Daikin OM-5RTBR-0709(0)-DENV Bedienungsanleitung

OPERATING

MANUAL

Part No.:R08019033605

OM-5RTBR-0709(0)-DENV

Manual De Funcionamento

Controlo Remoto Com Fio

Руководство По Зксплуатации

Проводной пульт дистанционного

управления

English

Operating Manual

Wired Remote Controller

Deutsch

Bedienungsanleitung

Kabelfernbedienung

Français

Mode D’emploi

Télécommande reliée par ﬁl

Nederlands

Bedieningsaanwijzing

Niet-draadloze Afstandsbediening

Español

Manual De Instrucciones

Control Remoto Con Cable

Italiano

Manuale Di Funzionamento

Telecomando Cablato

Ελληνικά

Português

Pycckий

Polski

Przewodowe zdalne

urządzenie sterujące

Türkçe

Kullanım Kılavuzu

Kablolu Uzaktan Kumanda

ENGLISH

A. Operating Guide

1. Upon power up of the unit, the LCD displays the main display screen

2000/01/01 [Sat] 12:00am

Status : OFF

Mode : Heating

Set Temp : 24°C

2. Press the ON/OFF button for 1 second to switch on the unit if the status shows OFF. The status

will change to ON. The ON/OFF LED will light up.

3. Press the COOL button for 1 second if cooling is required or the HEAT button if heating is

required.

4. The ‘Set Temp’ refers to temperature setting.

5. Press the ∞button once to view the compressor(s) on, off or defrost status.

2000/01/01 [Sat] 12:00am

Compressor 1 : ON

Compressor 2 : DEFROST

6. Press the ∞button again to view the temperature for room and outdoor ambient.

2000/01/01 [Sat] 12:00am

Return Air : 24.0°C

OutdoorAir : 24.0°C

7. Press the ∞button again to view the selected type for unit, number of compressor used, indoor

fan ‘always on’option, model and EEPROM version.

2000/01/01 [Sat] 12:00am

Type : H/Pump

No. Comp : 2 Comp

IDF Opt :

Model : 5RT90BR_E

EP.Rev : 0.0

8. Press the 5button to return to previous screen(s) or ESC to return to main screen.

9. Press the ALARM button to view or clear the alarm history. If alarm occurs, contact your

dealer or serviceman.

* Note: Display diagram is for illustration purpose only. It may differ for different models.

The display information shall be subjected to the setting in the main controller board.

∞

Original Instruction

B. Main Menu

1. Changes can be made to the factory setting parameter. This is done in the Main Menu. Press

ENTER button to go into the Main Menu.

2. The Main Menu consists of Operation Menu, Settings Menu, Timer Menu, Alarm Menu,

Warning Menu and Display Menu.

How to use the Main Menu?

Step 1

Press ENTER to view the sub-Menu under Main Menu.

Step 2

Go to the sub-Menu you want by pressing the 5or ∞button. Press ENTER to select the sub-

Menu.

Step 3

Go to the parameter you want to change or view by pressing the 5or ∞button. Press ENTER to

select this parameter.

Step 4

Change the parameter by pressing the 5or ∞button. Once completed press ENTER.

Press ESC to go back to previous screen until you see the initial display screen.

Operation Menu

This menu enables us to set the unit status (on or off), set the unit operation mode, change the

temperature setting, and manually defrost the unit (applicable for heating mode only).

Settings Menu

This menu enables us to set the parameters for unit operation (requires password entering), user

setting, change password, set panel option and unlock panel.

The panel option enables us to set the LCD backlight and contrast, set the alarm buzzer, enable

and disable the screen saver and set a screen saver timeout and set the temperature display in °C

or °F.

Note: The Set Parameter in the setting menu requires password for any changes to or to view

its parameter.

CAUTION:

All the passwordentering must be doneby local dealer/serviceman.User is not allowedto change

the value of the set parameter as this may cause damage to unit or deter its operation.

Timer Menu

This menu enables us to set the clock, set the date, set a 7 days schedule to start and stop the unit

and enable or disable the set schedule.

Alarm Menu

This menu enables us to view the alarm history and also clear the record. The panel can keep up

to 20 fault / alarm records.

Warning Menu

This menu enables us to view the warning history and also to clear the record. The panel can

keep up to 20 warning records.

Display Menu

This menu enables us to view the indoor heat exchanger sensor(s) temperature, outdoor heat

exchanger sensor(s) temperature, discharge sensor(s) temperature, solenoid valve(s) operation

status, compressor(s) run time record, EXV opening pulse, economizer operation status (applicable

for unit with economizer only), ﬁlter checking time, control type and software version. Some of

the submenu may require password for entering.

ENGLISH

Main Menu

Press ENTER to go to this menu.

MAIN MENU MAIN MENU

Operation Menu Timer Menu

Settings Menu Alarm Menu

Timer Menu Warning Menu

Alarm Menu Display Menu

Warning Menu

There are 6 sub menus in [Main Menu]. Press 5or ∞to select sub menus, ENTER to enter into

the sub menu or press ESC to exit to main display screen.

Operation Menu

Select [Operation Menu] in [Main Menu] and press ENTER to go to this menu.

OPERATION MENU

Status : OFF

Mode : Heating

Set Temp : 24°C

Manual Defrost

Some basic settings can be done here. Press 5or ∞to select the required setting. Then, press EN-

TER to enter the setting mode. Press 5or ∞to toggle the setting. Press ENTER again to conﬁrm

the setting. Press ESC to exit to [Main Menu].

Settings Menu

Select [Settings Menu] in [Main Menu] and press ENTER to go to this menu.

SETTINGS MENU SETTINGS MENU

Set Parameter Change Password 1

User Setting Change Password 2

Change Password 1 Panel Option

Change Password 2 Unlock Panel

Panel Option

Some advance settings can be found here. Press 5or ∞to select the required setting. Then, press

ENTER to enter the setting mode. Press 5or ∞to toggle the setting. Press ENTER again to conﬁrm

the setting. Press ESC to exit to [Main Menu].

Panel Option

Select [Panel Option] in [Settings Menu] and press ENTER to go to this menu.

Backlight ON : Normal

Alarm Buzzer : ON

Contrast : 50%

Brightness : Medium

Temp Unit : °C

Idle Pg Timeout : 10 m

Press 5or ∞to select the required setting, ENTER to enter into the setting.

Press 5or ∞to select the required option, ENTER to select the option.

Press ESC to exit to [Settings Menu].

* Note: Display diagram is for illustration purpose only. It may differ for different models.

The display information shall be subjected to the setting in the main controller board.

Timer Menu

Select [Timer Menu] in [Main Menu] and press ENTER to go to this menu.

TIMER MENU

Clock Setting

Date Setting

Timer Schedule

Timer : Enable

All the timer/schedule settings are included in this menu. Press 5or ∞to select the required setting.

Then, press ENTER to enter the setting mode. Press 5or ∞to toggle the setting. Press ENTER

again to conﬁrm the setting. Press ESC to exit to [Main Menu].

Clock Setting

Select [Clock Setting] in [Timer Menu] and press ENTER to go to this menu.

Set Time:

hh mm

12 : 00

Press 5or ∞to select the required option. Then, press ENTER to enter the setting mode. Press

5or ∞to toggle the setting. Press ENTER again to conﬁrm the setting. Press ESC to exit to

[Timer Menu].

Date Setting

Select [Date Setting] in [Timer Menu] and press ENTER to go to this menu.

Set Date:

yyyy mm dd

2000 / 01 /01

Day : [Sat]

Press 5or ∞to select the required option, ENTER to select the option.

Press ESC to exit to [Timer Menu].

Timer Schedule

Select [Timer Schedule] in [Timer Menu] and press ENTER to go to this menu.

TIMER SETTINGS

TIMER 1

ON OFF

Timer 1 Sun 0800 1800

Timer 2 Mon 0800 1800

Timer 3 Tue 0800 1800

Wed 0800 1800

This is the 7 days programmable timer schedule menu. There are 3 ON/OFF events in

one day. User can choose to set each day (Sunday - Saturday) ON/OFF timer.

Before this schedule can function, user needs to set the [Timer] in [Timer Menu] to enable.

Press ESC to exit to [Timer Menu].

* Note: Display diagram is for illustration purpose only. It may differ for different models.

The display information shall be subjected to the setting in the main controller board.

* *

ENGLISH

Alarm Menu/Warning Menu

Select [Alarm Menu]/[Warning Menu] in [Main Menu] and press ENTER to go to this menu.

ALARM MENU WARNING MENU

Show Alarms Show Warnings

Erase All Alarms Erase All Warnings

This place keeps records for all previous occurred faults/alarms/warnings.

User can view or clear these records. The panel can keep up to 20 faults/alarm warning records.

Press ESC to exit to [Main Menu].

Show Alarms/Show Warnings

Select [Show Alarms]/[Show Warnings] in [Main Menu] and press ENTER to go to this menu.

Alarm 1 WARNING 1

Indoor HEX 1 Indoor HEX 1

abnormal temp deice

2000/01/01 12:00am 2000/01/01 12:00am

The record shows: - Alarm/Warning description

- Alarm/Warning occurance date

- Alarm/Warning occurance time

Besides that, user can erase the alarm/warning record(s) in this menu (password is required).

Press ESC to exit to [Alarm Menu]/[Warning Menu].

Display Menu

Select [Display Menu] in [Main Menu] and press ENTER to go to this menu.

DISPLAY MENU DISPLAY MENU

Indoor HEX Sensor EXV Opening

Outdoor HEX Sensor Economizer

Discharge Sensor Filter Check

Solenoid Valve Control Type

Comp Run Time Software Version

This menu displays indoor heat exchanger sensor(s) temperature, outdoor heat exchanger

sensor(s) temperature, discharge sensor(s) temperature, solenoid valve(s) operation status,

compressor(s) run time record, EXV opening pulse, economizer operation status (applicable

for unit with economizer only), ﬁlter checking time, control type and software version. Some of

the submenu may require password for entering. Besides that, user can clear the

compressor run time record (password is required).

Press ESC to exit to [Main Menu].

* Note: Display diagram is for illustration purpose only. It may differ for different models.

The display information shall be subjected to the setting in the main controller board.

C. Installation

When installing the LCD panel to the bracket,

Step 1 Step 2

When removing the LCD panel from the bracket,

Step 1 Step 2

1. A3VDC battery is supplied with the LCD. It is used to ensure that the LCD displays real time

once the timer is set.

2. The LCD is wired to the main board via CN8 connection.

Hook the LCD panel

from the bottom ﬁrst

Push to fasten the LCD

panel to the bracket

Remove the LCD panel

from the top part ﬁrst Remove the

LCD panel

Inhaltsverzeichnis

Andere Daikin Fernbedienung Handbücher

Daikin

Daikin BRC315D7 Bedienungsanleitung

Daikin

Daikin BRC7E830 Bedienungsanleitung

Daikin

Daikin ALTHERMA Bedienungsanleitung

Daikin

Daikin BRC301B61 Bedienungsanleitung

Daikin

Daikin BRC1H63K Bedienungsanleitung

Daikin

Daikin BRC1H81S7 Installations- und Betriebsanleitung

Daikin

Daikin BRC7E61W Installationshandbuch

Daikin

Daikin BRC1H51W Bedienungsanleitung

Daikin

Daikin BRC1D61 Bedienungsanleitung

Daikin

Daikin BRC7C510W Bedienungsanleitung

Daikin

Daikin BRC1E61 Bedienungsanleitung

Daikin

Daikin BRC2E52C7 Bedienungsanleitung

Daikin

Daikin BRC7EB518 Bedienungsanleitung

Daikin

Daikin OH08-1 Bedienungsanleitung

Daikin

Daikin VRVWII RWEYQ10MY1 Bedienungsanleitung

Daikin

Daikin BRC1H519W7 Benutzerhandbuch

Daikin

Daikin BRC1E51 Bedienungsanleitung

Daikin

Daikin Madoka Bedienungsanleitung

Daikin

Daikin BRC2A71 Bedienungsanleitung

Daikin

Daikin BRC1H519W Bedienungsanleitung

Daikin

Daikin BRC7CB58 Bedienungsanleitung

Daikin

Daikin BRC52B61 Bedienungsanleitung

Daikin

Daikin ARC412A6 Bedienungsanleitung

Daikin

Daikin BRC7C51W Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung