Danby DBSH02213WD13 Bedienungsanleitung
*
*
Danby Products Limited, Guelph, Ontario, Canada N1H 6Z9
Danby Products Inc. Findlay, Ohio, U.S.A. 45840
www.Danby.com
Printed in China
Imprimé en Chine
Impreso en China
*Trademark of Danby Products
* Marque de commerce de Danby Products
* Marca comerciales de Danby Products
2022.08.23
OSCILLATING CERAMIC SPACE HEATER
Owner’s Manual.....................................................1 - 12
CHAUFFE-EAU EN CÉRAMIQUE OSCILLANT
Manuel du propriétaire.........................................13 - 24
CALENTADOR DE ESPACIOS DE CERÁMICA OSCILANTE
Manual del propietario.........................................25 - 36
MODEL •MODÈLE •MODELO
DBSH02213WD13
WARNING: Read and understand this entire owner’s manual,
including all safety information, before plugging in or using this
heater. Failure to do so could result in fire, electric shock or serious
personal injury.
CAUTION: Keep this owner’s manual for future reference.
CAUTION: Risk of electric shock. Do not open or try to repair the
heater yourself.
This heater may get hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. Use handles when moving this heater. Do not
place the heater against walls, furniture, curtains, etc.
Keep combustible materials, such as furniture, pillows, bedding,
paper, clothes and curtains at least 3 feet from the front of the heater
and keep them away from the sides, top and rear. Do not place
towels or other objects on the heater.
Extreme caution is necessary when any heater is used by or near
children or invalids and whenever the heater is left operating and
unattended.
The heater is not intended for use in bathrooms, laundry areas,
showers or swimming pools and similar locations. Never locate the
heater where it may fall into a bathtub or other water container. To
protect against electrical hazards, do not immerse in water or other
liquids.
1
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
Do not touch the control panel or plug with a wet hand.
Always use on a dry, level surface.
Do not use outdoors.
Always use in an upright position.
WARNING: To reduce the risk of fire or electric shock, do not use
this heater with any solid-state speed control devices.
Do not operate any heater with a damaged power cord or after the
heater malfunctions, has been dropped or damaged in any manner.
Return the heater to an authorized service facility for examination,
electrical or mechanical adjustment or repair.
Do not run the power cord under carpeting. Do not cover the power
cord with throw rugs, runners or similar coverings. Arrange the
power cord away from traffic area where it will not be tripped over.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire or
damage to the heater.
To prevent possible fire, do not block the air intakes or exhaust in
any manner. Do not use the heater on soft surfaces like a bed or
thick carpeting where the air intakes may become blocked.
2
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
A heater has hot and arcing or sparking parts inside. Do not use the
heater in areas where gasoline, paint, explosive and/or flammable
liquids are used or stored. Keep the heater away from heated
surfaces and open flames.
Always plug the heater directly into a wall outlet or receptacle.
Never use an extension cord or power strip. To avoid fire or shock
hazard, plug the heater directly into a 120 V AC electrical outlet.
To disconnect the heater, turn the controls to OFF and then remove
the plug from the outlet. Pull firmly on the plug, do not unplug by
pulling on the cord.
Always unplug the heater before moving or cleaning it. Unplug the
heater when it is not in use.
Use only for intended household use as described in this manual.
Any other use not recommended by the manufacturer may cause
fire, electric shock or injury to persons. The use of attachments is not
recommended.
Do not attempt to repair or adjust any electrical or mechanical
functions on this unit. Doing so will void your warranty. The inside of
the heater does not contain any user serviceable parts.
3
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
4
Tip Over Safety Feature
This heater is equipped with a shut-off safety feature. If the heater is
tipped over, an internal switch will automatically shut the heater off.
When the heater is returned to an upright position, the heater will
reset. To continue operation, turn on the heater using the supplied
remote control or the control panel on the heater.
Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the
heater’s internal components reach a certain temperature that could
cause overheating and possible fire, the heater will automatically
shut off.
A thermal overload protector is built in to prevent overheating.
When an “overheat” temperature is reached, the heater will
automatically shut off. Operation can only resume when the user
resets the heater.
To reset the heater, ensure the power is turned off, unplug the unit
and wait 15 to 20 minutes for the internal components to cool down.
Follow the instructions for use to return the heater to normal
functioning.
WARNING: It is normal for the power cord to feel warm to the
touch; however, a loose fit between the outlet and the plug may
cause overheating of the plug. If this occurs, try inserting the plug
into a different outlet. Contact a qualified electrician to inspect the
original outlet for damage.
SAFETY FEATURES
5
OPERATING INSTRUCTIONS
IMPORTANT WARNING
Do not leave this appliance
unattended in a space where
people or animals who cannot
react to a malfunction are
located. A malfunction can
cause extreme overheating
or death in an enclosed,
unattended space.
FEATURES
1. Control panel
2. Air outlet
3. Power switch
4. Handle
5. Air intake
6. Tip over safety switch (on
bottom)
7. Remote control (not pictured)
1
2
3
4
5
6
6
OPERATING INSTRUCTIONS
CONTROL PANEL
CONTROLS FUNCTIONS
ON/OFF button Turns the heater ON or OFF.
Mode button Press to set the mode; high, low
and fan.
Press and hold for 3 seconds to
change the display temperature
between C and F temperature
scales.
Up button Increases the set temperature.
Down button Decreases the set temperature.
Oscillation
button Starts and stops the oscillation
feature.
Timer button Used to set the timer.
7
OPERATING INSTRUCTIONS
DISPLAY INDICATOR LIGHTS
DISPLAY DESCRIPTION
Power
indicator Illuminates when the heater is
receiving power from the power
outlet. Will flash when the heater is
first powered on.
Fan mode
indicator Illuminates when fan mode is in
operation.
High
mode
indicator
Illuminates when high heat mode is
in operation.
Low mode
indicator Illuminates when low heat mode is in
operation.
Oscillation
indicator Illuminates when the oscillation
feature is in operation.
Timer
indicator Illuminates when the timer is in
operation.
8
OPERATING INSTRUCTIONS
REMOTE CONTROL
1. ON/OFF: Used to turn the
heater on or off.
2. Mode button: Used to set the
desired mode; fan, low heat
or high heat.
3. Oscillation button: Used to
start and stop the oscillation
feature.
4. Timer button: Used to set the
timer feature.
5. Up button: Used to increase
the set temperature.
6. Down button: Used to
decrease the set temperature.
REMOTE CONTROL BATTERY
This remote control uses one CR2025
battery.
To remove the battery, push the latch
on the battery compartment upwards
and then pull the battery tray out.
To replace the battery, place the new
battery in the battery tray and push it
gently into the remote control until it
clicks into place.
CR2025
WARNING: Never dispose of
batteries in fire. Failure to observe
this precaution may result in an
explosion. Dispose of batteries
at your local hazardous material
processing center.
If the heater will not be used for a
long time, remove the batteries to
prevent corrosion. Store the remote
control in a safe place.
Keep batteries out of childrens’
reach. Discard them carefully.
Do not allow children to play with
batteries.
Never put button batteries in or near
your mouth for any reason, they
are slippery and easy to swallow
accidentally.
12
34
56
9
INSTRUCTIONS FOR USE
1. Place the heater on a firm, level surface. Only use the heater in
an upright position.
2. Pull out the insulating film from the remote control battery
compartment.
3. Ensure the power is turned off.
4. Plug the heater directly into a 120 V AC electrical outlet.
5. Turn the heater on by pressing the power button.
6. Press the mode button to set the desired mode.
7. Press the up and down arrows to set the desired temperature.
The temperature can be set between 15C - 30C (59F - 86F). The
heater will remain on until the set temperature is reached and it
will then cycle on and off to maintain the set temperature.
8. Turn the heater off by pressing the power button. When the
power is turned off the heating element will stop working
immediately but the fan will continue to run for 30 seconds or
until the heater has cooled.
Important
When the heat feature is used for the first time, a slight odor may be
present. This is normal and should not occur again unless the heater
is not used for an extended period of time.
It is normal for the heater to cycle on and off as it maintains the set
temperature.
For the heater to function properly, the set temperature must be
higher than the ambient temperature in the room. If the heater does
not seem to be heating, increase the set temperature to engage the
heating element.
Press and hold the mode button for 3 seconds to change the display
temperature between C and F temperature scales.
OPERATING INSTRUCTIONS
Inhaltsverzeichnis
Sprachen:
Andere Danby Heizung Handbücher
Beliebte Heizung Handbücher anderer Marken
Empire Heating Systems
Empire Heating Systems WCC65 Bedienungsanleitung
Wetekom
Wetekom 92 86 43 Bedienungsanleitung
Desa
Desa SPC170-F Bedienungsanleitung
Watlow
Watlow Watrod Electric Tubular Heaters Bedienungsanleitung
Haverland
Haverland ECO-DRY GPS Series Stücklistenhandbuch
Stelpro
Stelpro ASILVC2060 Series Bedienungsanleitung