Danfoss ECL Comfort 310 Bedienungsanleitung
Installation Guide
Connection of ECL Comfort 310 controller to wireless network (WLAN)
1
Danfoss District Energy VI.HX.D1.02 DEN-SMT/DK
1.0 Contents .................................................................................................................................................................................................................................1
2.0 Introduction ..........................................................................................................................................................................................................................2
2.1 Use the ECL Comfort 310 in SCADA systems via WLAN .......................................................................................................................................2
2.2 What is a wireless brigde? ...............................................................................................................................................................................................2
3.0 System overview ..................................................................................................................................................................................................................2
3.1 Components........................................................................................................................................................................................................................2
3.2 Wireless internet router....................................................................................................................................................................................................3
3.3 Wireless bridge....................................................................................................................................................................................................................3
3.4 Congure the wireless bridge .......................................................................................................................................................................................3
3.5 Select wireless network to be used for wireless bridge .......................................................................................................................................4
3.6 Congure ECL Comfort 310 controller to local network......................................................................................................................................4
1.0 Contents
Installation Guide ECL 310 Comfort to WLAN
2
DEN-SMT/DK VI.HX.D1.02 Danfoss District Energy
2.0 Introduction
2.1 Use the ECL Comfort 310 in SCADA systems via WLAN
The ECL Comfort 310 controller has a built-in ethernet interface which
enables it to connect to the local network (LAN) via a standard
ethernet cable.
By connecting the ECL Comfort 310 to the local network and/or the
internet the ECL Comfort 310 can be used in SCADA systems like the
Danfoss ECL Portal.
In some installations it may be prefered to use wireless network
(WLAN) instead. In such cases the ECL Comfort 310 can easily connect
to a wireless network by using a wireless bridge.
2.2 What is a wireless brigde?
The function of the wireless bridge is to be a bridge between a
wireless network (WLAN) and an ethernet network (LAN).
By using a wireless bridge a device like the ECL Comfort 310 can
connect to the wireless network and/or the internet using its
standard ethernet interface.
3.0 System overview
3.1 Components
The components of interest are shown in the picture below.
A new or existing wireless internet connection (WLAN) is made
available by the wireless internet router in the building.
A wireless bridge is added to the heating installation and the ECL
Comfort 310 is connected to the wireless bridge using a standard
ethernet cable.
Wireless internet router Wireless bridge ECL Comfort 310
(Netgear WN3000RP)
Installation Guide ECL 310 Comfort to WLAN
33
3.2 Wireless internet router
This is a standard wireless internet router which may already be avail-
able in the building providing a wireless internet connection.
To connect to the wireless internet the name of the wireless network
(SSID) and the password must be known.
3.3 Wireless bridge
The wireless bridge is the extra electronic device needed to make the
ECL Comfort 310 able to connect to the wireless internet connection.
Several wireless bridges are available on the market, but the one
from Netgear (type WN3000RP) shown in the picture is very simple
to install and congure.
The wireless bridge is inserted into the mains plug and a standard
network cable is connected from the side of the wireless bridge to
the ECL Comfort 310 ethernet connection.
Netgear (type WN3000RP).
3.4 Congure the wireless bridge
Prior to connecting the wireless bridge to the ECL Comfort 310 it
has to be congured by following the Netgear wizard.
The Netgear wizard is accessed by connecting a computer to the
ethernet connector of the wireless bridge, opening an internet
browser and entering www.mywiext.net in the address eld.
Select the wireless network to be used by the ECL Comfort 310 in
the Netgear Wizard.
Danfoss District Energy VI.HX.D1.02 DEN-SMT/DK
Installation Guide ECL 310 Comfort to WLAN
4
DEN-SMT/DK VI.HX.D1.02 Danfoss District Energy
3.5 Select wireless network to be used for wireless bridge
The Netgear wizard asks for wireless network to be used by the wire-
less bridge. Select the wireless network.
The Netgear wizard now asks for the password to the selected wire-
less network. Enter the password.
The wireless bridge is then completing the conguration and the
ethernet connection on the side of the wireless bridge can now be
connected to the ECL Comfort 310.
Enter passphrase for the selected wireless network.
3.6 Congure ECL Comfort 310 controller to local network
The ECL Comfort 310 controller must be congured to connect to
the local network (LAN).
If the ECL Portal is used as SCADA system then the ECL Com-
fort 310 must be congured for DHCP instead of STATIC in the
System>Ethernet menu and the ECL Portal feature must be ena-
bled in the System>Portal Cong menu.
If used with ECL Portal: Congure for DHCP.
Enable the ECL Portal in the Portal Cong menu.
Installation Guide ECL 310 Comfort to WLAN
55
Danfoss District Energy VI.HX.D1.02 DEN-SMT/DK
Installation Guide ECL 310 Comfort to WLAN
6
DEN-SMT/DK VI.HX.D1.02 Danfoss District Energy
Installation Guide ECL 310 Comfort to WLAN
77
Danfoss District Energy VI.HX.D1.02 DEN-SMT/DK
Installation Guide ECL 310 Comfort to WLAN
Produced by Danfoss A/S © 12/2012
*087H9125*
*VIHXD102*
Andere Handbücher für ECL Comfort 310
20
Inhaltsverzeichnis
Andere Danfoss Controller Handbücher
Danfoss
Danfoss PVE 7 Series Handbuch
Danfoss
Danfoss vlt soft starter mcd 500 Bedienungsanleitung
Danfoss
Danfoss VLT5000 SyncPos Bedienungsanleitung
Danfoss
Danfoss ADAP-KOOL AK-CC 750 Bedienungsanleitung
Danfoss
Danfoss ERC 113 Bedienungsanleitung
Danfoss
Danfoss Optyma Plus OP-MPS Bedienungsanleitung
Danfoss
Danfoss ERC 213 Bedienungsanleitung
Danfoss
Danfoss AFQM 2 Bedienungsanleitung
Danfoss
Danfoss AME 110 NLX Bedienungsanleitung
Danfoss
Danfoss EKC 202D Bedienungsanleitung
Danfoss
Danfoss AME 855 Bedienungsanleitung
Danfoss
Danfoss AVPA Bedienungsanleitung
Danfoss
Danfoss VLT Decentral FCD 300 Bedienungsanleitung
Danfoss
Danfoss AK-CC 460 Bedienungsanleitung
Danfoss
Danfoss VLT HVAC Bedienungsanleitung
Danfoss
Danfoss 101N0715 Bedienungsanleitung
Danfoss
Danfoss VLT Center Winder MCO 352 Bedienungsanleitung
Danfoss
Danfoss ADAP-KOOL AK-PC 781 Bedienungsanleitung
Danfoss
Danfoss VLT HVAC Bedienungsanleitung
Danfoss
Danfoss AMV 110 NL AQT Bedienungsanleitung
