Danfoss G 4500 Bedienungsanleitung

Installation Guide

How to apply Molycote G 4500 grease

for ICM motor operated valves

© Danfoss A/S (MWA), 2021-01 AN149686416719en-000401 | 1

027R9787

027R9787

Apply the molycote G4500 grease

(supplied with ICAD) to the O-ring

grove on the ICM adapter and

O-ring. Then install the greased

O-ring into the groove on the ICM

adapter as shown in the picture.

Apply another layer of grease over the O-ring

as shown in the picture.

Remove the O-ring on the ICM adapter with

your ﬁngers. Do not use any tool because it

could damage the O-ring.

For ICM in service

If there is any ice or moisture present,

it must be removed prior to applying

the grease. The ice can be melted with

an electric heater or hair dryer.

O-ring

Info for UK customers only:Danfoss Ltd. Oxford Road, UB9 4LH Denham, UK

2 | AN149686416719en-000401 © Danfoss A/S (MWA), 2021-01

Move down

to stop

Close ICM by turning the multi-function

tool counter-clockwise, until it cannot be

tightened further.

Open ICM by turning the multi-function tool

appox. 1 turn clockwise.

Install the ICAD actuator on the ICM adapter

making sure it is pushed completely down.

Fasten the set screws using a 2.5 mm hexagon

key

Set screws

For ICAD already electrical connected

to control system.

Program ICAD to manual mode.

(i01=2).

Install the ICAD actuator on the ICM

adapter making sure it is pushed

completely down. Fasten the set

screws using a 2.5 mm hexagon key.

Program ICAD to calibrate to the

actual ICM valve - i10 (password)

and i26 (selection of ICM size).

Await calibration to ﬁnish.

Return ICAD to normal operation.

(i01=1)

Inhaltsverzeichnis

Andere Danfoss Motor Handbücher

Danfoss

Danfoss K Frame Series Bedienungsanleitung

Danfoss

Danfoss EM-PMI540-1500 Bedienungsanleitung

Danfoss

Danfoss H1B 160 cc Bedienungsanleitung

Danfoss

Danfoss H1B 060 Bedienungsanleitung

Danfoss

Danfoss FCM 300 Series Technisches Datenblatt

Danfoss

Danfoss VLT DriveMotor FCP 106 Bedienungsanleitung

Danfoss

Danfoss EM-PMI240 Bedienungsanleitung

Danfoss

Danfoss HG7 Bedienungsanleitung

Danfoss

Danfoss H1 Series Handbuch

Danfoss

Danfoss H1B060 Bedienungsanleitung

Danfoss

Danfoss EM-PMI540-T4000 Bedienungsanleitung

Danfoss

Danfoss EM-PME375 Series Bedienungsanleitung

Danfoss

Danfoss VLT OneGearDrive Bedienungsanleitung

Danfoss

Danfoss EM-PMI300-T310 Bedienungsanleitung

Danfoss

Danfoss EM-PMI300-T310 Bedienungsanleitung

Danfoss

Danfoss EM-PMI540-T1500 Bedienungsanleitung

Danfoss

Danfoss EM-PMI375-T200 Bedienungsanleitung

Danfoss

Danfoss EM-PMI540-T2000 Bedienungsanleitung

Danfoss

Danfoss VLT OneGearDrive Bedienungsanleitung

Danfoss

Danfoss MAH Series Bedienungsanleitung

Danfoss

Danfoss TMTHW Series Handbuch

Danfoss

Danfoss OMM EM Bedienungsanleitung

Danfoss

Danfoss VLT OneGearDrive ExtensionBox Bedienungsanleitung

Danfoss

Danfoss TMM 070 Bedienungsanleitung

Beliebte Motor Handbücher anderer Marken

Rotax

Rotax 125 senior MAX evo Bedienungsanleitung

Kohler

Kohler K361 Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

Kohler

Kohler COMMAND CH18-745 Bedienungsanleitung

Mercury

Mercury D4.2L D-Tronic Bedienungsanleitung

Selve

Selve SE Plus-RC Series Bedienungsanleitung

Perkins

Perkins 1206E-E66TA Bedienungsanleitung

Skov

Skov DA 174 Handbuch

Rossi

Rossi TX11 Series Bedienungsanleitung

Siemens

Siemens SIMOTICS T-1FW3 Merkblatt

AL-KO

AL-KO PRO 350 Bedienungsanleitung

MTU

MTU 12 V 4000 Lx4 Bedienungsanleitung

Nanni

Nanni N3.30 Gebrauchsanweisung

Nanni

Nanni N5.160 CR2 Bedienungsanleitung

KSB

KSB SuPreme Series Montageanleitung

Hiwin

Hiwin EM1 Series Bedienungsanleitung

Rotax

Rotax 912 i series Betriebsanleitung

Siemens

Siemens SIMOTICS XP 1MB1 Bedienungsanleitung