DANIEL 2500 Montageanleitung

MODEL 2500

INSTRUMENTATION

SYSTEM

__________________________________________

USER REFERENCE MANUAL

DANIEL MEASUREMENT AND CONTROL

HOUSTON, TEXAS

Part Number: 3-9000-591

Revision 5 Series

Revision H

NOVEMBER 1998

Year 2000 Warranty

The Company represents and warrants that computer programs in any medium, software,

firmware and combinations thereof (“Deliverables”) manufactured by the Company and

incorporated into or supplied by the Company for use with goods manufactured by the Company

will, under normal use and care:

i) recognize and accept dates falling on or after 1 January 2000;

ii) recognize and accept the year 2000 and every succeeding fourth year as leap

years;

iii) recognize and accept 29 February in the year 2000 and every succeeding fourth

year;

iv) record, store, process, sequence, present and output calendar dates and data related

to dates falling on or after 1 January 2000, in the same manner and with the same

functionality as they do on or before 31 December 1999 and without errors or

omissions; and

v) lose no functionality with respect to the introduction into them of dates or data

related to dates falling on or after 1 January 2000;

provided that, in the case of any non-conforming Deliverables that are returned to the Company

promptly following discovery of the non-conformity, the Company will, at its option and cost,

repair or replace such Deliverable or refund to the Purchaser the purchase price therefor. This

shall be the Purchaser's sole and exclusive remedy for breach of the foregoing warranty.

Notwithstanding the foregoing, the Company shall not, under any circumstances whatsoever, be

liable for any defects or errors caused by: materials or workmanship made, furnished or specified

by the Purchaser; non-compliance with the Company's installation or operation requirements;

failure to install any revisions and/or upgrades to the Deliverables deemed mandatory by the

Company; any modifications to Deliverables not previously authorized by the Company in

writing; the use by the Purchaser of any non-authorized spare or replacement parts in connection

with the goods used in conjunction with the Deliverables; or the use of the Deliverables with any

hardware or software not supplied by the Company. The Purchaser shall at all times remain

solely responsible for the adequacy and accuracy of all information supplied by it. Any third

party content in Deliverables shall carry only the warranty extended by the original manufacturer.

THE FOREGOING CONSTITUTES THE COMPANY'S SOLE AND EXCLUSIVE

WARRANTY IN RELATION TO THE PERFORMANCE OF THE DELIVERABLES AS IT

RELATES TO THE CHANGE FROM YEAR 1999 TO YEAR 2000 OR THE OCCURRENCE

OF LEAP YEARS THEREAFTER, AND THE PURCHASER'S EXCLUSIVE REMEDY FOR

BREACH THEREOF. IN NO EVENT WILL THE COMPANY BE LIABLE FOR INDIRECT,

CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING LOSS OF USE,

BUSINESS INTERRUPTION OR LOSS OF PROFITS, IRRESPECTIVE OF WHETHER THE

COMPANY HAD NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

The foregoing warranty shall remain valid until the later of December 31, 2000 or one year after

the date that the Deliverable was shipped.

MODELMODEL 2500_______________________________________________________2500_______________________________________________________

DANIEL INDUSTRIES, INC.

MODEL 2500 INSTRUMENTATION SYSTEM

USER REFERENCE MANUAL

NOTICE

DANIEL INDUSTRIES, INC. AND DANIEL MEASUREMENT AND CONTROL ("DANIEL")

SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS IN THIS MANUAL

OR OMISSIONS FROM THIS MANUAL. DANIEL MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS MANUAL

AND, IN NO EVENT, SHALL DANIEL BE LIABLE FOR ANY SPECIAL OR

CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF

PRODUCTION, LOSS OF PROFITS, ETC.

PRODUCT NAMES USED HEREIN ARE FOR MANUFACTURER OR SUPPLIER

IDENTIFICATION ONLY AND MAY BE TRADEMARKS/REGISTERED TRADEMARKS OF

THESE COMPANIES.

BY DANIEL MEASUREMENT AND CONTROL

HOUSTON, TEXAS, U.S.A.

copied in any form or by any means - graphic, electronic or

mechanical - without first receiving the written permission of

Daniel Measurement and Control, Houston, Texas, U.S.A.

________________________________________________________________________________________________________________________________________

PREFACEPREFACE i

____________________________________________________________________________________________________________ MODELMODEL 25002500

WARRANTY

Daniel Measurement and Control ("Daniel") warrants all equipment manufactured by it to be free

from defects in workmanship and material, provided that such equipment was properly selected

for the service intended, properly installed, and not misused. Equipment which is returned,

transportation prepaid to Daniel within twelve (12) months of the date of shipment (eighteen (18)

months from date of shipment for destinations outside of the United States), which is found after

inspection by Daniel to be defective in workmanship or material, will be repaired or replaced at

Daniel’s sole option, free of charge, and return-shipped at lowest cost transportation. All

transportation charges and export fees will be billed to the customer. Warranties on devices

purchased from third party manufacturers not bearing a Daniel label shall have the warranty

provided by the third party manufacturer.

Extended warranty - Models 2470, 2480 and 2500 are warranted for a maximum of twenty-four

(24) months. The Danalyzer valves are warranted for the life of the instrument and the columns

for five years.

The warranties specified herein are in lieu of any and all other warranties, express or implied,

including any warranty of merchantability or fitness for a particular purpose.

Daniel shall be liable only for loss or damage directly caused by its sole negligence. Daniel’s

liability for any loss or damage arising out of, connected with, or resulting from any breach

hereof shall in no case exceed the price allocable to the equipment or unit thereof which gives

rise to the claim. Daniel’s liability shall terminate one year after the delivery of the equipment

except for overseas deliveries and extended warranty products as noted above.

In no event, whether as a result of breach of warranty or alleged negligence, shall Daniel be

liable for special or consequential damages, including, but not limited to, loss of profits or

revenue; loss of equipment or any associated equipment; cost of capital; cost of substitute

equipment, facilities or services; downtime costs; or claims of customers of the purchaser for

such damages.

________________________________________________________________________________________________________________________________________

PREFACEPREFACE

MODELMODEL 2500_______________________________________________________2500_______________________________________________________

SECTION 1

INTRODUCTION ........................................ 1

MODEL 2500 HARDWARE ................................. 3

MODEL 2500 SOFTWARE ................................. 6

SECTION 2

CONTROL AND DISPLAY DEVICES ......................... 7

MODEL 2500 LED STATUS LIGHTS ......................... 8

MODEL 2500 DISPLAY SCREEN ............................ 9

MODEL 2500 KEYPAD ................................... 10

MODEL 2500 REMOTE FRONT PANEL ..................... 11

SECTION 3

STARTUP AND APPLICATION DOWNLOAD ................. 13

INITIALIZING SEQUENCE ............................... 14

TEST MALFUNCTIONS .................................. 15

FILE TYPES ........................................... 17

MEMORY RESIDENT SOFTWARE ......................... 18

HARD DRIVE USE ...................................... 19

DOWNLOADING INSTRUCTIONS .......................... 20

________________________________________________________________________________________________________________________________________

TABLETABLE OFOF CONTENTSCONTENTS iii

____________________________________________________________________________________________________________ MODELMODEL 25002500

SECTION 3 (continued)

LOAD2500 - STAND-ALONE DOWNLOAD PROGRAM ......... 29

STAND-ALONE DOWNLOAD PROGRAM EXAMPLES .......... 30

SYSTEM READY ....................................... 32

DATA ENTRY SECURITY ................................. 32

SECURITY SWITCH .................................... 33

LOWER-LEVEL SECURITY PASSWORD .................... 34

RESTRICTED-USER PASSWORD .......................... 35

DATA ENTRY AT INITIAL STARTUP ....................... 36

PROCEDURE OF DATA ENTRY AT INITIAL STARTUP ........ 37

TYPICAL START-UP DATA CHANGES ...................... 40

TIME-OF-DAY CLOCK CHIP ............................. 41

________________________________________________________________________________________________________________________________________

TABLETABLE OFOF CONTENTSCONTENTS

MODELMODEL 2500_______________________________________________________2500_______________________________________________________

SECTION 4

MENU SELECTION ..................................... 43

MAIN MENU .......................................... 44

SUB-MENUS ........................................... 45

INPUT CHANNELS ................................. 46

OUTPUT CHANNELS ............................... 46

ALARMS ......................................... 47

OPERATOR ENTRY ................................ 47

CALCULATIONS ................................... 48

REPORTS ........................................ 48

TABLES .......................................... 49

TUBE SWITCHING ................................. 49

MODBUS MASTER ................................. 51

SERIAL PORTS .................................... 52

ARCHIVE ........................................ 56

SYSTEM COMMANDS .............................. 56

MENU DISPLAY AND SELECTION PROCEDURE ............. 60

________________________________________________________________________________________________________________________________________

TABLETABLE OFOF CONTENTSCONTENTS v

____________________________________________________________________________________________________________ MODELMODEL 25002500

SECTION 4 (continued)

MENU FLOW CHART DIAGRAMS ......................... 63

11 SUB-MENUS CHART ............................. 64

INPUT CHANNELS CHART .......................... 65

OUTPUT CHANNELS CHART ......................... 66

ALARMS CHART .................................. 67

OPERATOR ENTRY CHART .......................... 68

CALCULATIONS CHART ............................ 69

REPORTS CHART ................................. 70

TABLES CHART ................................... 71

TUBE SWITCHING CHART .......................... 72

MODBUS MASTER CHART .......................... 73

SERIAL PORTS CHART A ........................... 74

SERIAL PORTS CHART B ........................... 75

ARCHIVE CHART ................................. 76

SYSTEM COMMANDS CHART ....................... 77

________________________________________________________________________________________________________________________________________

TABLETABLE OFOF CONTENTSCONTENTS

Inhaltsverzeichnis

Andere DANIEL Computerhardware Handbücher

DANIEL

DANIEL 2234 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung