danew DSLIDE 1017 Bedienungsanleitung
USER
GUIDE
Thank you for purchasing a Danew product. Your DSlide Has been designed to
oer you a unique game experience on a touch tablet.
Before using your device, read carefully the use instructions exposed throughout
this manual.
It aims at familiarizing you with the technical features of your DSlide in order to
make its use easier.
NOTE : All information presented in this manual and on the box were current
at the time of printing. However, as we are permanently enhancing our products
through software updates, this manual and the box might not present all the
functions of your actual product.
Pictures are for illustration purpose only and are not contract-binding.
2
3
DSLIDE 1017
INTRODUCTION
GETTING STARTED
INTERNET
P.
P.
P.
Features
Buttons and device parts
P.6
P.7
P.8
P.9
P.11
P.13
P.15
P.16
P.18
P.19
P. 2 0
Switch-on / Switch-o
Lock screen and power saving mode
Home screen and settings
Using the home screen
Sections and shortcuts on the home screen
USB connection
Reset
Using the touch screen
Data storage and file management
Network connections
Wi-Fi configuration
CONTENTS
4
TROUBLESHOOTING
SUPPORT WARRANTY
P.
P.
P. 2 0
P. 2 1
Ethernet connection
Internet research
Internet navigation
Bluetooth
5
INTRODUCTION
Touch capacitive 10.1’’ IPS
1280 x 800 px
RK 3126 Quadcore 1.3GHz
1 GB DDR3
32 GB Flash
Wifi 802.11 b/g /n
2 Mpx / 2 Mpx
5000m Ah Li-polymer
Formats supported by Android™
FM radio tuner
2 x 1 Watt
Ye s
Micro USB OTG function
Micro SDHC card port
3.5 mm audio output jack
240.8 x 167.5 x 8.7 mm
524 g
Screen
Resolution
Processor
RAM
Internal memory
Network
Camera / Webcam
Battery
Multimedia
Speaker
G-sensor
Connectors
Dimensions
Weight
FEATURES
6
Micro SD Port
7
BUTTONS PARTS OF THE DEVICE
3.5 Audio Jack
ON/
OFF
Micro USB
Microphone
Volume
+/ -
Speaker Speaker
Webcam
Camera
8
GETTING STARTED
1
2
Long pressing the ON/OFF button (3 seconds) will start your DSlide. The screen
plays an animation of Danew’s logo before loading the Android interface.
To switch o your DSlide, press the ON/OFF button (for approximately 3
seconds), screen switched on, the following screen (Fig 1) will appear :
When the battery is low, the device will automatically shutdown to save power.
Switch-on
Switch-o
9
3A) Lock screen
When the device is on, short pressing the ON/OFF button will switch-o the
screen and enable the power saving mode or lock (after a period of inactivity, the
screen will automatically shutdown).
When this mode is enabled, the applications in use will not be closed.
The Wifi connection is automatically stopped in standby mode. It will
automatically be restored when you leave the screen saver.
Pressing again the ON/OFF button will display the lock screen. To unlock the
DSlide, slide your finger upwards.
Lock screen & power saving mode
10
B) Power saving
To optimize your tablet’s battery life, we recommend to follow the following tips :
•Screen
Do not use a 100% luminosity. The screen of your tablet is an energy consuming part
(when it is switched on).
In most cases, a 50% luminosity allows a suciently comfortable operation. To
change the luminosity, go to the point 6 of this manual.
To optimize the battery, it is also recommended to set the automatic standby mode
(in the case of inactivity). The shorter this period is, the better your battery life. To set
the standby period, go to the « Settings/Display/Sleep » menu.
•WiFi
The wifi connection is also an energy consuming part of your device. To optimize
your battery life, it is recommended to disable the Wifi connection when it is not
being used. For example, when your are watching a video of playing sound on your
tablet, you should disable the Wifi connection, you will then save up to 30% of your
battery life.
Click here to
enable/disable the
Wifi connection
Inhaltsverzeichnis
Andere danew Tablette Handbücher
