Daikin DCS601B51 Bedienungsanleitung

Operation Manual

Use smart and save smart

●Thank you for purchasing intelligent Touch Controller.

●This operation manual contains notes for safe use of the

product.

For correct use, be sure to read this manual

carefully before use.

Store this manual close at hand so that it can be referred

to as required.

Model

DCS601B51

intelligent Touch Controller

We use recycled paper for making this operation manual.

Maintenance

Precautions 56

Maintenance

LCD Maintenance 57

When Leaving the Product

Turned OFF for a Long Time 57

Troubleshooting 58

Maintenance

For Your Information

Before useOperation

Before use

Safety Instructions

Be sure to follow the instructions below 1

System Overview 3

Features and Functions 4

Part Names and Functions 5

Part Names on the Monitoring

Screen and the Functions

List 9

Icon 11

Operation

Quick Reference 13

Air Conditioner Operation 14

Monitoring the Operation of Air Conditioner

System Setup Menu

For Your Information

Error Diagnostic Functions 65

Options 67

Double intelligent Touch Controllers

Specification 68

After-sales Service 69

Instructions given here are classified into the following two categories.

Instructions in both categories are important for safety and must be duly followed.

Caution

Warning

Failure to follow the instruction may lead to serious consequences including death or

serious injury.

Failure to follow the instruction may cause injury or material damage, which, in some

cases, leads to serious consequences.

When you have read this manual, be sure to store it in a place where the operator can conveniently refer to at

anytime.

In case of personnel change, be sure to give the manual to the new operator.

The symbol given in the manual shows the following:

Do not attempt to do things described in the

instruction. Be sure to follow the instruction.

Be sure to follow the instructions below

Safety Instructions

Read the manual carefully in advance for correct use

Warning Notes on use for users

When any abnormality (such as burnt smell) is

generated, turn the power OFF and contact the

dealer you purchased the product from.

Continuing to operate with

the abnormality left

unattended may cause

failure, electric shock or fire.

For remodelling or repair, contact the dealer

you purchased the product from.

Failure to remodel or repair

properly may cause water leak,

electric shock or fire.

For transferring or reinstallation, contact the

dealer you purchased the product from.

Failure to install properly may

cause water leak, electric shock

or fire.

Do not touch the inside of the controller.

Do not remove the front panel.

Touching the inside is dangerous

and may cause failure.

For inspection and

adjustment

of the inside of the controller,

contact the dealer you

purchased the product from.

Caution Notes on use for users

Do not install in a place subject to flammable

gas.

Leakage of gas resulting in

accumulation around the unit

may lead to ignition.

Do not install in a place subject

to direct sunlight.

Failure to follow the

instruction may lead to

discoloring of the LCD

that hinders proper

display.

Be sure to provide grounding.

Do not connect the grounding

wire to any gas pipe, water pipe,

lightning rod or telephone

grounding.

Inappropriate grounding may

lead to electric shock.

Do not install the controller in a place subject

to water.

Water in the device may lead

to electrical leak and failure

in the electronic components

inside.

Do not wipe the surface of the controller touch

panel with benzine, thinner or chemically-

treated dust cloth.

Failure to follow the instruction may

lead to discoloring or peeling of the

paint. Any soiling must be wiped off

with a piece of cloth soaked in a

diluted neutral

detergent and

wrung sufficiently.

Wipe again with a

dry piece of cloth.

To clean, be sure to stop operation and turn the

power OFF.

Failure to follow the

instruction may lead to

electric shock or injury.

Washing may lead to

electric shock.

Be sure to operate with the touch pen provided.

Failure to follow the

instruction may lead to

damage or failure.

Do not wash the controller

with water.

benzine thinner

Before use

System Overview

This intelligent Touch Controller is capable of controlling/monitoring up to 64 groups of indoor units (hereafter

“groups”).

The main functions of the intelligent Touch Controller include:

1. Collective starting/stopping of operation of the indoor units connected to the

intelligent

Touch Controller.

2. Starting/stopping of operation, temperature setting, switching between temperature control modes and

enabling/disabling of operation with the hand-held remote control by zone or group .

3. Scheduling by zone or group .

4. Monitoring of the operation status by zone or group .

5. Display of the air conditioner operation history.

6. Compulsory contact stop input from the central monitoring panel (non-voltage, normally-open contact).

7. Power distribution of the air conditioners. (With the optional DCS002A51)

∗A group of indoor units include:

∗Zone control with the intelligent Touch Controller

∗Zone control, which allows collective settings for more than one group, is available with the intelligent Touch

Controller, which facilitates the setting operations.

q One indoor unit without a remote control.

e Up to 16 indoor units controlled with one or two remote controls.

• One setting makes the same setting for all of the units in one zone.

• Up to 128 zones can be set with one intelligent Touch Controller.

(The maximum number of groups in one zone is 64.)

• Groups can be zoned at will with the intelligent Touch Controller.

• Units in one group can be divided into more than one zone.

w One indoor unit controlled with one or two remote controls.

intelligent Touch Controller

Zone 1

Up to 16 units Up to 16 unitsTwo remote controlsRemote control

No remote control Remote control Remote control

Indoor unit

Zone 5

Zone 2 Zone 3 Zone 4

Features and Functions

Operation Menu

intelligent

Touch Controller is capable of starting/stopping of the operation by the

group or zone. Collective starting/stopping is also available.

Air Conditioner Detail Setup

Temperature setting, switching between temperature control modes, switching of

speed and direction of wind and remote control mode setting are available by the

group, by the zone or collectively.

Monitoring of Various Information on Indoor Units

Information on operation such as the operation mode and temperature setting of

the indoor units, maintenance information including the filter or element cleaning

sign, troubleshooting information such as error codes can be displayed by the

group or the zone.



Zone Control Simplifying Complicated Setting Operations

Up to 64 groups can be controlled with the intelligent Touch Controller.

More than one group can be consolidated into a zone, which can be registered,

to allow the following settings by the zone. This eliminates the need for repeating

the same setting operation for each group. Function to allow collective setting for

all groups is also available.

Detailed Scheduled Operation Control

The intelligent Touch Controller allows detailed scheduled operation by the group,

by the zone or collectively. Up to 8 options for annual schedule can be set. Each

schedule can include four types of plans: for Weekdays, Holidays, Special days 1

and Special days 2. Each of the plans allows setting of up to 16 operations.



Diversified Operation Modes

Operation can be controlled both with the main unit and the remote control to

provide diversified operation management. Setting with the main unit allows the

following remote control settings by the group, by the zone or collectively:

1. Start/Stop 2. Operation Mode 3.Temperature Setting

:(Remote control) Inhibited :(Remote control) Inhibited :(Remote control) Inhibited

:(Remote control) Permitted :(Remote control) Permitted :(Remote control) Permitted

:Priority

• Start/stop

• Temperature setting

• Switching between operation modes

• Setting of direction and fan speed

• Disabling/enabling the remote control

See pages

14 16

See pages

17 21

See pages

22 24

See page 21

See pages

14 24

See pages

27 28

See pages

29 38

Handy Automated Control

The Intelligent Touch Controller can do the following.

•

Change Over Settings: automatically switches between cooling and heating

according to the room temperature.

•

Temperature Limit Settings: prevents the temperature from rising too high or too

low in unmanned rooms.

•

Heating Optimization Settings: stops uncomfortable hot air from blowing when

the heating thermo is off.

Before use

Be sure to use the touch pen for

operation of the touch panel of

the intelligent Touch Controller.

Operating with an object other

than the touch pen provided may

cause damage and failure.

Note

Part Names and Functions

Color LCD with Touch Panel

Provides a display for monitoring

and operation.

Be sure to use the touch pen

provided for operation.

The display shows the Monitoring

and System Setup screens.

PCMCIA Card Slot

Used when using the optional

power distribution (DCS002A51)

or updating the intelligent Touch

Controller software to a newer

version.

Maintenance Door

Generally not used. Close the

door for general use.

Use the door when adjusting the

contrast of the LCD or luminance

of the backlight.

Touch Pen

Use the touch pen for operation.

Be sure to use the touch pen for

operation.

Use caution not to lose the touch

pen.

When the pen is lost, contact the

dealer you purchased the

product from.

Before use

Terminals on the Back of intelligent Touch Controller

Use these ports for modem

communication when using the

AIRNET Service.

Connect the collective remote

control adapter to this connector

for “collective start of operation,”

“collective stop of operation”or

“error monitoring”remotely with a

contact signal.

This port is not used with

this model.

Connect a non-voltage contact for

collective stopping of operation

with a contact signal.

232C-1 232C-2 CN2

Ethernet LON L2 L1

COM Dil Pi3 COM Pi2 Pi1 F2 F1

Connect a watt-hour meter when

using the optional power

distribution function software

(DCS002A51).

Terminals for communication with

air conditioning system.

Terminal for the grounding wire.

Terminals for the power supply.

Connect single-phase power of

100 to 240 VAC, 50/60 Hz.

232C-1 232C-2 CN2

Ethernet LON L2 L1

COM Dil Pi3 COM Pi2 Pi1 F2 F1

This port is not used with

this model.

Before use

Contents of the List Currently Displayed

• When Group List is displayed

“Zone: Zone Name”

• When Zone List is displayed

“Zone List”

Display Mode Selection

Select between Zone and Group.

Zone/Group Name

Set the names in the Group

Registration or Zone Registration

in the System Setup Mode.

Filter/Element Sign

Displayed when there is any air

conditioner showing a filter or

element sign in the zone or the

group.

Target of Automatic Control

Displayed when there is any air

conditioner with the registration of

scheduled or change over or temperature

limit or heating mode optimization

operation in the zone or in the group.

Monitoring Screen Legend

Pressing the “?”button shows

more detailed legend.

Button to Switch to the System Setup Mode

Use this button for settings

including the time, group, zone

and schedule.

Description of Zone/Group

Set the names in the Group

Registration or Zone Registration

in the System Setup Mode.

System Status Display Area

Area for displaying the system

status (compulsory stop, etc.).

Part Names on the Monitoring Screen and the Functions

List

Information on Zone/Group Currently Displayed

Generally, the temperature setting and

the operation mode are displayed.

If any error occurs in the air conditioner,

the error code is displayed.

Zone/Group Currently Displayed

The name of the zone/group

currently selected is highlighted.

Inhaltsverzeichnis

Andere Daikin Controller Handbücher

Daikin

Daikin Maverick I Bedienungsanleitung

Daikin

Daikin Altherma EKWHCTRL1 Leitfaden

Daikin

Daikin EKRP1C14 Bedienungsanleitung

Daikin

Daikin DCM601B51 Bedienungsanleitung

Daikin

Daikin MicroTech III DPS Handbuch

Daikin

Daikin DCS004A71 Bedienungsanleitung

Daikin

Daikin Advanced plus Bedienungsanleitung

Daikin

Daikin QUG-Altherma Interface Gebrauchsanweisung

Daikin

Daikin FWEC1 Bedienungsanleitung

Daikin

Daikin System Manager Bedienungs- und Wartungsanleitung

Daikin

Daikin MicroTech III Bedienungsanleitung

Daikin

Daikin DCC601A51 Bedienungsanleitung

Daikin

Daikin RoCon U1 Bedienungsanleitung

Daikin

Daikin MicroTech III Bedienungsanleitung

Daikin

Daikin FWEC2T Leitfaden

Daikin

Daikin BRC1H61W Systemhandbuch

Daikin

Daikin iLINQ Bedienungsanleitung

Daikin

Daikin EHS157034 Bedienungsanleitung

Daikin

Daikin ECFWEB6 Bedienungsanleitung

Daikin

Daikin MicroTech III Handbuch

Daikin

Daikin RoCon HP Bedienungsanleitung

Daikin

Daikin KBRCS01A Gebrauchsanweisung

Daikin

Daikin IM 735-4 Handbuch

Daikin

Daikin MicroTech III Handbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch