DALCNET DLB1248 Series Anwendungshandbuch

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 1/10

FEATURES

• BLUE OO H+FADER+DIMMER+DRIVER

• DC Input: 12-24-48 Vdc

• Remote command options:

- Bluetooth Low Energy (BLE/Smart)

• Local command options:

- Normally Open push-button

• Adjusting the brightness of white light

• Current outputs or voltage outputs for R-L-C loads

• ypical efficiency > 95%

• Adjusting the brightness up to completed off

• Soft start and soft stop

• Optimized output curve

• Extended temperature range

• 100% Functional test - 5 Years warranty

➔For the whole and updated Device Manual refer to producer's website: http://www.dalcnet.com

Constant current variants

Application: Dimmer

CODE Input voltage Output Channels Commands

DLB1248-1CC350-BLE 12-48V DC 1 x 350mA 1 BLE – 1 N.O. push button

DLB1248-1CC500-BLE 12-48V DC 1 x 500mA 1 BLE – 1 N.O. push button

DLB1248-1CC700-BLE 12-48V DC 1 x 700mA 1 BLE – 1 N.O. push button

DLB1248-1CC950-BLE 12-48V DC 1 x 950mA 1 BLE – 1 N.O. push button

Any current value in range from 150mA to 1200mA is available on demand.

Constant voltage variants

Application: Dimmer

CODE Input voltage Output Channels Commands

DLB1248-1CV-BLE 12-48V DC 1 x 8A max 1 BLE – 1 N.O. push button

Protections

OTP Over temperature protection

OVP Over voltage protection

UVP Under voltage protection

RVP Reverse polarity protection

IFP Input fuse protection

SCP Short circuit protection

OCP Open circuit protection

CLP Current limit protection

DLB1248 single channel

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 2/10

Reference standards

EN 61347-1:2008+A1:2011+A2:2013 Lamp controlgear - Part 1: General and safety requirements

EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions

(equipment input current ≤ 16 A per phase)

EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,

voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated

current ≤ 16 A per phase and not subject to conditional connection

EN 62384:2006+A1:2009 DC or AC supplied electronic control gear for LED modules - Performance requirements

EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting

and similar equipment

EN 61547:2009 Equipment for general lighting purposes - EMC immunity requirements

EN 50581:2012 echnical documentation for the assessment of electrical and electronic products with respect

to the restriction of hazardous substances

Technical Specifications

Variants

Constant current Constant voltage

350mA 500mA 700mA 950mA

Supply voltage min: 10,8 Vdc .. max: 52,8 Vdc

Output voltage min: Vin/4 max: Vin-0,9V = Vin

Output current 350 mA 500 mA 700 mA 950mA max 8 A peak 1)

max 7,5A @20°C 1)

max 6,5A @40°C 1)

Absorbed nominal power 1) @12V 4.2 W 6 W 8.4 W 11.4 W 78 W

@24V 8.4 W 12 W 16.8 W 22.8 W 156 W

@48V 16.8 W 24 W 33.6 W 45.6 W 312 W

hermal shutdown 150 °C

D-PWM dimming frequency 300Hz

D-PWM resolution 16 bit

D-PWM range 0,1 – 100%

Storage emperature min: -40 max: +60 °C

Ambient emperature 1) min: -10 max: +40 °C

Protection grade IP20

Wiring 2.5mm² solid - 1.5mm² stranded - 30/12 AWG

Mechanical dimensions 44 x 57 x 25 mm

Package dimensions 56 x 68 x 35 mm

Weight 40g

1) maximum value dependent on the ventilation conditions

DLB1248 single channel

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 3/10

Installation

As shown below do the following steps to install the product:

1) connect the power supply (12-48 V) to the device terminals DC IN

2) connect the N.O. push button in the correct terminals of the device

3) connect the LED output terminals OU

DLB1248-1CC350-BLE

DLB1248-1CC500-BLE

DLB1248-1CC700-BLE

DLB1248-1CC950-BLE

DLB1248-1CV-BLE

DLB1248 single channel

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

N.O. Push Button

DLB1 48 1channel

BLE

DC In : 12÷48V

Out : CC / CV

LED DIMMER

PUSH

N.O.

DC IN OU

+ - L+ L-

BLE

SMART

SWITCHING

SUPPLY

+ -

Vout

230V

DC IN 1 / 4/48 Vdc

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 4/10

Technical Notes

Installation:

• Installation and maintenance must be performed onl b qualified personnel in compliance with current regulations.

• he product must be installed inside an electrical panel protected against overvoltages.

• he product must be installed in a vertical or horizontal position with the cover / label upwards or vertically; Other positions are not permitted.

It is not permitted to bottom-up position (with the cover / label updown).

• Keep separated the circuits at 230V (LV) and the circuits not SELV from circuits to low voltage (SELV) and from any connection with this

product. It is absolutely forbidden to connect, for any reason whatsoever, directly or indirectly, the 230V mains voltage to the bus or to other

parts of the circuit.

Power Supply:

• For the power supply use only a SELV power supplies with limited current, short circuit protection and the power must be dimensioned

correctly.

In case of using power supply with ground terminals, all points of the protective earth (PE = Protection Earth) must be connected to a valid and

certified protection earth.

• he connection cables between the power source "low voltage" and the product must be dimensioned correctly and they should be isolated

from every wiring or parts at voltage not SELV. Use double insulated cables.

• Dimension the power supply for the load connected to the device. If the power supply is oversized compared with the maximum absorbed

current, insert a protection against over-current between the power supply and the device.

• For the constant current output, the voltage of LED module (Vf) must be less of 5V at the voltage of power supply.

Command:

• he length of the connection cables between the local commands (N.O. Push button or other) and the product must be less than 10m; the

cables must be dimensioned correctly and they should be isolated from every wiring or parts at voltage not SELV. Use double insulated

shielded and twisted cables.

• All the product and the control signal connect at the local command (N.O. Push button or other) must be SELV (the devices connected must

be SELV or supply a SELV signal)

Outputs:

• he length of the connection cables between the product and the LED module must be less than 10m; the cables must be dimensioned

correctly and they should be isolated from every wiring or parts at voltage not SELV. Is preferable to use shielded and twisted cables.

DLB1248 single channel

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 5/10

LOCAL COMMAND

PUSH DIMMER FEA URE

The intensity and the status change (ON/OFF) are controlled by the N.O. push button.

Button Intensity

Click

Double Click

Long pressure (>1s) from OFF

Long pressure (>1s) from ON

Long pressure (>5s) case BLE from ON

On/Off

Maximum intensity

urn ON at 1% (Nightly ime), then dimmer up/down

Dimmer up/down

Device recognition from BlueDimmer APP

DLB1248 single channel

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 6/10

Bluetooth SMART SETUP

Features

• Bluetooth LOW ENERGY 4.1

Functions

RELATION WITH LOCAL COMMANDS

Both local and remote commands can act simultaneously.

The remote control can monitor the output status in real time.

ADDRESSING

Unique ID 

CHANNEL MAPS

The intensity and the status (ON/OFF) is controlled by a Bluetooth device

Channel Function Value

1 Dimmer Intensity [0..255]

Intensity [0..255]

COMPATIBLE APPS

•Bluedimmer:

he BlueDimmer Low Energy application is used to control through smartphone and tablet modules and strip LED connected to

the dimmer DLB1248-BLE-1CH.

he APP implements the following functions:

•turning on

•turning off

•dimmer up and down

•master dimmer of multi source

DLB1248 single channel

Bluetooth SMAR SE UP

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1 48 1channel

BLE

DC In : 12÷48V

Out : CC / CV

LED DIMMER

PUSH

N.O.

DC IN OU

+ - L+ L-

BLE

SMART

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 7/10

BLUEDIMMER SOFTWARE INSTRUCTIONS

Necessary conditions for the correct use of the device:

•APPLE devices with ON Bluetooth Low Energy 4.1 version

•ANDROID devices with ON Bluetooth Low Energy 4.1 version

•Dalcnet Product DLB1248 with BLE smart function

•Strip Led or spotlight

•N.O. Push-Button

•Bluedimmer App , available on the App Store and Play Store, download for free.

SCHEME

DLB1248 single channel

Bluetooth SMAR SE UP

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 8/10

APP INSTALLATION ON THE DEVICE

Download for free and install the application on your smartphone and tablet.

OBSERVA ION:

On the version of Android 6.0 is necessary to allow at BlueDimmer application to access

your location.

S AR UP SEQUENCE IMAGES

Automatic research and identification of DALCNE DLB1248 with BLE function products.

N.B.:

Manual research is possible by clicking on the lens symbol at the bottom of your device's screen.

Examples of results of the research:

- Device in blu= device associated and ready for use

- Device in black= new device to pair

- Device in grey= device already associated but not available

DLB1248 single channel

Bluetooth SMAR SE UP

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 9/10

HOW O ASSOCIA E HE DEVICE O HE BLUEDIMMER APPLICA ION

1 – Select on the smartphone/tablet the connected device.

he strip led or spotlight connected to the selected device will automatically light on

2 – Keep press for 5 sec the push button connected to the light-on-led for pairing.

3 – On the screen will appear a box to name the strip led or spotlight controlled by DALCNE BLE device.

For ex.: you can name 'kitchen' the light in the kitchen, and 'living' the one in the living room. his is a simple way to control the lights in your

house.

DLB1248 single channel

Bluetooth SMAR SE UP

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

DLB1248 single channel

EASY-BLE

Device Manual FW 1.0+

Made in Italy

Rev. 2016-12-16

pag. 10/10

4 – DALCNE device has now been correctly paired and ready for use.

You will see the lamp name on the display. Here you can start controlling your led light.

LEGEND:

on / off

dimmer

back to search devices menù

DLB1248 single channel

Bluetooth SMAR SE UP

LED DRIVERS

DALCNET S.r.l.

Registered office: via Meucci, 35 - 36040 Brendola (VI) - Ital

Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Ital

Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453

VAT: IT-04023100235

info@dalcnet.com www.dalcnet.com

Andere Handbücher für DLB1248 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DALCNET Gleichstromantrieb Handbücher

DALCNET

DALCNET DLC1248 Series Anwendungshandbuch

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung