DanForce BOLD-S HEADLAMP Bedienungsanleitung
BOLD-s
HEADLAMP
2018 User Manual
LIGHT
YOUR WAY
TABLE OF CONTENTS
1
2
3
4
A. Package Includes
B. Your DanForce Bold-s
C. Batteries
D. Charging the batteries
E. Adjusting the Headlamp 5
6
7
F. Light Modes
G. Focus System
H. Warning 8
1
A. Package include
1. Bold-sHeadlamp
2. X2 18650 Rechargeable lithium-ion Batteries
3. USB cable
4. Carry Bag
5. Carabiner
1. Main LED
2. Secondary LEDs
3. Main Buon
4. Focus
5. Baery case
6. Upper Strap
7. Side Strap
8. Headlamp Forehead
9. Strap Adjuster
B. Your Bold-s
2
9
2
3
4
5
7
6
1
8
To use the Bold-pro with the best performance, use only MSFORCE
batteries. Use only 18650 3.7v lithium-ion batteries.
Prior to rst use fully charge the baeries.
Rechargeable Baeries specs:
Model: MsForce 18650 Li-ion battery
Capacity: 2200 mAh
Voltage: 3.7 V
3
C. Baeries
FULLY CHARGE BATTERIES BEFORE FIRST USE.
Inial baery charge may take up to 7 hours.
Subsequent baery charge me will take
5 to 7 hours.
D. Charging the baeries
4
Blinking blue light - Charging
Steady blue light - Done charging
• Remove all baery packaging
• Open the baery pack located on the back
of the headlamp , insert the baeries and
close the silicon cover.
• Open the charging port on the pack and connect
the charging cable
• Connect the cable’s end into an electrical outlet /PC/ Power Bank/Bank/Other
electronic power source USB slot. Input: 1A / 2A
• Place the headlamp strap snugly on your head
so that the headlamp unit is centered on your forehead; and the baery pack is
centered at the back of your head, above your ears.
• Adjust the tension of the strap by moving the strap
adjuster
• The headlamp light angle can be easily
adjusted by rotang the headlamp
unit up or down; the full range of moon
is 90 degrees.
E. Adjusng the Headlamp
5
6
Locate the buon on the top of the headlamp
Press the buon the following numbers of
mes to access the 5 white LED modes:
1. Main LED
2. Secondary LEDs
3. ALL LEDs
4. Strobe
5. OFF
F. Light Modes
Red LED:
To access red light from white LED modes \ OFF , Click on
main button for 3 sec.
Red Lights has 1 light modes:
7
G. Focus system
• Locate the rims at the front edges
of each of the LED lamps
• Rotate the rim(s) clockwise to focus
the light beam(s)
• Rotate the rim(s) counterclockwise to
diuse the light beam(s)
8
G.WARNING
Inhaltsverzeichnis
Andere DanForce Scheinwerfer Handbücher
