Dali HELICON IW 200 Phantom Bedienungsanleitung

Thank you for choosing DALI In-Wall loudspeakers!

DALI is acclaimed around the world for unique loudspeakers designed and

built to our uncompromising standards for design and performance.

DALI’s main area of expertise is the development and reﬁnement of known

and new techniques in the ﬁelds of audio and acoustics.

The goal for every single DALI loudspeaker is to create a listening experience

in your home that will make you forget time and place.

It is essential that your DALI In-Wall loudspeakers are correctly installed and

connected. This owner’s manual contains our guidelines for installation, con-

nection and maintenance.

NOTE: The sections on installing and painting the loudspeaker is for the use

of professional installers. If you have any questions, please feel free to con-

tact your authorised DALI dealer.

Enjoy!

Safety Guidelines

• Always follow all safety guidelines

• DALI Helicon IW 200 Phantom is intended for home use only. It is not

intended for use in professional environments such as alarmsystems,

public address, etc.

• The speaker must only be used indoors and never in wet areas or at

extreme hot or cold temperatures

• DALI Helicon IW 200 Phantom must not be exposed to direct sunlight

• DALI Helicon IW 200 Phantom must be installed with a secure drop wire

support line

• Power off the ampliﬁer when connecting the speaker cables

Parts List

The following parts are enclosed:

• 1 Helicon IW 200 Phantom

• 1 3 mm Allen wrench

• 1 mounting template

• 1 protective template for painting

• 1 owner’s manual

• 1 white logo badge

About In-Wall Loudspeakers

DALI Helicon IW 200 Phantom provides the

unique, acclaimed sound of a true DALI Heli-

con loudspeaker for easy and discreet integra-

tion into your home.

DALI Helicon IW 200 Phantom is equally

suited for stereo and surround systems where

sublime sound quality is a high priority.

DALI recommends the use of a subwoofer such

as DALI Helicon S600 in conjunction with Heli-

con IW 200 Phantom. This will permit the repro-

duction of the lowest frequencies for an overall

enhancement of your sound system.

Your choice of cables is a crucial element in

your installation. Be aware that replacing

cables after installation is a difﬁcult task.There-

fore, select quality cables such as DALI Silver

Wave Two.

Mounting Template

The enclosed template can be used to initially visualise how your speakers should

be mounted. Then, tape the template perfectly level at the selected mounting

position, so that you can mark the necessary opening.

Helicon IW 200 Phantom

DALI Helicon IW 200 Phantom incorporates dog-

leg brackets for wall or ceiling mounting. The

brackets attach the loudspeaker ﬁrmly to the

rear of the surface on which it is mounted. They

extend out at a 90 degree angle when the screws

are tightened. The screws should be tightened

so that the loudspeaker sits securely in place

- but be careful not to tighten them too much.

If you need to remove the loudspeaker, loosen

the screws approximately 5 to 10 turns counter-

clockwise and the brackets will loosen their grip.

Do not unscrew more than 5 to 10 turns or the

bracket may fall off the screws.

DALI Helicon IW 200 Phantom must be ﬁtted

with a drop wire to prevent the speaker from fall-

ing in the event of ﬁre, earthquake, etc. To pre-

vent injury or damage from a fall, ﬁt a steel wire

or other non-ﬂammable connection between a

solid support in the house (ceiling beam, wall

stud, etc.) and the eyehook on the Helicon IW

200 Phantom as shown.

Connect cables so that the loudspeaker is in cor-

rect phase.The red (+) loudspeaker terminal must

be connected to the red (+) ampliﬁer terminal.The

black (-) loudspeaker terminal must be connected

to the black (-) ampliﬁer terminal.

Remove insulation so that approx. ½” of bare

wire is exposed. Press the top of the terminal

down and insert the bare wire into the open-

ing. When the wire is fully in place with no loose

strands exposed, release the terminal. The cable

is now connected.

-!8#-v$2/0

34%%,7)2%

#%,,).'7!,,

Skabelonen skal være 100% vandretfør skæring

NORMAL

LOWFREQ LEVEL

ENHANCED

The Inﬂuence of the Listening Room

Every room has it own acoustics that affect the way we hear sound from loud-

speakers. It is a question of how the room receives acoustic energy and releases it

again. You can improve the acoustics of your listening room in different ways.

Part of the sound that you hear does not come directly from the loudspeaker.

Instead, it is reﬂected from the ﬂoor, ceiling and walls. Reﬂections can be reduced

by furniture, plants and carpets. If the sound is overly bright, soft, absorbent

objects like curtains and carpets can help.

Both the quantity and quality of deep bass depend on the size and shape of the

room and the placement of the loudspeakers in it. For instance, bass can be

boosted by placement near a sidewall and even more by placement in a corner.

Corner placement provides substantial added reﬂections.

As a general guideline, avoid large, hard, reﬂective surfaces in the immediate

vicinity of the loudspeakers.

Placement in the Listening Room

DALI Helicon IW 200 Phantom incorporates Wide

Dispersion technology.

Wide Dispersion means that the area in front

of the loudspeakers where a full three-dimen-

sional sonic image is achieved is a great deal

wider than with other loudspeakers. This ensures

substantially better sound across a larger area

within your listening room, when compared to

loudspeakers without Wide Dispersion charac-

teristics.

In a stereo system, the speakers should ideally be

placed the same distance from each other as the

distance from each speaker to a central listen-

ing position. The ideal mounting height for DALI

Helicon IW 200 Phantom is at the listener’s ear

level when seated at the listening position, i.e.

typically 40” - 50” above the ﬂoor.

For surround systems, the same guidelines as for

stereo apply with the following additions:

The center speaker should be placed exactly in

the middle between the left/right front speakers.

The rear speakers should be placed in same

height as the front speakers. It is possible to

place the speakers higher because of the good

sound dispersion from the speakers.

X X

1110

Installation

Please study and follow the safety

guidelines found on page 2 and 4 of this

manual!

DALI Helicon IW 200 Phantom must be

installed by a trained professional to

ensure that all safety requirements are

met to prevent it from falling, etc.

The following tools and items are necessary for

proper installation:

• Spirit level and tape measure

• Pencil and saw or knife

• 3 mm Allen wrench

(included with loudspeaker)

• Wire cutter and cutting nippers for

mounting of steel wire

• Drill and bit

• Steel wire

• Hook and rawlplugs of the correct sizes

• Paint (if needed)

• Protective template (if needed)

• Compressed air (if needed)

When the correct placement has been found, tape

the mounting template to the surface perfectly

level. Outline the cut-out area with a pencil.

Remove the template and drill holes for insertion

of saw or knife. Saw/cut carefully along the line

marked in pencil.

"%7!2%/&).34!,,!4)/.3

0!30±).34!,,!4)/.%2

NORMAL

LOWFREQ LEVEL

ENHANCED

Installation

A steel drop wire must be ﬁrmly attached

between a solid support in the house (ceiling

beam, wall stud, etc.) and the eyehook on the

DALI Helicon IW 200 Phantom in order to hold

the speaker in case of a fall. This is particularly

important for ceiling mounting, where a falling

speaker can be life-threatening!

Connect cable to the terminals - being careful

to connect the ampliﬁer’s red (+) terminal to the

loudspeaker’s red (+) terminal and the ampliﬁ-

er’s black (-) terminal to the loudspeaker’s black

(-) terminal.

Loudspeaker cable must not hang loose from

the terminals. It must be securely fastened with

cable ties or by other means inside the wall. If left

unsupported, cable can gradually come loose,

creating a poor electrical connection between

wire and terminals.

Turn on the system and listen to the loudspeak-

ers before ﬁnal mounting to make sure that all

connections are correct.

Insert the speaker in the wall opening and

tighten the 6 screws in the loudspeaker brack-

ets with the enclosed Allen wrench so that the

speaker is ﬁrmly mounted in place. Be careful to

avoid over-tightening the screws and shredding

the thread.

-!8#-v$2/0

34%%,7)2%

#%,,).'7!,,

hCM

hCM

hCM

1312

Painting the Loudspeaker (optional)

Painting the loudspeaker requires great care and attention and should

only be done by a qualiﬁed professional

The loudspeaker’s frame and front grille can be painted in colours to match your

home decor. We recommend spray paint.

It is extremely important for the loudspeaker’s performance that no paint touches

the drive units. Therefore, it is necessary to cover the black front and the drive

units with the enclosed protective template before painting.

NOTE: When painting the loudspeaker, do not remove the drive units and the

switch. The front grille should be removed from the loudspeaker before painting.

Before painting the front grille, remove the logo

badge. After painting, it can be replaced with

the new logo badge enclosed with the loud-

speaker.

The protective template must be carefully posi-

tioned, because the drive units are very sensitive

and can be damaged by even the slightest pres-

sure. When the frame has been painted and the

paint is dry, remove the template. It can be used

again, if you wish to re-paint the loudspeaker

later.

The front grille must be painted only from the

front. After painting, spray its rear with com-

pressed air to remove any paint in the holes.

Dried paint can block the sound.

Maintenance

Clean the loudspeaker with a soft, dry cloth. If the cabinets are dirty, a soft cloth

wrung out in a mild household cleaning agent can be used. Be very careful when

dusting off the driver cones and domes, as they are very sensitive. The front grilles

can be vacuumed and, if necessary, wiped with a lint-free cloth wrung out nearly

dry in a mild household cleaning agent.

Enjoy!

Once again, thank you for choosing DALI. We

remind you that your authorised DALI Helicon

dealer will be glad to assist with advice on con-

necting and adjusting your new loudspeakers.

Finally, we would like to invite you to visit our

website - www.dali.dk - for more information

on DALI and the technology behind the Helicon

series.

HELICON IW HELICON 800 HELICON 400 HELICON 300

200 Phantom

In-Wall Speaker Main Speaker Main Speaker Compact Speaker

Frequency range +/- 3 dB (Hz) 64 - 27000 31 - 27000 31.5 - 27000 37 - 27000

Sensitivity (2.83 V/1m) (dB) 89 89.5 88 86

Nominal impedance Ω8 4 4 4

Maximum SPL (dB) 107 113 111 108

Crossover frequencies (Hz) 3000/13000 580/3000/13000 (700)/3000 (13500) 3400 (13000)

Bas reﬂex tuning frequency (Hz) - 28.5 32 34.5

Enclosure type Sealed Reﬂex Reﬂex Reﬂex

Placement In-wall Floor Floor Stand

Recommended Amp. power (Watt) 30 - 150 50 - 400 50 - 300 50 - 200

Ampliﬁer - - - -

High frequency drivers 1 x 25 mm soft dome 1 x 25 mm soft dome 1 x 25 mm soft dome 1 x 25 mm soft dome

1 x 10 x 55 mm ribbon 1 x 10 x 55 mm ribbon 1 x 10 x 55 mm ribbon 1 x 10 x 55 mm ribbon

Midrange drivers - 1 x 6½" - -

Low frequency drivers 1 x 6½" 2 x 8" 2 x 6½" 1 x 6½"

Connection inputs Single wire Bi-wire Bi-wire Bi-wire

Controls - - - -

Dimensions (HxBxD) (cm) 47.7 x 28.5 x 11.0 112.6 x 25.5 x 49.3 102.6 x 21.9 x 45.7 43.5 x 20.8 x 35.6

Dimensions (HxBxD) (inches) 18.78 x 11.22 x 4.33 44.33 x 10.04 x 19.41 40.39 x 8.62 x 17.99 17.13 x 8.19 x 14.02

Weight (kg/lb) 7/15 41/90 32/70 40/22

Finish White laquer, High gloss High gloss High gloss

NCS S0502-Y cherry and rosenut cherry and rosenut cherry and rosenut

HELICON C200 HELICON W200 HELICON S600

Centre Speaker Wall Speaker Active Subwoofer

Frequency range +/- 3 dB (Hz) 49 - 27000 41 - 27000 25 - 175

Sensitivity (2.83 V/1m) (dB) 90 89 -

Nominal impedance Ω4 4 20 k

Maximum SPL (dB) 111 108 117

Crossover frequencies (Hz) 2800/13000 3000/13000 45 - 120

Bas reﬂex tuning frequency (Hz) 36 - -

Enclosure type Reﬂex Sealed Sealed

Placement On top/below TV or on S600 On wall/Stand Floor

Recommended Amp. power (Watt) 40 - 250 30 - 150 -

Ampliﬁer - - 300 W RMS

High frequency drivers 1 x 25 mm soft dome 1 x 25 mm soft dome -

1 x 10 x 55 mm ribbon 1 x 10 x 55 mm ribbon -

Midrange drivers - - -

Low frequency drivers 2 x 6½" 1 x 6½" 2 x 12" long throw

Connection inputs Bi-wire Bi-wire RCA, Stereo (low-pass ﬁltered)

RCA, Mono (LFE)

Controls - - Volume, Crossover, Frequency, Phase

Dimensions (HxBxD) (cm) 21 x 65 x 43.5 45.2 x 32.6 x 21.4 64.2 x 42 x 41.5

Dimensions (HxBxD) (inches) 8.27 x 25.59 x 17.13 17.8 x 12.83 x 8.13 25.28 x 16.54 x 16.34

Weight (kg/lb)) 18/41 10/21 40/88

Finish High gloss High gloss High gloss

cherry and rosenut cherry and rosenut cherry and rosenut

Technical Speciﬁcations

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dali Sprecher Handbücher

Dali

Dali PHANTOM M-675 Bedienungsanleitung

Dali

Dali KATCH G2 Bedienungsanleitung

Dali

Dali MegaLine III Bedienungsanleitung

Dali

Dali KORE Bedienungsanleitung

Dali

Dali FAZON SAT Bedienungsanleitung

Dali

Dali MS 4 Bedienungsanleitung

Dali

Dali PHANTOM H-120 Bedienungsanleitung

Dali

Dali Grand Bedienungsanleitung

Dali

Dali ALTECO C-1 Bedienungsanleitung

Dali

Dali KATCH G2 Bedienungsanleitung

Dali

Dali Opticon Bedienungsanleitung

Dali

Dali 3b Bedienungsanleitung

Dali

Dali EPICON Bedienungsanleitung

Dali

Dali Phantom Kompas Bedienungsanleitung

Dali

Dali PHANTOM LEKTOR Bedienungsanleitung

Dali

Dali PHANTOM H Series Bedienungsanleitung

Dali

Dali MOTIF LCR Bedienungsanleitung

Dali

Dali OPTICON 6 MK2 Bedienungsanleitung

Dali

Dali PHANTOM E-60 Bedienungsanleitung

Dali

Dali SUB E-12F Bedienungsanleitung

Dali

Dali RUBICON C Bedienungsanleitung

Dali

Dali SUITE Bedienungsanleitung

Dali

Dali CONCEPT 1 Bedienungsanleitung

Dali

Dali PHANTOM H-50 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung