Danby DPA120CB1WDB Montageanleitung

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET D'ENTRETIEN

MODEL • MODÈLE

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

2016.12.20

MODEL * MODÈLE

DPA120CB1WDB

DPA120UB1WDB

DPA140CB1WDB

DPA140UB1WDB

DPA120B3WDB

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

This product is factory equipped with a power supply cord that has a three-pronged ground-

ed plug. It must be plugged into a mating grounding type receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. If the circuit does not

have a grounding type receptacle, it is the responsibility and obligation of the customer to

exchange the existing receptacle in accordance with the National Electrical Code and ap-

plicable local codes and ordinances. The third ground prong should not, under any circum-

stances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been

checked and tested by a qualiﬁed electrician or electrical supplier. Improper connection of

the grounding plug can result in risk of ﬁre, electric shock and/or injury to persons associat-

ed with the appliance. Check with a qualiﬁed service representative if in doubt that the appli-

ance is properly grounded.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il

doit être branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code

national de l’électricité et les codes et règles locaux applicables. Si la prise murale n’a pas de

mise à la terre, il est de la responsabilité et l’obligation du client de changer la prise existante

pour la rendre conforme au Code national de l’électricité et aux codes et règles locaux

applicables. La ﬁche de mise à la terre ne doit pas, en aucune circonstance, être coupée ou

retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le cordon d’alimentation,

la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été vériﬁée

et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique. Une ﬁche de

mise à la terre mal branchée peut entraîner un risque d’incendie, de choc électrique ou de

blessures aux personnes qui utilisent l’appareil. Si vous n’êtes pas certain que l’appareil est

correctement mis à la terre, consultez un préposé du service qualiﬁé.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide ................................1-16

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et d’entretien............................17-32

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

CONTENTS / TABLE DES MATIÈRES

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁrst use of this product.

AVERTISSEMENT :

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

Model • Modèle

DPA120CB1WDB / DPA120UB1WDB / DPA140CB1WDB / DPA140UB1WDB

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service. We suggest

that you read this Owner’s Manual before plugging in your new appliance as it contains important operational information,

safety information, troubleshooting and maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.Danby.com to access self-service tools, FAQs and much more. For additional assistance call 1-800-263-2629.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Model Number:

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

SAFETY PRECAUTIONS

ALWAYS DO THIS

Your air conditioner should be used in such a way that it is protected from moisture, e.g. condensation,

splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or

any other liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place on a stable, level surface during use.

If the unit is transported laying on its side it should be stood up and left unplugged for 6 hours.

Turn off the unit when not in use.

Always contact a qualiﬁed person to perform repairs. If the power cord is damaged it must be repaired by

a qualiﬁed technician.

Keep the unit away from walls, furniture and curtains with a clearance of at least 30 cm all around.

If the air conditioner is knocked over during use, turn off the unit and unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

NEVER DO THIS

Do not operate your air conditioner in a wet room such as a bathroom or laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than your ﬁngers.

Do not remove any ﬁxed components. Never use this appliance if it is not working properly, or if it has

been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or come into contact with the unit.

Do not use the unit in the presence of inﬂammable substances or vapour such as alcohol, insecticides,

gasoline, etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this instruction manual.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

ENERGY SAVING TIPS

OPERATING

CONDITIONS

TOOLS FOR WINDOW KIT

INSTALLATION

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air ﬂow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the ﬁlters clean.

• Keep doors and windows closed to keep cool air in and warm air out (cooling mode)

The air conditioner must be operated within the temperature range

indicated below:

Note: Performance may be reduced outside of these operating temperatures.

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide

Identifying Parts

WARNING

• Do not store or use gasoline or other ﬂammable vapours and liquids in the vicinity of this or any other

appliance.

• Avoid ﬁre hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any

prong from the power cord.

ELECTRICAL INFORMATION

WARNING

• Be sure the electrical supply is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize shock and ﬁre hazards, proper grounding

is important. The power cord is equipped with a three-prong grounding plug for protection against

shock hazards.

• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a

qualiﬁed electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is installed.

MODE ROOM TEMPERTURE

Cool 17°C (62°F) ~ 35°C (95°F)

Dry 13°C (55°F) ~ 35°C (95°F)

POWER OUTAGE In the case of a power outage, the unit will automatically re-start with the last setting

after the power is restored.

Wait 3 minutes before resuming operation

After the unit has stopped, it cannot operate for the ﬁrst 3 minutes. This is to protect

the unit. Operation of the compressor will automatically start after 3 minutes.

Identifying Parts

ACCESSORIES

Ensure that all the accessories are

included in the package and refer to

the installation instructions for their

usage.

Note: All the illustrations in this

manual are for explanatory

purposes only. Your air conditioner

may be slightly different.

UNIT STRUCTURE

 "74&2;&/.F >.;&;DF

.&;F 3;05F 

  C%?8;F08#F 

 &. 0AF*' #5F 3;15F 

 0+;F 

  &. 0AF,' #5FF 

    &. 0AF*' #5FF. FF 

 0-F#*FF %#9(@#F





  0-F#*FF %#9(@#F 

 1-F#*FF1. %#9'@#F 

  $?6'<EF6)$=F.!FF6$B:F 

  4&.F09#F 

#-1;#F0.;50**#5F. F;;#5DF

  

 

1. Control panel

2. Horizontal louver blade

(adjusts automatically)

3. Caster

4. Carrying handle (both

sides)

5. Upper air ﬁlter (behind the

grill)

6. Upper air intake

7. Air outlet

8. Power cord outlet

9. Power cord buckle (use

only when storing the unit)

10.Bottom tray drain outlet

11.Power plug socket (use

only when storing the unit)

12.Lower air ﬁlter (behind the

grill)

13.Lower air intake

14.Drain outlet

910 11

Features

ELECTRONIC CONTROL INSTRUCTIONS AND OPERATING MODES

POWER button

Turns power on/off.

SLEEP button

Used to initiate the SLEEP operation.

FAN button

Controls the fan speed. Press to toggle between three fan speeds: HIGH (press 1 time), MEDI-

UM (press 2 times) and LOW (press 3 times). The fan speed indicator light indicates the correspond-

ing fan setting. Press the button a fourth time to initiate AUTO-FAN mode.

UP and DOWN buttons

Used to adjust (increase / decrease) temperature settings (1°C/1°F increments) in a range

of 17°C(62°F) to 30°C(86°F) or the TIMER setting in a range of 0~24hrs. The control is capable of

displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other,

press and hold the Up and Down buttons at the same time for 3 seconds.

MODE select button

Selects the appropriate operating mode. Each time you press the button, a mode is selected in

a sequence that goes from AUTO, COOL, DRY, and FAN. The mode indicator light illuminates de-

pending on the mode settings.

TIMER button

Used to initiate the AUTO ON start time andAUTO OFF stop time program, in conjunction with the up

& down buttons.

SWING button

(select models only) Used to initiate the Auto swing feature. When operating press the SWING

button to stop the louver at the desired angle.

LED DISPLAY

Shows the set temperature in °C or °F and the Auto-timer settings. While on DRY and FAN

modes, it shows the room temperature.

567

Operating Instructions

OPERATING MODES

COOL mode

• Press the “MODE” button until the “COOL” indicator light comes on.

• Press the UP or DOWN arrow buttons to select your desired room temperature. The temperature

can be set within a range of 17°C-30°C / 62°F-86°F.

• Press the “FAN SPEED” button to choose the fan speed.

AUTO mode

• When you set the air conditioner in AUTO mode, it will automatically select cooling, or fan only

operation depending on what temperature you have selected and the room temperature.

• The air conditioner will adjust the room temperature automatically to the set temperature point.

• Under AUTO mode, you cannot select the fan speed.

DRY mode

• Press the “MODE” button until the “DRY” indicator light comes on.

• Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor oper-

ates at LOW speed.

• Keep windows and doors closed for the best dehumidifying effect.

• Do not use the window hose under this mode.

FAN operation

• Press the “MODE” button until the “FAN” indicator light comes on.

• Press the “FAN SPEED” button to choose the fan speed (1 time for HIGH, 2 times for MEDIUM, 3

times for LOW, 4 times for AUTO-FAN).

• The corresponding fan speed indicator light for each speed lights up.

• The temperature cannot be adjusted.

• Do not use the window hose in this mode.

SLEEP function

Simply press the sleep button. When in cooling mode, the temperature will increase by 1°C / 2°F

every half hour for 1 hour. The unit will then hold this new temperature for 7 hours before returning to

the original temperature setting and resuming normal operation.

NOTE: This feature is unavailable in FAN and DRY mode.

Operating Instructions

OPERATING MODES

Timer Operation

To set the Auto-off timer:

• Ensure the unit is turned on

• Press the TIMER button and the Timer Off indicator light will illuminate

• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns off

To set the Auto-on timer:

• Ensure the unit is turned off

• Press the TIMER button and the Timer On indicator light will illuminate

• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns on

Notes:

• The UP and DOWN buttons will increase or decrease the time in 0.5 hour increments up to 10

hours and then in 1 hour increments up to 24 hours

• The display will revert back to showing the previous temperature setting if the unit does not re-

ceive a signal within a 5 second period during programming

• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 hours will cancel the

Auto-timer settings

Using the Auto-on and Auto-off feature at the same time

You can set the air conditioner to turn on and run for a set period of time and then turn off again by

using the Auto-on and Auto-off features at the same time. Keep in mind that the hours displayed on

the unit refer to the number of hours that will pass from the current time before the action is taken.

For example:

• First, set the Auto-off timer

• Ensure the unit is turned on

• Press the TIMER button and the Timer Off indicator light will illuminate

• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns off

• Press the Timer button again within 5 seconds and the Timer On indicator light will illuminate

• Press the UP and DOWN buttons to select the desired amount of hours before the unit turns back

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DPAC9008 Bedienungsanleitung

Danby

Danby DAC060EB6WDB Bedienungsanleitung

Danby

Danby Premiere DPAC12012P Montageanleitung

Danby

Danby DPAC8511 Montageanleitung

Danby

Danby DPA060B1WDB Bedienungsanleitung

Danby

Danby Premiere DPAC9009 Bedienungsanleitung

Danby

Danby DPA085CB1GDB Montageanleitung

Danby

Danby DAC080EB3GDB Montageanleitung

Danby

Danby Premiere DVAC8071EE Bedienungsanleitung

Danby

Danby DPA140HBACBDB Bedienungsanleitung

Danby

Danby DPA080C2SDB Montageanleitung

Danby

Danby DAC10560DE Bedienungsanleitung

Danby

Danby DAC080B7IWDB-6 Bedienungsanleitung

Danby

Danby Designer DPAC11012 Bedienungsanleitung

Danby

Danby Premiere DAC8075EE Bedienungsanleitung

Danby

Danby DAC080EUB6GDB Montageanleitung

Danby

Danby DPAC10030 Bedienungsanleitung

Danby

Danby DAC050MB2WDB Bedienungsanleitung

Danby

Danby Diplomat DAC5040 Bedienungsanleitung

Danby

Danby DVAC10038E Bedienungsanleitung

Danby

Danby DPA058B6WDB-RF Bedienungsanleitung

Danby

Danby DPAC11012BL Montageanleitung

Danby

Danby DAC150EB2WDB Bedienungsanleitung

Danby

Danby ArcticAire AAC5040 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung