Danby Silhouette DURH301SSSL Bedienungsanleitung

V1.11.11DM

• OWNER’S MANUAL

• GUIDE DU PROPRIÉTAIRE

• MANUAL DEL USARIO

• RANGE HOOD

• HOTTE DE CUISINE

• CAMPANA DE COCINA

CAUTION

PRECAUTION

PRECAUCIÓN

Read and follow all safety rules and operating

instructions before rst use of this product.

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

Lea y observe todas las reglas de seguridad y las

instrucciones de operación antes de usar esto

producto por primera vez.

Model • Modéle • Modelo

DURH301SSSL / DURH361SSSL

Model Number:

Serial Number:

Date of Purchase:

Dealer:

PLEASE STAPLE YOUR SALES RECEIPT TO THE INSIDE FRONT

COVER

DURH301SSSL / DURH361SSSL

TABLE OF CONTENTS

Important Safety Instructions ................................

Ducting...................................................................

Installation..............................................................

Operation ..............................................................

Cleaning and Maintenance ..................................

Lamp replacement ................................................

Troubleshooting ....................................................

Warranty ................................................................

Instrucciones de Seguridad Importantes ...............

Ubicar el Conducto.................................................

Instalción................................................................

Operación...............................................................

Limpieza y Mantenimiento ....................................

Reemplazar la Bombilla.........................................

Resolución de Problemas .....................................

Garantía ...............................................................

ENGLISH

ESPAÑOL

Consignes importantes relatives à la sécurité......

Conduits ...............................................................

Installation ............................................................

Fonctionnement....................................................

Nettoyage et entretien ..........................................

Remplacement de l'ampoule ................................

Dépannage...........................................................

Garantie................................................................

FRANÇAIS

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

FOR DOMESTIC COOKING ONLY

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufac-

turer. If you have questions, contact the manufacturer at the

address or telephone number listed in the warranty.

2. Before servicing or cleaning the unit, switch the power off at

the service panel. Lock and tag the service panel to prevent

power from being switched on accidentally.

3. Installation work and electrical wiring (including switch loca-

tion) must be done by a qualied person(s) in accordance with

all applicable codes and standards.

4. To prevent backdrafting, provide sufcient air for proper

combustion and exhausting of gases through the ue (vent)

of the fuel burning equipment. Follow combustion equipment

standards such as those published by the National Fire Pro-

tection Association (NFPA,) the American Society for Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE,) and

local codes.

5. This product may have sharp edges. Be careful to avoid

cuts and abrasions during installation and cleaning.

6. When cutting or drilling into a wall or ceiling, do not damage

electrical wiring and other hidden utilities.

7. Ducted fans must always be vented to the outdoors.

8. Use only metal ductwork.

9. As an alternative, this product may be installed following

instructions from the designated UL-approved cord kit

10. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended. Rapid boiling causes

smoke and grease spills that may ignite. Heat oils slowly on a

low or medium setting.

2. Always turn hood ON when cooking at high heat or when

ambéing food.

3. Clean the ventilating fans frequently. Do not allow grease to

accumulate on the fan, fan blades and lter.

4. Use the proper pan size. Always use cookware appropriate

for the size of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE

EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE

FOLLOWING:*

1. SMOTHER FLAMES with a close-tting lid, cookie sheet, or

metal tray, then turn off the burner. BE CAREFUL TO AVOID

BURNS. If the ames do not go out immediately, EVACUATE

THE AREA AND CALL THE FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN. You may get burned or

spread the re.

3. DO NOT USE WATER, including wet dishclothes or towels;

a violent steam explosion could result.

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you

already know how to operate it.

B.The re is small and contained in the area where it

started.

C. The re department has already been called.

D. You can ght the re with your back to an exit.

*Based on “Kitchen Fire Safety Tips” published by NFPA.

CAUTION

Installer: Leave this manual with the homeowner.

Homeowner: Cleaning, maintenance, and operating instructions begin on page 3.

1. Read all instructions before using the appliance

2. Install or locate this appliance only in accordance with the

provided installation instructions.

3. Clean Rangehoods Hoods Frequently. Grease should not

be allowed to accumulate on the rangehood or lters.

4. Always turn the fan on when ambéing foods on the range.

5. This appliance is suitable for use in combination with both

gas and electric cooking equipment

6. Use care when cleaning the rangehood lter. Corrosive

cleaning agents, such as lye-based oven cleaners, may dam-

age the lter.

GROUNDING INSTRUCTIONS

1) If it is necessary to use an extension cord, use only a

3-wire extension cord that has a 3-blade electrical plug, and

a 3-slot power outlet that will accept the plug on the

appliance. The marked rating of the extension cord must be

equal to or greater than the electrical rating of the appliance.

Otherwise,

2) Do not use an extension cord. If the power supply cord is

too short, have a qualied electrician or serviceperson install

a power outlet near the appliance.

1. For indoor use only.

2. For general ventilating use only. Do not use to exhaust haz-

ardous or explosive materials and vapors.

3. To best capture cooking impurities, the range hood should

be mounted so that the bottom of the hood is 26”-34” above

the cooking surface.

4. Read the specication label on this product for information

and requirements.

NOTE: These instructions are for ducted installations only.

28"/33"

CENTER LINE

HOOD

MOUNTING

SCREWS

(in cabinet bottom)

CABINET FRONT

DUCTING

Determine whether the hood will discharge vertically or

horizontally. For vertical or horizontal discharge, run ductwork

between the hood location and roof cap or wall cap.

A minimum 6” round duct must be used to maintain maximum

airow efciency.

Always use rigid type metal ducts only.

Whenever possible reduce the number of transitions and turns

in the ductwork. If a long duct run is required increase the duct

size from 6” to 7”.

If elbows or bends are required; install as far away from the

hood as possible.

Minimum mounting height between the range and the bottom

of the hood should be no less than 26”.

Maximum mounting height between the range and the bottom

of the hood should be no more than 34”

WARNING!

FIRE HAZARD

NEVER implement ductwork in a space between walls, crawl

spaces, attics or garages. All exhaust must be vented outside.

Use metal ductwork only. Fasten all connections with sheet

metal screws and certied silver tape or duct tape.

2. Use the following diagram for placement of ductwork and

electrical cutout in cabinet. For a non-ducted installation, DO

NOT cut a duct access hole.

INSTALLATION

The hood is designed for installation under a kitchen

cabinet:

WARNING

To reduce the risk of electrical shock, switch the power off at

the service panel. Lock or tag the service panel to prevent

power from being switched on.accidentally.

1. Remove the mesh lters from the unit

2. Reinforce cabinet with 1” x 2” wood strips if additional

support is required.

26”~34” ABOVE

COOKING SURFACE

DUCT WORK

HOUSE

POWER

CABLE

MOUNTING

SCREWS(4)

7. Securely fasten the hood to the cabinet with the mounting

screws

8. Securely fasten the hood to the wall with the mounting

screws

9. Install the lters

3.Temporarily position the rangehood in its intended place.

Using a pencil measure, mark the mounting holes, duct and

electrical locations.

4. Drill/cut out the required openings for duct and electrical

access; ensure the damper/duct connector enter the ductwork

and the damper opens and closes freely

5. Connect the electical supply wiring (make sure power supply

is off)

6. Leave enough space to apply duct tape to the connection

6" VERTICAL DUCT

KNOCKOUT

LPOWER CABLE

Silhouette Select™ rangehoods include a convenient feature

that allows the range hood to continue to run for an additional

5 minutes to expel residual vapors and odours after cooking.

When the timer button is pressed once the current fan speed

will continue to run for a duration of 5 minutes and the timer

icon appears on the LED display. Push the timer button a

second time to cancel the timer and remove the icon from the

LED display.

Timer

After 100 hours, the lter icon lights up and the user must re-

move the lter, clean it and replace it in order to reset the icon.

Press and hold the power button for 3 seconds to reset after

cleaning the lter.

Filter

The Silhouette Select™ rangehood are equipped with 3 light

settings High, Low and Off. Press the light icon once and the

20w halogen bulbs turn on providing full task lighting. Press

the icon again and this reduces the illumination to 50%. Press

the icon a third time to turn the lights off.

Light

To activate the rangehood, press the power button. Once acti-

vated, the buttons and LED light up.

Power

Your Silhouette Select™ rangehood offers 3 fans settings low,

medium and high. To activate the fan press the fan button and

the fan starts at the low setting and the corresponding icon ap-

pears on the LED display. Press the fan button again and the

blower increases to the medium speed. Press a third time for

the highest speed and a fourth time to turn the fan off.

Fan

Icon for low speed

Icon for medium speed

Icon for high speed

Always turn the hood ON before cooking in order to establish

an air ow in the kitchen. After turning off the range, let the

hood run for a few minutes to clear the air.

OPERATION

1. Make sure the power is off and the bulbs have cooled.

2. Remove the grease lters.

3. Using a small slot screw driver pop off the glass plate.

4. Remove the burnt out 2-pronged 20 watt Halogen bulb.

Replace with a new 20 watt Halogen bulb.

5. Caution: the lights are designed for 20 watt Halogen bulbs

only. Replacing with high wattage bulbs can result in

damage to the rangehood or re and not recommended.

CAUTION: the light bulbs and glass cover become extremely

hot when running. Shut off the lights and allow them to cool

prior to changing the bulb. Failing to do so could result in

serious burns.

REPLACING LIGHT BULBS

The mesh lters are intended to trap residue and grease

from the cooking process. To ensure optimal performance,

appearance, and a sanitary cooking environment, clean the

lters, fan and grease laden surfaces regularly. Use only a

clean cloth and mild detergent solution on stainless steel and

painted surfaces. Do not use corrosive or abrasive cleaning

agents or steel wool or scouring pads as these will scratch

the surface. Do not use cleaning products that use chlorine

bleach or orange cleaners.

The grease lters, bottom panel surrounding the grease lters,

and the blower should be cleaned frequently. When washing

by hand use warm soapy (mild detergent) water. The grease

lter and blower wheels are dishwasher safe.

The motor is permanently lubricated and never needs oiling. If

the motor bearings make unusual or excessive noise, call for

service at 1-800-263-2629.

CLEANING & MAINTENANCE

Heat Sensor:

The hood is equipped with a heat sensing thermostat. If the

safety device detects heat in excess of 158°F (70°C) above

the cooking surface, it will turn on or speed up the fan. If the

fan is not on or running at a low speed, the heat sensor will

override the normal fan control and run the fan on high speed.

When the temperature level drops below 158°F (70°C) the fan

speed will revert back to its original setting.

TROUBLESHOOTING

Issue Cause What to do

After installation, the unit

doesn’t work.

1. The power source is not turned ON.

2. The power line and the cable locking

connector is not connecting properly.

1. Call for service.

2. Call for service.

Light works, but motor is

not turning.

1. The blower is defective, possibly

seized.

2. Damaged capacitor.

1. Call for service.

2. Call for service.

The unit is vibrating. 1. The blower is not secure in place.

2. Damaged blower wheel.

3. The hood is not secured in place.

1. Tighten the blower in place.

2. Change the blower.

3. Check the installation of the hood.

The motor is working,

but the lights are not.

1. Defective halogen bulb. 1. Change the halogen bulb.

The hood is not venting

out properly.

1. The hood might be hanging to high from

the cook top.

2. The wind from the opened windows or

opened doors in the surrounding area

are affecting the ventilation of the hood.

3. Blockage in the duct opening or duct

work.

4. The direction of duct opening is against

the wind.

5. Using the wrong size of ducting.

1. Adjust the distance between the range

and the bottom of the hood to within

26”~34”.

2. Close all windows and doors to eliminate

the outside wind ow.

3. Remove all the blocking from the duct

work or duct opening.

4. Adjust the duct opening direction.

5. Change the ducting to at least 6” or

higher.

Metal lter is vibrating. 1. Spring clip is broken.

2. Metal lter is loose.

1. Verify spring clip is not broken.

2. Replace the metal lter.

LIMITED IN-HOME APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating

conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter

“Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

First 24 Months

During the first twenty four (24) months, any functional parts of this product found to be defective, will be repaired or replaced, at

warrantor’s option, at no charge to the ORIGINAL purchaser.

To obtain

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any appliance

Service

requiring service outside the limited boundaries of “In Home Service” ,it will be the consumer’s responsibility to transport the appliance (at

their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Service” below.

Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service

must be performed by a qualified service technician.

If service is performed on the unit by anyone other than an authorized service depot, or the unit is used for commercial application, all

obligations of Danby under this warranty shall be void.

Boundaries of

If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be

In Home Service

delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certified for

warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are the

responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due

to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its

authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees

under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages

to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of

the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions

(extremely high or low room temperature).

5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.

7) Service calls resulting in customer education.

8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for outdoor application).

Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our

AUTHORIZED SERVICE DEPOT.

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

04/09

1-800-263-2629

Warranty Service

In-home

Consumable parts (ie. light bulbs, filters, glass trays, etc.) are under warranty for thirty (30) days from purchase date, with no extensions provided.