Dahua TS20A0 Bedienungsanleitung

Dahua Video ConferencingEndpoint Quick Start Guide

Dahua Video Conferencing Endpoint Quick Start Guide

Version 1.0.0

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Dahua Video ConferencingEndpoint Quick Start Guide

Legal Statement

Any or full contents of the user’s manual cannot be copied, transmitted, distributed or stored, partially or

wholly, by any means, without the prior written notice of ZHEJIANG DAHUA VISION TECHNOLOGY

CO.,LTD. (hereinafter “Dahua”).

Dahua or the third party may reserve the right of the product described in this user’s manual. Without

the prior written approval of the corresponding party, any person cannot copy, distribute, amend,

abstract, reverse compile, disassemble, decode, reverse engineering, rent, transfer or sub-license the

software.

Trademark

, , and are the trademarks or registered trademarks of

the Dahua in various jurisdictions.

HDMI logo, HDMI and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC. This product has been authorized by HDMI Licensing LLC to use HDMI

technology.

VGA is the trademark of IBM.

Windows logo and Windows are trademarks or registered trademarks of Microsoft.

Other trademarks and company names mentioned are the properties of their respective owners

About this Document

This document is for reference only. Please refer to the actual product for more details.

This document serves as a reference for multiple types of products, whose specific operations won’t be

enumerated. Please operate according to actual products.

The user shall undertake any losses resulting from violation of guidance in the document.

In case that PDF document cannot be opened, please upgrade the reading tool to the latest version or

use other mainstream reading tools.

This company reserves rights to revise any information in the document anytime; and the revised

contents will be added to the new version without prior announcement. Some functions of the products

may be slightly different before and after revision.

The document may include technically inaccurate contents, inconsistencies with product functions and

operations, or misprint. Final explanations of the company shall prevail.

Dahua Video ConferencingEndpoint Quick Start Guide

Cybersecurity Recommendations

Mandatory actions to be taken towards cybersecurity

1. Change Passwords and Use Strong Passwords:

The number one reason systems get “hacked” is due to having weak or default passwords. It is

recommended to change default passwords immediately and choose a strong password whenever

possible. A strong password should be made up of at least 8 characters and a combination of special

characters, numbers, and upper and lower case letters.

2. Update Firmware

As is standard procedure in the tech-industry, we recommend keeping NVR, DVR, and IP camera

firmware up-to-date to ensure the system is current with the latest security patches and fixes.

“Nice to have” recommendations to improve your network security

1. Change Passwords Regularly

Regularly change the credentials to your devices to help ensure that only authorized users are able to

access the system.

2. Change Default HTTP and TCP Ports:

●Change default HTTP and TCP ports for systems. These are the two ports used to communicate and

to view video feeds remotely.

●These ports can be changed to any set of numbers between 1025-65535. Avoiding the default ports

reduces the risk of outsiders being able to guess which ports you are using.

3. Enable HTTPS/SSL:

Set up an SSL Certificate to enable HTTPS. This will encrypt all communication between your devices

and recorder.

4. Enable IP Filter:

Enabling your IP filter will prevent everyone, except those with specified IP addresses, from accessing

the system.

5. Change ONVIF Password:

On older IP Camera firmware, the ONVIF password does not change when you change the system’s

credentials. You will need to either update the camera’s firmware to the latest revision or manually

change the ONVIF password.

6. Forward Only Ports You Need:

●Only forward the HTTP and TCP ports that you need to use. Do not forward a huge range of numbers

to the device. Do not DMZ the device's IP address.

Dahua Video ConferencingEndpoint Quick Start Guide

iii

●You do not need to forward any ports for individual cameras if they are all connected to a recorder on

site; just the NVR is needed.

7. Disable Auto-Login on SmartPSS:

Those using SmartPSS to view their system and on a computer that is used by multiple people should

disable auto-login. This adds a layer of security to prevent users without the appropriate credentials

from accessing the system.

8. Use a Different Username and Password for SmartPSS:

In the event that your social media, bank, email, etc. account is compromised, you would not want

someone collecting those passwords and trying them out on your video surveillance system. Using a

different username and password for your security system will make it more difficult for someone to

guess their way into your system.

9. Limit Features of Guest Accounts:

If your system is set up for multiple users, ensure that each user only has rights to features and

functions they need to use to perform their job.

10. UPnP:

●UPnP will automatically try to forward ports in your router or modem. Normally this would be a good

thing. However, if your system automatically forwards the ports and you leave the credentials defaulted,

you may end up with unwanted visitors.

●If you manually forwarded the HTTP and TCP ports in your router/modem, this feature should be

turned off regardless. Disabling UPnP is recommended when the function is not used in real

applications.

11. SNMP:

Disable SNMP if you are not using it. If you are using SNMP, you should do so only temporarily, for

tracing and testing purposes only.

12. Multicast:

Multicast is used to share video streams between two recorders. Currently there are no known issues

involving Multicast, but if you are not using this feature, deactivation can enhance your network security.

13. Check the Log:

If you suspect that someone has gained unauthorized access to your system, you can check the

system log. The system log will show you which IP addresses were used to login to your system and

what was accessed.

14. Physically Lock Down the Device:

Ideally, you want to prevent any unauthorized physical access to your system. The best way to achieve

this is to install the recorder in a lockbox, locking server rack, or in a room that is behind a lock and key.

Dahua Video ConferencingEndpoint Quick Start Guide

15. Connect IP Cameras to the PoE Ports on the Back of an NVR:

Cameras connected to the PoE ports on the back of an NVR are isolated from the outside world and

cannot be accessed directly.

16. Isolate NVR and IP Camera Network

The network your NVR and IP camera resides on should not be the same network as your public

computer network. This will prevent any visitors or unwanted guests from getting access to the same

network the security system needs in order to function properly.

Dahua Video ConferencingEndpoint Quick Start Guide

Welcome

Thank you for purchasing our video conferencing endpoint!

This quick start guide is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Attention

Please modify the user’s default password after the device operates in case of being stolen.

Please do not keep or install the device in a place with direct sunlight or near heat-producing

equipment.

Please do not install the device in a place which is wet, dusty or with soot.

Please ensure horizontal installation for the device or it is installed in a stable place, and pay

attention not to make the product fall.

Please do not allow liquid dripping or splashing onto the device and make sure no object filled with

liquid is placed on the device, which is to avoid the liquid flowing into the device.

Please install the device in a place with sound ventilation, and do not block the ventilation opening

of the device.

Please use the device only within the rated input output range.

Please do not dismantle the device unprofessionally.

2．Warning

All installation and operation here should use your locally recommended wire module (power cable),

and make sure it is applied within the fixed standard.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the rated

voltage power supply of Limited power source according to the IEC60950-1. The exact power

supply requirement is subject to the device label.

Please make disconnecting device conveniently operable if using power plug or appliance coupler

as disconnecting device.

3. Statement

Please refer to the actual product for more details; the manual is just for reference.

The manual will be regularly upgraded according to the productupdate; the upgraded content will

be added in the manual without prior announcement.

The company is not liable for any loss caused by the operation which is not followed by the manual.

There may be deviation between the actual value of some data and the value provided in the

manual due to the reasons such as the real environment is not stable and so on. Please refer to

the company’s final explanation if there is any doubt or dispute.

Other trademarks or company names may be mentioned in this manual, which belong to their

respective owners.

Dahua Video ConferencingEndpoint Quick Start Guide

4. FCC Statement

This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions and the

antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20 cm

from all persons and must not be co-located or operating in conjunction with any other antenna or

transmitter. End-users and installers must be provide with antenna installation instructions and

transmitter operating conditions for satisfying RF exposure compliance.

Dahua Video ConferencingEndpoint Quick Start Guide

vii

Table of Contents

1Product Overview .......................................................................................................................1

1.1 Brief Introduction ..........................................................................................................1

1.2 Features.........................................................................................................................1

1.3 Product Structure..........................................................................................................1

1.3.1 Structure Figure of Video Conferencing Endpoint ...........................................1

1.3.2 Remote Control......................................................................................................2

2Product Networking....................................................................................................................6

3Product Installation.....................................................................................................................7

3.1 Packing List ...................................................................................................................7

3.2 Video Conferencing Endpoint Installation ................................................................8

3.2.1 Hang Mount............................................................................................................8

3.2.2 Wall Mount..............................................................................................................8

4Initial Configuration ..................................................................................................................10

4.1 Starting Up...................................................................................................................10

4.2 Power Off.....................................................................................................................10

4.3 Remote Control Button Instruction ..........................................................................10

4.4 Main Interface Introduction .......................................................................................11

4.5 Network Config ...........................................................................................................11

4.6 Meeting Config............................................................................................................12

4.6.1 Add Device...........................................................................................................12

4.6.2 Service Config......................................................................................................15

5Meeting ......................................................................................................................................17

5.1 Hold Meeting ...............................................................................................................17

Dahua Video ConferencingEndpoint Quick Start Guide

viii

5.1.1 Create Meeting....................................................................................................17

5.1.2 Join Meeting.........................................................................................................18

5.2 Meeting Control ..........................................................................................................19

5.2.1 Chairman Meeting Site.......................................................................................19

5.2.2 Non-chairman Meeting Site...............................................................................20

6Voice...........................................................................................................................................22

7Appendix ⅠTechnical Parameters..........................................................................................24

Dahua Video ConferencingEndpoint Quick Start Guide

1Product Overview

1.1 Brief Introduction

TS20A0 is a type of integrated video conferencing endpoint with small size which is presented by

Dahua; it integrates HD digital camera, stereo microphone and speaker. The operation is so

convenient that it only needs to connect the device to power and network to realize video

communication; the device can be operated and controlled via remote control, keyboard, mouse

and etc., which is quite suitable for video conferencing in the enterprise, government and crossed

region; besides, it is fit for home users as well.

1.2 Features

Apart from being portable and convenient installation, the device also owns the following features:

Supports mouse and keyboard operation, quick configuration.

Built-in Wi-Fi module, support wireless network connection.

Supports data sharing.

Integrates built-in MIC and speaker.

1.3 Product Structure

1.3.1 Structure Figure of Video Conferencing Endpoint

Please refer to Figure 1-1 and Figure 1-2for the structure of both front panel and rear panel

respectively.

Figure 1-1

Inhaltsverzeichnis

Andere Dahua Konferenzsystem Handbücher

Dahua

Dahua TS51A0 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung