Danfoss VLT AutomationDrive FC 302 Bedienungsanleitung

MAKING MODERN LIVING POSSIBLE

Operating Instructions

VLT®AutomationDrive FC 302 Low Harmonic Drive

132-630 kW

www.danfoss.com/drives

Contents

1 Safety 4

1.1 Safety 4

2 Introduction 5

2.1 Exploded View Drawings 5

2.2 Purpose of the Manual 13

2.3 Approvals 13

2.3.1 Approvals 13

2.4 Additional Resources 13

2.5 Product Overview 13

2.6 Internal Equipment Functions 14

2.6.1 Working Principle 14

2.6.2 IEEE519 Compliance 14

3 Installation 15

3.1 Installation Site Checklist 15

3.2 Equipment Pre-Installation Checklist 15

3.3 Mechanical Installation 15

3.3.1 Cooling and Airflow 15

3.3.2 Lifting 17

3.3.3 Terminal Locations for Frame Size D13 18

3.3.4 Terminal Locations for Frame Size E9 19

3.3.5 Terminal Locations - Frame Size F18 20

3.3.6 Torque 23

3.4 Electrical Installation 23

3.4.1 EMC Interference 25

3.4.2 Extra Protection (RCD) 26

3.4.3 RFI Switch 26

3.4.4 Shielded Cables 26

3.4.5 Motor Cable 26

3.4.6 Brake Cable 27

3.4.7 Brake Resistor Temperature Switch 27

3.4.8 Mains Connection 27

3.4.9 External Fan Supply 27

3.4.10 Power and Control Wiring for Unscreened Cables 28

3.4.11 Mains Disconnects 29

3.4.12 F-Frame Circuit Breakers 29

3.4.13 F-Frame Mains Contactors 29

3.4.14 Motor Insulation 29

3.4.15 Motor Bearing Currents 29

Contents Operating Instructions

3.4.16 Motor Thermal Protection 30

3.4.17 Control Cable Routing 30

3.4.18 Access to Control Terminals 31

3.4.19 Electrical Installation, Control Terminals 31

3.4.20 Electrical Installation, Control Cables 33

3.4.21 Switches S201, S202, and S801 34

3.4.22 Serial Communication 34

3.5 Final Set-up and Test 34

3.6 Additional Connections 35

3.6.1 Mechanical Brake Control 35

3.6.2 Parallel Connection of Motors 35

3.6.3 F-frame Options 36

4 Start Up and Functional Testing 38

4.1 Pre-start 38

4.2 Applying Power to the Equipment 39

4.3 Basic Operational Programming 39

4.4 Local Control Test 40

4.5 System Start Up 41

5 User Interface 42

5.1 How to Operate 42

5.1.1 Modes of Operation 42

5.1.2 How to Operate Graphical LCP (GLCP) 42

5.1.3 Changing Data 45

5.1.4 Changing a Text Value 46

5.1.5 Changing a Group of Numeric Data Values 46

5.1.6 Changing of Data Value, Step-by-Step 46

5.1.7 Read-out and Programming of Indexed Parameters 46

5.1.8 Quick Transfer of Parameter Settings with the LCP 46

5.1.9 Initialisation to Default Settings 47

5.1.10 RS-485 Bus Connection 47

5.1.11 Connection to a PC 47

5.1.12 PC Software Tools 48

6 Programming 49

6.1 How to Programme the Frequency Converter 49

6.1.1 Quick Setup Parameters 49

6.1.2 Basic Setup Parameters 51

6.2 How to Programme the Active Filter 71

6.2.1 Using the Low Harmonic Drive in NPN Mode 72

Contents Operating Instructions

6.3 Parameter Lists - Frequency Converter 72

6.3.1 Parameter Selection 73

6.4 Parameter Lists - Active Filter 106

7 Application Examples 112

7.1 Introduction 112

7.2 Application Examples 112

7.3 Connection Examples for Control of Motor with External Signal Provider 117

7.3.1 Start/Stop 117

7.3.2 Pulse Start/Stop 117

7.3.3 Speed Up/Down 117

7.3.4 Potentiometer Reference 118

8 Status Messages 119

8.1 Status Display 119

8.2 Status Message Definitions 119

9 Warnings and Alarms 122

9.1 System Monitoring 122

9.2 Warning and Alarm Types 122

9.2.1 Warnings 122

9.2.2 Alarm Trip 122

9.2.3 Alarm Trip-lock 122

9.3 Warning and Alarm Displays 122

9.4 Warnings and Alarm Definitions - Frequency Converter 123

9.5 Active Filter Warning and Alarm Definitions 131

10 Basic Start-up Troubleshooting 136

11 Specifications 139

11.1 Power-Dependent Specifications 139

11.1.1 Mains Supply 3x380-480 V AC 139

11.1.2 Derating for Temperature 142

11.2 Mechanical Dimensions 143

11.3 General Technical Data - Frequency Converter 145

11.4 General Technical Data - Filter 149

11.5 Fuses 153

11.5.1 Non UL compliance 153

11.5.2 Fuse Tables 154

11.5.3 Supplementary Fuses - High Power 154

11.6 General Torque Tightening Values 155

Index 157

Contents Operating Instructions

1 Safety

1.1 Safety

WARNING

HIGH VOLTAGE

Frequency converters contain high voltage when

connected to AC mains input power. Qualified personnel

only should perform installation, start up, and

maintenance. Failure to perform installation, start up,

and maintenance by qualified personnel could result in

death or serious injury.

WARNING

UNINTENDED START

When the frequency converter is connected to AC mains,

the motor may start at any time. The frequency

converter, motor, and any driven equipment must be in

operational readiness. Failure to be in operational

readiness when the frequency converter is connected to

AC mains could result in death, serious injury,

equipment, or property damage.

WARNING

DISCHARGE TIME

Frequency converters contain DC-link capacitors that can

remain charged even when the frequency converter is

not powered. To avoid electrical hazards, disconnect AC

mains, any permanent magnet type motors, and any

remote DC-link power supplies, including battery back-

ups, UPS, and DC-link connections to other frequency

converters. Wait for the capacitors to fully discharge

before performing any service or repair work. The

amount of wait time is listed in the Discharge Time table.

Failure to wait the specified time after power has been

removed before doing service or repair could result in

death or serious injury.

Voltage [V] Power range [kW] Minimum waiting time

(minutes)

380-500 160-250 kW* 20

315-710 kW 40

Table 1.1 Discharge Times

*Power ranges are for normal overload operation.

Safety Operating Instructions

2 Introduction

2.1 Exploded View Drawings

130BX167.10

19 13

1 Control card 14 SCR/diode module

2 Control input terminals 15 IGBT output bus bar

3 Local control panel (LCP) 16 Output motor terminals

4 Control card C option 17 Current sensor

5 Mounting bracket 18 Fan assembly

6 Power card mounting plate 19 Fan transformer

7 Power card 20 AC input terminals

8 Capacitor bank assembly 21 AC input bus bar

9 Soft charge fuses 22 Input terminal mounting plate assembly

10 Soft charge card 23 Fan fuse

11 DC inductor 24 Capacitor bank cover plate

12 Soft charge module 25 IGBT gate drive card

13 IGBT module

Illustration 2.1 Frame Size D13 Drive Enclosure

Introduction Operating Instructions

130BD571.11

1 Local control panel (LCP) 13 Mains fuses

2 Active filter card (AFC) 14 Mains disconnect

3 Metal oxide varistor (MOV) 15 Mains terminals

4 Soft charge resistors 16 Heat sink fan

5 AC capacitors discharge board 17 DC capacitor bank

6 Mains contactor 18 Current transformer

7 LC inductor 19 RFI differential mode filter

8 AC capacitors 20 RFI common mode filter

9 Mains bus bars to drive input 21 HI inductor

10 IGBT fuses 22 Power card

11 RFI

Illustration 2.2 Frame Size D13 Filter Enclosure

Introduction Operating Instructions

130BX168.10

19 18

1 Control card 14 SCR and diode

2 Control input terminals 15 Fan inductor (not on all units)

3 Local control panel (LCP) 16 Soft charge resistor assembly

4 Control card C option 17 IGBT output bus bar

5 Mounting bracket 18 Fan assembly

6 Power card mounting plate 19 Output motor terminals

7 Power card 20 Current sensor

8 IGBT gate drive card 21 Mains AC power input terminals

9 Upper capacitor bank assembly 22 Input terminal mounting plate

10 Soft charge fuses 23 AC input bus bar

11 DC inductor 24 Soft charge card

12 Fan transformer 25 Lower capacitor bank assembly

13 IGBT module

Illustration 2.3 Frame Size E9 Drive Enclosure

Introduction Operating Instructions

130BD572.11

1 Local control panel (LCP) 12 AC capacitor current transducers

2 Active filter card (AFC) 13 Heat sink fan

3 Mains contactors 14 Mains terminals

4 Soft charge resistors 15 Mains disconnect

5 RFI differential mode filter 16 Mains fuses

6 RFI common mode filter 17 LC inductor

7 Current transformer (CT) 18 HI inductor

8 Mains bus bars to drive output 19 Power card

9 AC capacitors 20 Control card

10 RFI 21 LCP cradle

11 Lower DC capacitor bank

Illustration 2.4 Frame Size E9 Filter Enclosure

Introduction Operating Instructions

Andere Handbücher für VLT AutomationDrive FC 302

Inhaltsverzeichnis

Andere Danfoss Controller Handbücher

Danfoss

Danfoss Old ICAD 600 series Bedienungsanleitung

Danfoss

Danfoss EKC 223 Bedienungsanleitung

Danfoss

Danfoss MCD Series Bedienungsanleitung

Danfoss

Danfoss AK-PC 781A Bedienungsanleitung

Danfoss

Danfoss AME 13 SU-1 Bedienungsanleitung

Danfoss

Danfoss A376 Series Installationsanleitung

Danfoss

Danfoss VLT HVAC Drive FC 102 Bedienungsanleitung

Danfoss

Danfoss MCI 50-3 I-O Bedienungsanleitung

Danfoss

Danfoss Old ICAD 600 series Bedienungsanleitung

Danfoss

Danfoss VLT MCD 201 Bedienungsanleitung

Danfoss

Danfoss AME 410 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss vlt soft starter mcd 500 Bedienungsanleitung

Danfoss

Danfoss VLT HVAC Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 110 Bedienungsanleitung

Danfoss

Danfoss FCM305 56 Bedienungsanleitung

Danfoss

Danfoss AVPL 1.0 Bedienungsanleitung

Danfoss

Danfoss EKC 202A Bedienungsanleitung

Danfoss

Danfoss AMV 610 Bedienungsanleitung

Danfoss

Danfoss ADAP-KOOL AK-PC 572 Bedienungsanleitung

Danfoss

Danfoss MCV104A Bedienungsanleitung

Danfoss

Danfoss AK-PC 530 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 100M Bedienungsanleitung

Danfoss

Danfoss MCO 351 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung