. 3Pull out the filter assembly off
the case.
4Clean the drain filter removing
the foreign stuffs. 5Put the filter into the case. And
turn the cap to adjust the promi-
nence of the filter to the hole of
the case.
6Turn the cap clockwise tightly.
Lint Filter Filter Frame
FILTER
FILTER
CAP
CAP
CASE
CONTAINER
FILTER
CAP
CAP
CAP
CASE
STOPPER
STOPPER
4. FEATURE AND TECHNICAL EXPLANATION
FEATURE AND TECHNICAL EXPLANATION
7
WASH DRAIN SPIN FILL RINSE 1 DRAIN SPIN FILL RINSE 2 DRAIN •••
MOTOR C.W
SIGNAL C.C.W
TIME(SEC.) 0.3 0.3 0.3 0.3 0.3 0.3 •••••••
35 SEC. (About 29 Times)
Feature of the Washing Machine
1 First applying the Radical Technology in the world ... go beyond washing, sterilize your clothes and deodorize a
bad smell(Option).
2 The first air bubble washing system in the world.
3 Quiet washing through the innovational low-noise design.
4 Improving washing performance by more than 35%, while reducing power consumption by 40%.
5 The laundry detergent dissolves well in water because of the air bubble washing system.
6 The adoption of the water currents to adjust the unbalanced load.
7 One-touch operation system.
Water Current to Adjust the Unbalanced Load
It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 35
seconds.(But, the DELICATE course have no operation of the water currents to adjust the unbalanced load.)
EFFECT
It reduces vibration and noise effectively while spinning.
WATER FLOW
Automatic Water Supply System for Blanket Wash
The water level would be lowered because the blanket absorbs water at the beginning of washing. Therefore, after
2 minutes, the operation is interrupted to check the water level, and then the water is supplied again until the select-
ed water level is reached.
FEATURE AND TECHNICAL EXPLANATION
8
FUNCTIONAL PRINCIPLE
1. The micom can remember the time(D) from the begining of drain to reset point when the pressure switch reaches
to “OFF” point
2. In case of continuous draining, residual drain time is determined by micom.
Draining time as a whole = D + 90 Residual drain time.
The time remembered by micom.
FUNCTIONAL PRINCIPLE
Bubble Motor supplies the air from the bottom of outer tub to the inner space of pulsator, the air is dispersed by the
rotation of pulsator. Air-bubble is created by the centrifugal force, and rises up.
Draining Good draining The washer begins spin process after drainage.
condition Bad draining Draining time is prolonged.
No draining Program is stopped and gives the alarm.
Drain Time Movement of the Program
Less than Continue draining.
15 minutes
More than Program stops and gives the alarm with blinked on display lamp.
15 minutes
Functional Principle of Bubble Washing Machine
ACROSS SECTION
Automatic Drainning time Adjustment
This system adjusts the draining time automatically according to the draining condition.
Air bubble
Tub
Outer tub
Pulsator
FEATURE AND TECHNICAL EXPLANATION
9
Contact of safety switch
Lid closing
Lid opening
Contact lever A
Normal (ON)
Position of
unbalanced load (OFF)
Automatic Unbalance Adjustment
Circulating-Water Course and Lint Filter
The alarm finished when you close the lid after opening
it. Check the unbalance of the wash load and the instal-
lation condition.
NOTES
Filter Tub
Outer tub
Water
channel
Pulsator
This system is to prevent abnormal vibration during intermittent spin and spin process.
FUNCTIONAL PRINCIPLE
1. When the lid is closed, the contact lever A of
the safety switch is “ON” position.
2. In case that wash loads get uneven during
spin, the outer tub hits the safety switch due
to the serious vibration, and the spin pro-
cess is interrupted.
3. In case that P.C.B. ASS’Y gets “OFF” signal
from the safety switch, spin process is
stopped and rinse process is started auto-
matically.
4. If the safety switch is operated due to the
unbalance of the tub, the program is
stopped and the alarm is given.
CIRCULATING-WATER
The washing and rinsing effects have been
improved by adopting the water system in
which water in the tub is circulated in a
designed pattern.
When the pulsator rotates during the washing
or rinsing process, the water below the pul-
sator fans creates a water currents as shown
in figure.
The water is then discharged from the upper
part of the tub through the water channel.
About 40 L/min. water is circulated at the ‘high’
water level, standard wash load and standard
water currents.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Daewoo Waschmaschine Handbücher
