Dahle 20404 Bedienungsanleitung
20400 SERIES
INTERMEDIATE OFFICE SHREDDERS
20404
20414
20422
20430
20434
20500 SERIES
ECONOMY OFFICE SHREDDERS
20506
20514
OPERATION MANUAL
20404.90.0830 - 09/2007
2
Congratulations on your purchase of a DAHLE 400 / 500 Series ffice Shredder!
We here at DAHLE North America are dedicated to providing rugged and
dependable products for the large, and not so large office. We are sure your new
DAHLE 400 / 500 Series ffice Shredder will meet or exceed your expectations of
quality and service.
If you have any questions regarding your new DAHLE paper shredder, call your
sales representative, or call DAHLE Customer Service, toll free, at (800)
995-1379 between 8:30 am and 5:00 pm Monday through Friday, EST.
Check off the model and record the serial number for your records in the space
provided below.
Serial Number:________________________
DIAGRAM KEY
1. Feed pening
2. Light Barrier
3. N/ FF/Reverse
4. Warning LED indicator (Bag full, Door ajar)
5. Power Light
6. Transport Bolts
7. Waste Bin
8. Shred Bag
9. Door Pull
10. Door
20404 20414 20430 20434 20506 20514
READ ALL INSTRUCTI NS BEF RE PERATING Y UR SHREDDER
3
ALWAYS TURN SHREDDER FF IF IT WILL BE UNATTENDED F R L NG PERI DS F TIME
SAFETY INSTRUCTIONS
Read the operating instructions carefully proir to starting up the unit!
Do not use in the vicinity of flammable liquids or gases.
Do not use in the vicinity of corrosive materials.
Do not expose to the wet.
Do not let children operate this office equipment.
Do not reach into the cutting mechanism during operation.
Do not use the shredder over a period of more than 5 minutes in no-load
operation (operation without paper).
Keep long hair clear of machine.
Keep neck-ties clear of machine.
Keep bracelets clear of machine.
Power supply must be accessible all the times.
Disconnect power supply before servicing.
The safety devices must not be manipulated with or removed.
Please make sure that the shredder gets sufficient ventilation (ventilating
flaps must kept free).
Product is not intended for use by children.
ON / OFF TIME: 20434: 10 MIN ON / 20 MIN OFF
20506: 5 MIN ON / 20 MIN OFF
20514: 5 MIN ON / 20 MIN OFF
BEFORE YOU SHRED
Remove Transport Bolts (6) with wrench provided.
Read all instructions carefully.
Record the Model and Serial Number in the space provided inside the front
cover.
Be sure the electrical outlet provides the proper power for your shredder
(see rating label on rear of shredder).
Install Shred Bag (see: “CHANGING THE SHRED BAG”).
TURNING ON YOUR SHREDDER
1. N, FF and REVERSE are controlled by the black
Rocker Switch (3) on the top of the shredder.
2. Moving the switch to the “I” ( N) position
places the shredder in the standby mode.
Note: Shredder will run momentarily.
3. Moving the switch to the center or “ ” ( FF)
position turns the shredder off.
4. The REVERSE position “R” will be discussed
in “CLEARING A PAPER JAM”.
SHREDDING
Turn shredder on. Insert paper squarely into
Feed pening (1). A light barrier (2) will auto-
matically activate the shredding mechanism.
Continue feeding paper into the Feed pening
until the shredding mechanism begins to
draw the paper in. At this point, allow the paper
to feed into the shredder on its own. nce the
paper has passed completely through the shredding mechanism, the electronic
controls will automatically stop the machine.
Microfiche and transparencies can also be shredded in the same manner as
paper, however, you should shred a piece of paper after every 8 or 10 sheets of
plastic. This helps clean plastic particles out of the shredding mechanism.
4
ALWAYS TURN SHREDDER FF IF IT WILL BE UNATTENDED F R L NG PERI DS F TIME
5
CAPACITY
Capacity is the number of sheets of 8•” x 11” paper that can be shredded at
one time. These figures are approximate and machines may vary slightly due to
various conditions. It is not recommended that you try to run your shredder at
various conditions. It is not recommended that you try to run your shredder at
Mode 20 Lb. Bond 16 Lb. Bond
20404 16 20
20414 12 15
20422 8 8
20430 5 6
20434 4 6
20506 25 30
20514 12 15
CLEARING A PAPET JAM
If too many sheets of paper are fed into your shredder at one time, it may cause
a paper jam. Running your shredder at maximum capacity increases the
chance of a paper jam. If a paper jam occurs, it is easy to clear by following
these simple steps:
1. Turn shredder off using N/ FF/REVERSE switch (3)
2. Firmly pull on paper sticking out of Feed pening while holding
N/ FF/REVERSE switch in the REVERSE (R) position.
3. After paper has been removed from the Feed pening, move
the N/ FF/REVERSE switch back to the N (I) position.
4. Separate some of the sheets and continue shredding.
6
CHANGING THE SHRED BAG
When the Shred Bag (8) is full, the shredder will automatically shut down. The
electronics will cause the amber Warning LED Indicator to light. Changing the
Shred Bag is quick and easy if you follow these simple directions.
1. Turn shredder off
2. pen Door (10) using Door Pull (9) to expose Waste Bin (7) and
Shred Bag (8).
3. Pull the Waste Bin and full Shred Bag out of the shredder.
4. Dispose of full Shred Bag.
5. Install new Shred Bag in Waste Bin, draping end of Shred Bag over edge of
Waste Bin.
6. Push Waste Bin, with new Shred Bag installed, back into shredder.
7. Close Door.
8. Turn on shredder and continue shredding.
CARING FOR YOUR SHREDDER
Clean covers with a clean dry cloth. Do not use water or solvents. Make sure you
disconnect your shredder from its power source before cleaning.
Paper shredders, like all mechanical equipment, need proper maintenance to
ensure efficient operation. Periodic lubrication of the cutting blades is important to
offset the friction generated within the cutting head. Frequency of lubrication will
vary depending on the shred size and the amount of usage. A strip-cut shredder
receiving light use (1 – 2 hours per week) will require lubrication only
once or twice a month, while the same machine used 1 – 2 hours per day will
require lubrication weekly. A cross-cut shredder should be lubricated every 1/2
hour of shredding time to maintain maximum capacity and efficiency.
The procedure for lubricating your shredder is simple, and can be performed by
any operator. The oil is packaged in a squeeze bottle and is applied directly to the
cutting blades through the feed opening (3). Run a fine stream of lubricant
from one side of the feed opening to the other. Run the shredder in REVERSE for
a few seconds to help distribute the lubricant evenly. You can now continue
shredding as usual.
DAHLE Shredder il is the only lubricant you should use in your paper shredder.
It has been specially formulated so as not to leave any residue that could attract
dust and clog the shredding mechanism. You can order DAHLE Shredder il
(item # 740) from your local dealer.
Repairs on your paper shredder should only be performed by qualified
technicians. If you need service, contact your local dealer, or you can contact
DAHLE North America Customer Service between 8:30 am and 5:00 pm EST at
(800) 995-1379.
N TE: SHREDDER WILL N T PERATE UNLESS D R IS C MPLETELY CL SED
7
IF ANY THER PR BLEMS CCUR. CALL Y UR AUTH RIZED DAHLE SERVICE DEALER
BEFORE YOU CALL FOR SERVICE
SYMPTOM POSSIBLE CAUSES SOLUTION
No Power 1. N/ FF Switch set to Move Switch to “I” (on)
wrong position position.
2. Unit unplugged Connect to outlet
3. utlet dead Reset circuit breaker
4. Door not fully closed Close Door
5. Shred Bag full Change Shred Bag
Low capacity 6. Cutting blades dry Lubricate cutting blades
according to instruction.
DAHLE SHREDDER SUPPLIES AND ACCESSORIES
Shred Bags (100 per box)
Item No. Mode s
701 Personal & 20300 Series
704 20400, 20500 & 20600 Series
705 20800 Series
706 High Capacity Models
Waste Bin
739 2039X Series
Shredder Oi (All Models)
740 Box of 4 16oz. Bottles
740G Box of 4 1gal Bottles
Automatic Oi ing System
SA -120 4 Liter Auto iler
Dah e North America, Inc.
49 Vose Farm Road
Peterborough, New Hampshire 03458
Tel: (603) 924-0003 • Fax: (603) 924-1616
Email: [email protected]
www.dahle.com
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere Dahle Aktenvernichter Handbücher
Dahle
Dahle ShredMATIC 90 Bedienungsanleitung
Dahle
Dahle 20040 automatic Bedienungsanleitung
Dahle
Dahle PaperSAFE 22312 Kurzanleitung
Dahle
Dahle 30104 Bedienungsanleitung
Dahle
Dahle 828 HD Bedienungsanleitung
Dahle
Dahle 110 Bedienungsanleitung
Dahle
Dahle 40334 Technisches Handbuch
Dahle
Dahle Dahle 30304 Bedienungsanleitung
Dahle
Dahle 20390 Bedienungsanleitung
Dahle
Dahle 20404 Bedienungsanleitung
Dahle
Dahle DAHLE 20452 Bedienungsanleitung
Dahle
Dahle Dahle 20801 S Bedienungsanleitung
Dahle
Dahle Dahle 20304 ES Bedienungsanleitung
Dahle
Dahle 808 MS Bedienungsanleitung
Dahle
Dahle DAHLE 20452 Bedienungsanleitung
Dahle
Dahle Dahle 20304 ES Bedienungsanleitung
Dahle
Dahle 41204 Bedienungsanleitung
Dahle
Dahle 31204 Bedienungsanleitung
Dahle
Dahle 35314 Bedienungsanleitung
Dahle
Dahle paperSAFE 22022 Bedienungsanleitung
Beliebte Aktenvernichter Handbücher anderer Marken
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung
GBC
GBC ShredMaster CC055 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
Rexel
Rexel Optimum AutoFeed+ 45X Bedienungsanleitung
Martin Yale
Martin Yale 227284S1 Bedienungsanleitung
