Daikin BRC230Z4 Bedienungsanleitung

WIRED REMOTE CONTROLLER

OPERATION MANUAL

MODELS : BRC230Z4

BRC230Z8

BRC24Z4

BRC24Z8

01EN3P209820-1.indd101EN3P209820-1.indd1 2007/11/0612:04:582007/11/0612:04:58

01EN3P209820-1.indd201EN3P209820-1.indd2 2007/11/0612:05:142007/11/0612:05:14

READ BEFORE OPERATION

Name and Functions of Buttons ······························ 2

Preparation before Operation·································· 4

OPERATION

FAN · DRY · AUTO · COOL · HEAT Operation ········ 6

TIMER Operation ···················································· 8

SIMPLE 7 DAY TIMER Operation ························· 10

MULTI 7 DAY TIMER Operation ···························· 14

Explanation of the 7 DAY TIMER operation ·········· 16

ZONE Control························································ 17

TEMPERATURE SENSOR Switching (Option) ····· 18

Name registration ·················································· 19

CARE

Cleaning ································································ 21

CONTENTS

01EN3P209820-1.inddSec1:301EN3P209820-1.inddSec1:3 2007/11/0612:05:152007/11/0612:05:15

2READ BEFORE OPERATION

Name and Functions of Buttons

1 5

11 13

●Two remote controllers can connect to the system. In that case, the remote controllers

will work as master and sub remote controllers respectively.

The sub remote controller is the same in function as the master remote controller

except for time and day settings, which can be set in the master remote controller only.

●The settings in the master remote controller are reﬂected in the sub remote controller

and vice versa.

01EN3P209820-1.inddSec1:401EN3P209820-1.inddSec1:4 2007/11/0612:05:152007/11/0612:05:15

READ BEFORE OPERATION

1. ON/OFF button

Press this button to turn the air

conditioner ON and OFF.

2. MODE selector button

Press this button to select the AUTO/

COOL/HEAT/DRY/FAN mode.

3. FAN setting button

Press this button to select the airﬂow

rate.

4. TEMPERATURE adjustment

button

Press this button to make temperature

adjustment and other settings.

5. 7 DAY TIME CLOCK button

Press this button to go to the setting

display for the “ ” and

“”.

6. ON/OFF TIMER button

Press this button to set the ON TIMER

and OFF TIMER.

7. SHIFT button

Press this button to change the display at

the time of making settings.

8. ENTER button

Press this button to accept the settings

that have been made.

9. CLEAR button

Press this button to cancel settings.

10.TEST/EXIT button

Press this button to exit programs.

11. DAY/TIME button

Press this button to go to the clock and

day setting.

12.SELECT SENSOR button

Press this button for sensor selection.

13.FIXING SENSOR button

Press this button to enter the sensor

selection that has been made.

14.ZONE button

Press this button to make zone settings.

15.DISPLAY

The present settings are displayed on

the LCD.

(In this illustration, each section is shown

with all its displays ON for the purpose of

explanation.)

01EN3P209820-1.inddSec1:501EN3P209820-1.inddSec1:5 2007/11/0612:05:152007/11/0612:05:15

4READ BEFORE OPERATION

Preparation before Operation

■Turn the breaker ON

Turn the breaker ON if nothing is displayed on the LCD of the remote controller.

■Time and Day Settings

* If two remote controllers are connected, time and day settings can be made in the master remote

controller only.

1●“Mo”, “ ”, “SET” : blinks

●The above appears if no time and day settings have been made yet.

To change the current time and day settings, begin with STEP 2.

2Press “ button”.

●The normal display will appear after a while if you do

not press a button.

In this case press the “ button” once again.

3Press “ button”.

●“” is displayed on the LCD.

“Mo” blinks.

●Go to the day setting section.

4Press “ , button” and

select the day.

●Days are displayed on the LCD.

Mo Tu We Th Fr Sa Su

5Press “ button”.

●“” : blinks

●Go to the time setting section.

6Press “ , button” to

adjust the present time.

●Keep pressing the button to advance the displayed

time quickly.

01EN3P209820-1.inddSec1:601EN3P209820-1.inddSec1:6 2007/11/0612:05:152007/11/0612:05:15

READ BEFORE OPERATION

7Press “ button” to enter the

settings.

●The set time and day will be displayed.

■To cancel Time and Day Settings

1Press “ button”.

●The time and day setting screen will appear.

2Press “ button” for at least

4 seconds.

●The time and day settings are cancelled.

●Set the time and date again. (page 4.)

“Mo” and “SET” : blinks

NOTE

■Tips for saving energy.

●

Be careful not to cool the room too much.

Keeping the temperature setting at a moderate level helps save energy.

●

Cover windows with a blind or a curtain.

Blocking sunlight and air from outdoors increases the cooling effect.

■Please note.

●

The air conditioner always consumes a small amount of electricity even while it is not operating.

●

If you are not going to use the air conditioner for a long period, for example in spring or autumn,

turn the breaker OFF. When air conditioning is required ensure the breaker is switched on 6 hours

before operating the air conditioning system.

01EN3P209820-1.inddSec1:701EN3P209820-1.inddSec1:7 2007/11/0612:05:172007/11/0612:05:17

6OPERATION

FAN · DRY · AUTO · COOL · HEAT Operation

The air conditioner operates with the operation mode of your choice.

From the next time on, the air conditioner will operate with the same operation mode.

■To start operation

1Press “ button” and select an

operation mode.

FAN DRY COOL HEATAUTO

2Press “ button”.

●The air conditioner starts operating in the selected

mode.

■To stop operation

3Press “ button” again.

●The air conditioner comes to a stop.

■To change the temperature setting

4Press “ , button”.

DRY or FAN mode:

The temperature setting is not available.

AUTO or COOL or HEAT mode:

Press “button” to raise the temperature and

press “button” to lower the temperature.

Set to the temperature you like.

The temperature can be selected from a range of

16°C to 32°C.

01EN3P209820-1.inddSec1:801EN3P209820-1.inddSec1:8 2007/11/0612:05:182007/11/0612:05:18

OPERATION

■To change the airﬂow setting

5Press “ button” and select an

airﬂow rate.

●The volume of air is selectable from two levels while

the air conditioner is in either normal mode or AUTO

fan mode.

■Note on HEAT operation

●

Since this air conditioner heats the room by absorbing the heat from outdoor air and releasing

the heat to the indoors, the heating capacity drops in lower outdoor temperatures.

●

The heat pump system heats the room by circulating hot air around all parts of the room.

After the start of heating operation, it takes some time before the room sufﬁciently warms.

●

In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that

case, the system switches into defrosting operation to melt away the frost.

●

During defrosting operation, warm air will not ﬂow out of the indoor unit.

■Note on COOL operation

●

This air conditioner cools the room by absorbing the heat from the air within the room and

releases it outside, so if the outside temperature is high, performance drops.

■Note on DRY operation

●

The computer chip works to rid the room of humidity while maintaining the temperature as much

as possible. It automatically controls temperature and fan strength, so manual adjustment of

these functions is unavailable.

■Note on AUTO COOL/HEAT operation

●

In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based

on the room temperature at the start of the operation.

LCD while in cooling operation LCD while in heating operation

●

The system automatically reselects setting at a regular interval to bring the room temperature to

user-setting level.

■Note on airﬂow rate setting

●

The fan may stop while the air conditioner is in operation. In that case, if AUTO fan speed has been

selected, the fan will stop for 6 minutes continuously and then operate for 30 seconds or more (depends

on model). This function will occur every 6 minutes only when the room temperature is within the

selected temperature range. The AUTO fan function may not behave in the manner mentioned, in that

case your installer may have selected other fan settings during the commissioning of the controller.

●

AUTO fan settings will only operate when the “ ” is selected. When “ ” has

not been selected the AUTO fan function will operate the same as standard low and high speed setting.

●

The fan will operate for a period of 30 seconds to allow the temperature controller located in the

indoor unit to sample the room air temperature.

01EN3P209820-1.inddSec1:901EN3P209820-1.inddSec1:9 2007/11/0612:05:192007/11/0612:05:19

8OPERATION

TIMER Operation

Timer functions are useful for automatically switching the airconditioner on or off at night or in the morning.

You can also use ON TIMER and OFF TIMER in combination.

■To use ON TIMER and OFF TIMER operation

●

Make sure the day of the week and time are set.

If not, set the day of the week and time. (page 4.)

1Press “button” to select

ON TIMER or OFF TIMER.

ON OFF Normal display

●“”, “ON” and “ ” are displayed on the LCD.

●Setting other them “ ” may appear if timer has

been previously set.

2Press “ button”.

●“” is displayed on the LCD.

“” blinks.

●Go to the time setting section.

3Press “ , button” and

select time.

●The time is selectable in 1 hour increments from

1 to 12 hours.

4Press “ button”.

●The timer setting is complete.

●The normal display appears again and “ON” or “OFF”

is displayed.

●When the set time has passed, preset operation will

start or stop.

01EN3P209820-1.inddSec1:1001EN3P209820-1.inddSec1:10 2007/11/0612:05:202007/11/0612:05:20

Andere Handbücher für BRC230Z4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Daikin Fernbedienung Handbücher

Daikin

Daikin BRC1H63K Bedienungsanleitung

Daikin

Daikin BRC1H519W7 Benutzerhandbuch

Daikin

Daikin BRC4C61 Bedienungsanleitung

Daikin

Daikin BRC7M634F Bedienungsanleitung

Daikin

Daikin BRC082A43 Bedienungsanleitung

Daikin

Daikin BRC1H519K7 Benutzerhandbuch

Daikin

Daikin BRC1H519W Bedienungsanleitung

Daikin

Daikin OM-GS02-02110 Bedienungsanleitung

Daikin

Daikin BRC1E61 Bedienungsanleitung

Daikin

Daikin DCS303A51 Bedienungsanleitung

Daikin

Daikin ARC447A3 Gebrauchsanweisung

Daikin

Daikin WRC-COA Bedienungsanleitung

Daikin

Daikin MicroTech II Bedienungsanleitung

Daikin

Daikin ARC417 Series Bedienungsanleitung

Daikin

Daikin BRC7EA628 Bedienungsanleitung

Daikin

Daikin BRC2E61 Bedienungsanleitung

Daikin

Daikin BRC52B61 Bedienungsanleitung

Daikin

Daikin BRC7E530W Bedienungsanleitung

Daikin

Daikin BRC1H81S7 Installations- und Betriebsanleitung

Daikin

Daikin BRC082A41W Bedienungsanleitung

Daikin

Daikin BRC1E73 Bedienungsanleitung

Daikin

Daikin BRC1D619 Bedienungsanleitung

Daikin

Daikin BRC1D71 Bedienungsanleitung

Daikin

Daikin T9000 Handbuch

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung