Danfoss AMV 110 NL AQT Bedienungsanleitung

VD.LE.A6.02 © Danfoss 01/2014

DEN-SMT/SI

Actuators for three point control

AMV 110 NL, AMV 120 NL

Data sheet

Description The actuators are used together with

automatically balanced combination valve type

AB-QM for DN 10 to DN 32.

Typical applications for that products are:

temperature control and permanent automatic

balancing on terminal units (fan-coils, chilled

ceilings, air-handling units..).

Main data:

• Gap detection at stem up position

•3 point version

•Force switch-oﬀ at stem down position

prevents overload of actuator and valve

•No tools required for mounting

•Maintenance-free lifetime

•Low-noise operation

•Halogen free cables

Ordering Actuators

Type Supply voltage Speed Cable length Code No,

(V) (s/mm) (m) Single Pack Industry Pack

AMV 110 NL

24 AC

1,5 082H8056 /

5,0 082H8080 082H8076

10 082H8090 082H8086

AMV 120 NL 12

1,5 082H8058 /

5,0 / 082H8078

10 /082H8088

Note:

Actuators with 5 m and 10 m cable length are produced on request. Please note this increases lead time.

Spare parts

Type Length

(m) Code No.

Cable (24 V) 5082H8052

10 082H8054

2VD.LE.A6.02 © Danfoss 01/2014

DEN-SMT/SI



Data sheet Actuators for three point control AMV 110 NL, AMV 120 NL

Installation Mechanical

The actuator should be mounted with the valve

stem in either horizontal position or pointing

upwards.

The actuator is ﬁxed to the valve body by means

of a mounting ring, which requires no tools for

mounting. The ring should be tightened by hand.

Electrical

Important: It is strongly recommended that the

mechanical installation is completed before the

electrical installation.

Each actuator is supplied with the connecting

cable for the controller.

Disposal The actuator must be dismantled and the

elements sorted into various material groups

before disposal.

Technical data

Type AMV 110 NL AMV 120 NL

Power supply V 24 AC, +10 to –15 %

Power consumption running VA 1

standby W 0

Frequency Hz 50 Hz/60 Hz

Close of force N 130

Stroke mm 5

Speed s/mm 24 12

Relative humidity max. 80 %

Max. medium temperature

°C

120

Ambient temperature 0 … 55

Storage and transport temperature –40 … 70

Protection class III safety extra-low voltage

Grade of enclosure IP 42

Weight kg 0,3

- marking in accordance with

standards

Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14

EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3

Wiring

VD.LE.A6.02 © Danfoss 01/2014

DEN-SMT/SI

position

indicator

⑤

①

②

③④

Data sheet Actuators for three point control AMV 110 NL, AMV 120 NL

Commissioning The factory setting of the spindle is the fully

stem up position because of easier mechanical

connection of the actuator on the valve.

1. Check the valve neck. The actuator should be

in stem up position (factory setting). Ensure

that the actuator is mounted securely on the

valve body

2. Wire the actuator according to the

wiring diagram

3. The direction of the stem movement can be

observed on the position indicator

Installation and

commissioning procedure

(if required)

Do not touch anything on

the PCB!

Do not remove the cover

before the power supply is fully

switched oﬀ.

Manual override

(for service purposes only)

Caution:

Do not manually operate the

drive if power is connected!

Do not dismount the actuator

from the valve when it is in a

stem down position!

If dismounted in a stem down

position, there is a high risk that

the actuator gets stuck.

• Removecover①

• Pressandholdthebutton②(on the

bottom side of the actuator) during manual

override ③

• Replacecover④

• Installactuatoronvalve⑤

Remark:

A ‘click’ sound after energising the actuator

indicates that the gear wheel has jumped into

normal position.

VD.LE.A6.02

Produced by Danfoss A/S © 01/2014

Data sheet Actuators for three point control AMV 110 NL, AMV 120 NL

Dimensions (mm)

Andere Handbücher für AMV 110 NL AQT

Dieses Handbuch passt für folgende Modelle

Andere Danfoss Controller Handbücher

Danfoss

Danfoss AK-CC 550 Bedienungsanleitung

Danfoss

Danfoss MCD3000 Series Bedienungsanleitung

Danfoss

Danfoss AME 25 Bedienungsanleitung

Danfoss

Danfoss ERC 211 Bedienungsanleitung

Danfoss

Danfoss KP 15A Bedienungsanleitung

Danfoss

Danfoss VLT AutomationDrive FC 360 Betriebsanleitung

Danfoss

Danfoss VLT Decentral FCD 300 Bedienungsanleitung

Danfoss

Danfoss AME 438 SU Bedienungsanleitung

Danfoss

Danfoss AME 610 Bedienungsanleitung

Danfoss

Danfoss AK2-SC 255 Bedienungsanleitung

Danfoss

Danfoss AK-CH 650 Bedienungsanleitung

Danfoss

Danfoss VLT HVAC Drive FC 102 Bedienungsanleitung

Danfoss

Danfoss AK-CC 250A Bedienungsanleitung

Danfoss

Danfoss AVQM Series Bedienungsanleitung

Danfoss

Danfoss VLT Micro Drive FC 51 Series Betriebsanleitung

Danfoss

Danfoss Link HC Bedienungsanleitung

Danfoss

Danfoss ERC 213 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss 176F7300 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310 Bedienungsanleitung

Danfoss

Danfoss AME 55QM Bedienungsanleitung

Danfoss

Danfoss A376 Series Installationsanleitung

Danfoss

Danfoss MCD 500 Series Bedienungsanleitung

Danfoss

Danfoss Saginomiya RGE-Z3R2-7 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung