Dahua VTO2202F Bedienungsanleitung

VTO2202F

(Version 1.0)

Quick Start Guide

V1.0.1

Cybersecurity Recommendations I

Cybersecurity Recommendations

Mandatory actions to be taken towards cybersecurity

1. Change Passwords and Use Strong Passwords:

The number one reason systems get “hacked” is due to having weak or default passwords. It is

recommended to change default passwords immediately and choose a strong password

whenever possible. A strong password should be made up of at least 8 characters and a

combination of special characters, numbers, and upper and lower case letters.

2. Update Firmware

As is standard procedure in the tech-industry, we recommend keeping NVR, DVR, and IP

camera firmware up-to-date to ensure the system is current with the latest security patches and

fixes.

“Nice to have” recommendations to improve your network security

1. Change Passwords Regularly

Regularly change the credentials to your devices to help ensure that only authorized users are

able to access the system.

2. Change Default HTTP and TCP Ports:

● Change default HTTP and TCP ports for systems. These are the two ports used to

communicate and to view video feeds remotely.

● These ports can be changed to any set of numbers between 1025-65535. Avoiding the

default ports reduces the risk of outsiders being able to guess which ports you are using.

3. Enable HTTPS/SSL:

Set up an SSL Certificate to enable HTTPS. This will encrypt all communication between your

devices and recorder.

4. Enable IP Filter:

Enabling your IP filter will prevent everyone, except those with specified IP addresses, from

accessing the system.

5. Change ONVIF Password:

On older IP Camera firmware, the ONVIF password does not change when you change the

system’s credentials. You will need to either update the camera’s firmware to the latest revision

or manually change the ONVIF password.

6. Forward Only Ports You Need:

Cybersecurity Recommendations II

● Only forward the HTTP and TCP ports that you need to use. Do not forward a huge range of

numbers to the device. Do not DMZ the device's IP address.

● You do not need to forward any ports for individual cameras if they are all connected to a

recorder on site; just the NVR is needed.

7. Limit Features of Guest Accounts:

If your system is set up for multiple users, ensure that each user only has rights to features and

functions they need to use to perform their job.

8. UPnP:

● UPnP will automatically try to forward ports in your router or modem. Normally this would be a

good thing. However, if your system automatically forwards the ports and you leave the

credentials defaulted, you may end up with unwanted visitors.

● If you manually forwarded the HTTP and TCP ports in your router/modem, this feature should

be turned off regardless. Disabling UPnP is recommended when the function is not used in real

applications.

9. SNMP:

Disable SNMP if you are not using it. If you are using SNMP, you should do so only temporarily,

for tracing and testing purposes only.

10. Multicast:

Multicast is used to share video streams between two recorders. Currently there are no known

issues involving Multicast, but if you are not using this feature, deactivation can enhance your

network security.

11. Check the Log:

If you suspect that someone has gained unauthorized access to your system, you can check

the system log. The system log will show you which IP addresses were used to login to your

system and what was accessed.

12. Physically Lock Down the Device:

Ideally, you want to prevent any unauthorized physical access to your system. The best way to

achieve this is to install the recorder in a lockbox, locking server rack, or in a room that is

behind a lock and key.

13. Connect IP Cameras to the PoE Ports on the Back of an NVR:

Cameras connected to the PoE ports on the back of an NVR are isolated from the outside world

and cannot be accessed directly.

14. Isolate NVR and IP Camera Network

The network your NVR and IP camera resides on should not be the same network as your

public computer network. This will prevent any visitors or unwanted guests from getting access

to the same network the security system needs in order to function properly.

Foreword III

Foreword

General

This Guide introduces the structure, mounting process, and basic configuration of the device.

Safety Instructions

The following categorized signal words with defined meaning might appear in the Guide.

Signal Words

Meaning

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

NOTE

Provides additional information as the emphasis and supplement

to the text.

Revision History

No.

Version

Revision Content

Release Date

V1.0.0

First release

April 2019

V1.0.1

Added waterproof operation in installation

November 2019

About the Guide

The Guide is for reference only. If there is inconsistency between the Guide and the actual

product, the actual product shall prevail.

We are not liable for any loss caused by the operations that do not comply with the Guide.

The Guide would be updated according to the latest laws and regulations of related

regions. For detailed information, see the paper manual, CD-ROM, QR code or our official

website. If there is inconsistency between paper manual and the electronic version, the

electronic version shall prevail.

All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the Guide. Please

contact the customer service for the latest program and supplementary documentation.

There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our final explanation.

Upgrade the reader software or try other mainstream reader software if the Guide (in PDF

format) cannot be opened.

All trademarks, registered trademarks and the company names in the Guide are the

properties of their respective owners.

Foreword IV

Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.

If there is any uncertainty or controversy, please refer to our final explanation.

Important Safeguards and Warnings V

Important Safeguards and Warnings

The following description is the correct application method of the device. Please read the

manual carefully before use, in order to prevent danger and property loss. Strictly conform to

the manual during application and keep it properly after reading.

Operating Requirement

Do not place and install the device in an area exposed to direct sunlight or near heat

generating device.

Do not install the device in a humid, dusty or fuliginous area.

Please keep its horizontal installation, or install it at stable places, and prevent it from

falling.

Do not drip or splash liquids onto the device; don’t put on the device anything filled with

liquids, in order to prevent liquids from flowing into the device.

Install the device at well-ventilated places; don’t block its ventilation opening.

Use the device only within rated input and output range.

Do not dismantle the device arbitrarily.

Please transport, use and store the device within allowed humidity and temperature range.

Power Requirement

The product shall use electric wires (power wires) recommended by this area, which shall

be used within its rated specification!

Use power supply that meets SELV (safety extra low voltage) requirements, and supply

power with rated voltage that conforms to Limited Power Source in IEC60950-1. For

specific power supply requirements, please refer to device labels.

Appliance coupler is a disconnecting device. During normal use, please keep an angle that

facilitates operation.

Table of Contents VI

Table of Contents

Cybersecurity Recommendations........................................................................................................... I

Foreword.................................................................................................................................................. III

Important Safeguards and Warnings.....................................................................................................V

1 Network Diagram................................................................................................................................... 1

2 Appearance............................................................................................................................................ 2

Front Panel.................................................................................................................................... 22.1 Rear Panel.................................................................................................................................... 32.2

3 Installation.............................................................................................................................................. 4

Installation Requirement............................................................................................................... 43.1 3.1.1 Notice.................................................................................................................................. 4

3.1.2 Guidance............................................................................................................................. 4

Installing Process.......................................................................................................................... 43.2 3.2.1 Installed on the Wall ........................................................................................................... 4

3.2.2 Installed in the Wall............................................................................................................. 7

4 Configuration...................................................................................................................................... 9

Configuration Process................................................................................................................... 94.1 Config Tool .................................................................................................................................... 94.2 Configuring VTO ........................................................................................................................... 94.3 4.3.1 Initialization......................................................................................................................... 9

4.3.2 Configuring VTO Number................................................................................................. 10

4.3.3 Configuring Network Parameters......................................................................................11

4.3.4 Configuring SIP Server..................................................................................................... 12

4.3.5 Configuring Call No. and Group Call................................................................................ 13

4.3.6 Adding VTO Devices......................................................................................................... 13

4.3.7 Adding Room Number...................................................................................................... 15

Verifying Configuration................................................................................................................ 164.4 4.4.1 Calling VTH from VTO...................................................................................................... 16

4.4.2 Doing Monitor from VTH................................................................................................... 17

5 Connecting Mobile Phone App.......................................................................................................... 19

Network Diagram 1

1 Network Diagram

Appearance 2

2 Appearance

Front Panel2.1

Front panelFigure 2-1

Table 2-1 Front panel description

No.

Name

Description

MIC

Inputs audio.

Camera

Monitors door area.

Indicator

When you are calling, this indicator will be on.

Indicator

During the call communication, this indicator will be on.

Indicator

When the door is unlocked, this indicator will be on.

Call button

Press to call VTH or the management center.

Speaker

Outputs audio.

Appearance 3

Rear Panel2.2

Rear panelFigure 2-2

Table 2-2 Rear panel description

Name

Description

Tamper

switch

The VTO would make alarm sound if it is being removed from the wall

by force, and the alarm will also be sent to the management center.

Cable

ports

GND: Ground.

+12V_OUT: Output 12V/100ma power.

RS485_B: RS-485 communication.

RS485_A: RS-485 communication.

ALARM_NO: Switch quantity output.

ALARM_COM: Switch quantity output.

EOC2: Two-wire port.

EOC1: Two-wire port.

DOOR_BUTTON: Unlock button.

DOOR_FEEDBACK: Door contact feedback.

GND: GROUND.

DOOR_NC: Connected to access controller to control door locks.

DOOR_COM: Connected to access controller to control door locks.

DOOR_NO: Connected to access controller to control door locks.

Ethernet

port

Connects to the network with Ethernet cable.

Only VTO whose models end with “P”support PoE.

Inhaltsverzeichnis

Andere Dahua Gegensprechanlage Handbücher

Dahua

Dahua VTO2000A Series Bedienungsanleitung

Dahua

Dahua KTP03 Bedienungsanleitung

Dahua

Dahua VTO6000A Bedienungsanleitung

Dahua

Dahua Villa Stücklistenhandbuch

Dahua

Dahua Villa Door Station Bedienungsanleitung

Dahua

Dahua D-VTO3312Q-P Bedienungsanleitung

Dahua

Dahua DHI-VTO2311R-WP Bedienungsanleitung

Dahua

Dahua VTO4202F-MK Bedienungsanleitung

Dahua

Dahua Digital VTH Series Bedienungsanleitung

Dahua

Dahua DHI-VTO3211D-P4-S1 Bedienungsanleitung

Dahua

Dahua Digital Villa VTO2 Series Bedienungsanleitung

Dahua

Dahua VTO4202F-P Bedienungsanleitung

Dahua

Dahua DHI-VTO2202F-P-S2 Bedienungsanleitung

Dahua

Dahua VTO6 series Bedienungsanleitung

Dahua

Dahua VTO5110B Bedienungsanleitung

Dahua

Dahua DHI-VTO2202F-P Bedienungsanleitung

Dahua

Dahua VTO6 series Bedienungsanleitung

Dahua

Dahua ASI1212D Bedienungsanleitung

Dahua

Dahua VTO2101E-P Bedienungsanleitung

Dahua

Dahua VTH2611L-WP Bedienungsanleitung

Dahua

Dahua VTO1220A Bedienungsanleitung

Dahua

Dahua Digital VTH Bedienungsanleitung

Dahua

Dahua Digital VTH Series Bedienungsanleitung

Dahua

Dahua Villa VTO Series Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung

Bticino

Bticino Classe 300 Bedienungsanleitung