DAPAudio DVMP-250 Bedienungsanleitung

DVMP-250 V1

Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands

Ordercode: D1133

MANUAL

ENGLISH

Ordercode: D1133

DVMP-250

Table of contents

Warning ...............................................................................................................................................................................2

Unpacking Instructions .............................................................................................................................................2

Safety Instructions......................................................................................................................................................2

Operating Determinations.......................................................................................................................................3

Connection with the mains .....................................................................................................................................4

Return Procedure ......................................................................................................................................................4

Claims ..........................................................................................................................................................................4

Description of the device.................................................................................................................................................5

Overview.....................................................................................................................................................................5

Frontside ......................................................................................................................................................................6

Backside......................................................................................................................................................................6

Remote control..........................................................................................................................................................7

Names and functions........................................................................................................................................................8

Installation.........................................................................................................................................................................10

Set Up and Operation .....................................................................................................................................................10

Operations ........................................................................................................................................................................11

01) Preparation.......................................................................................................................................................11

02) Normal Playback.............................................................................................................................................11

03) Pause .................................................................................................................................................................11

04) Stop ....................................................................................................................................................................11

05) Previous and next............................................................................................................................................11

06) Fast Forward/Reverse .....................................................................................................................................11

07) Video Mode .....................................................................................................................................................11

08) Step ....................................................................................................................................................................11

09) Repeat...............................................................................................................................................................11

10) Loop play ..........................................................................................................................................................11

11) Slow ....................................................................................................................................................................11

12) Program.............................................................................................................................................................12

13) Zoom ..................................................................................................................................................................12

14) Volume and Mute ...........................................................................................................................................12

15) Menu..................................................................................................................................................................12

16) Subtitles .............................................................................................................................................................12

17) Angle .................................................................................................................................................................12

Before switching off the power .....................................................................................................................................13

System Setup ....................................................................................................................................................................14

A. General .............................................................................................................................................................14

B. Audio Setup......................................................................................................................................................17

C. Dolby Setup ......................................................................................................................................................20

D. Video Setup......................................................................................................................................................21

E. Preference ........................................................................................................................................................24

Setup examples ...............................................................................................................................................................26

Connection of a television set ..............................................................................................................................26

Connection of a television set using an A/V-cable .........................................................................................26

Connection of an audio system and TV-set using the component outputs ...............................................26

Connection of an amplifier with digital audio input and TV-set....................................................................27

Maintenance....................................................................................................................................................................27

Troubleshooting ...............................................................................................................................................................27

Product Specifications....................................................................................................................................................28

Notes ..................................................................................................................................................................................29

Ordercode: D1133

DVMP-250

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

• DAP DVMP-250

• User manual

•IR remote control

Safety Instructions

Every person involved with the installation, operation and maintenance of this system has to:

•be qualified

•follow the instructions of this manual

Before the initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the system.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the system are not subject to

warranty.

This system contains no user-serviceable parts. Refer servicing to qualified technicians only.

Ordercode: D1133

DVMP-250

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the system.

Never let the power cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Never use anything to cover the ground contact.

Never leave any cables lying around.

Do not insert objects into air vents.

Do not connect this system to a dimmerpack.

Do not switch the system on and off in short intervals, as this would reduce the system’s life.

Do not open the device and do not modify the device.

Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.

Only use system indoor, avoid contact with water or other liquids.

Avoid flames and do not put close to flammable liquids or gases.

Always disconnect power from the mains, when system is not used. Only handle the power-cord by

the plug. Never pull out the plug by tugging the power-cord.

Make sure you don’t use the wrong kind of cables or defective cables.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the system and the power-

cord from time to time.

Please turn off the power switch, when changing the power cord or signal cable, or select the input

mode switch.

Avoid ground loops! Always be sure to connect the power amps and the mixing console to the

same electrical circuit to ensure the same phase!

If system is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your system. Leave the

system switched off until it has reached room temperature.

If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Dap Audio dealer for service.

Repairs, servicing and electric connection must be carried out by a qualified technician.

For replacement use fuses of same type and rating only.

WARRANTY: Till one year after date of purchase.

Operating Determinations

This system is not designed for permanent operation. Consistent operation breaks will ensure that the

system will serve you for a long time without defects.

If this system is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious injuries and damage of property !

Ordercode: D1133

DVMP-250

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

FASE

BLUE

BLACK

SILVER

NULL

YELLOW/GREEN

GREEN

EARTH

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property!

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

01) Your name

02) Your address

03) Your phone number

04) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

agreed otherwise in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

Ordercode: D1133

DVMP-250

Description of the device

Features

The DAP-audio DVMP-250 is a 2U Karaoke DVD player

•Supports all common audio/video formats

•Contains S-Video, TV, Component Video, VGA, HDMI and BNC video outputs

•Balanced XLR audio outputs

•19” Rack mounts included

•Headphones 6,3 mm jack output

•IR Remote control included

Overview

Fig. 01

Ordercode: D1133

DVMP-250

Frontside

Fig. 02

Power switch

R/L button

Display

IR Remote sensor

Disc holder

Source button

LCD Display

Play/pause button

Direct access buttons

Eject button

Fast reverse button

Return button

Fast forward button

Flat button

Previous button

Time button

Phone input

Sharp button

Level control

Repeat button

SD port

Video button

USB A port

Next button

Backside

Fig. 03

HDMI out

Digital audio (optical) out

Audio stereo RCA unbalanced out

VGA out

Digital audio RCA (coax) out

Audio stereo XLR balanced out

Composite RCA video out

Video BNC out

Component RCA video out

IEC Power connector 100-240V AC

S-video out

Ordercode: D1133

DVMP-250

Remote control

Fig. 04

Source button

Step button

A-B button

Sharp button (key control)

Nor button (key control)

Menu button

N/P button

OK button

Eject button

Cursor right button

Flat button (key control)

R/L button

Cursor up button

Return button

Setup button

Next button

Cursor left button

Previous button

Time button

Video out button

Cursor down button

Prog. Button

Stop button

Vol + button

Play/pause button

Vol –button

Fast reverse button

Zoom button

Fast forward button

Angle button

Repeat button

Clear button

Title button

Mute button

Direct access buttons

Copy button

Slow button

Ordercode: D1133

DVMP-250

Names and functions

Below is a description of the functions of the controls.

01) Power switch

This is the main power switch. Press to turn the device on or off.

02) Display

03) Disc holder

Place the disc in the holder. Push the eject (17/40) button to open and close the disc holder.

04) LCD display

05/53) Direct access buttons

Use these buttons to select a track directly. You can also use the 10+ button to move 10 tracks

forward. E.g. if your current track is 5, pushing the +10 button will select track 15.

06/49) Fast reverse button

Push and hold this button to play a track fast backwards.

07/50) Fast forward button

Push and hold this button to play a track fast forwards.

08/63) Previous button

Use this button to go back to the beginning of the current track or select the previous track to be

played.

09) Phone output

You can connect a pair of headphones with an impedance of 32 - 600 Ohm to the headphones

connector. It is a 6,3 mm (1/4”) TRS socket, wired as Tip=left, Ring=right and sleeve = ground.

Caution:

Depending on the type of headphones connected to the Headphones jack, the DVMP-250 is

capable of producing high output levels via the phones output. Therefore, make sure to turn the

control all the way to the left (minimum setting) before connecting the headphones. Be aware of

the fact that listening to loud sound pressure levels over a longer period of time leads to hearing-

damage!

10) Level control

This button is used to adjust the volume level of the phone (09)output.

11) SD port

Use this port to connect an SD card.

12) USB port

Use this port to connect a USB flash drive.

13/60) R/L button

This button allows you to assign the DVD/MP3 player’s left channel, right channel or both

(stereo) channels to the main mix.

14) IR remote sensor

15/36) Source button

Tap this button to select SD, USB or Disc as playback source.

16/48) Play/Pause button

This button allows you to toggle between pause mode and playback mode.

17/40) Eject button

Push this button to open and close the disc holder (03).

18/61) Return

This button allows you to return to the start of the current track.

19/41) Flat button

Every time this button is pushed, the pitch of the current track will decrease by one semi tone.

Total range is +/- 9 semitones.

20/45) Time button

Use this button to switch the TIME indication on the LCD display (04) between the elapsed

time and remaining time. The selected mode is indicated by ELAPSED or REMAIN.

21/56) Sharp button

Every time this button is pushed, the pitch of a current track will increase by one semi tone.

Total range is +/- 9 semitones.

22/51) Repeat button

Use this button to repeat one track or all tracks of the medium.

See the section Repeat on page 11.

Ordercode: D1133

DVMP-250

23/64) Video button

Pushing this button allows you to switch between YUV, VGA and S-Video modes.

24/62) Next button

Use this button to skip to a following track.

25) HDMI out

Connect the input of a HDMI monitor to this output.

26) Audio stereo RCA unbalanced out

Connect an unbalanced line input of your mixer/ amplifier to this output.

27) RCA coax out

Connect a digital audio input of your mixer/amplifier to this output.

28) RCA video out

Connect the video input of your TV-set to this output.

29) Component RCA video out

Connect the composite video input of your TV-set to these outputs.

30) S-Video out

Connect the S-video input of your TV-set to this output.

31) Optical out

Connect an optical (digital) audio input of your mixer/amplifier to this output.

32) VGA out

Connect the input of a VGA monitor to this output.

33) Audio stereo XLR balanced out

Connect a balanced line input of your mixer/ amplifier to this output.

34) Video BNC out

Connect the coax video input of your TV-set to this output.

35) IEC Power connector 100-240V AC

This connector is meant for the connection of the supplied power cord. Connect one end of the

power cord to the connector, the other end to the mains, and turn on the power (01) switch to

operate the unit.

37) A-B button

Push this button once to set the start point (Repeat A will appear on screen). Push again to set the

endpoint of a loop (Repeat B will appear on screen). As soon as the endpoint is set, loop play will

start. Push for the third time to exit loop play.

38) Nor button

This button allows you to return to normal pitch.

39) N/P button

Use this button to select your TV system: PAL/NTSC

42/44/46/59) Arrow buttons

Use these buttons to navigate through the onscreen menus.

43) Setup button

Push this button to open the onscreen setup menu.

47) Stop button

Push this button to stop playback.

52) Title button

Push this button to choose a subtitling language.

54) Slow button

Push this button to play a track at a lower speed.

55) Step button

Push this button to step through your frames one frame at a time.

57) Menu button

Push this button to open the onscreen DVD menu.

58) OK button

Confirm your selection in the onscreen menu by pushing this button.

65) Prog. button

Stop playback and push the PGM button, the player will enter the program mode. For more

information, see the section Program on page 12.

66) Volume + button

Pushing this button allows you to increase the volume level of the audio outputs.

67) Volume –button

Pushing this button allows you to decrease the volume level of the audio outputs.

Inhaltsverzeichnis

Andere DAPAudio DVD-Player Handbücher

DAPAudio

DAPAudio DS-220K Bedienungsanleitung

Beliebte DVD-Player Handbücher anderer Marken

Sony

Sony DVP-F11 Bedienungsanleitung

Philips

Philips DVP3560K/F8 Bedienungsanleitung

LENCO

LENCO DVP-740 X2 Bedienungsanleitung

JVC

JVC XV-N650BEU Bedienungsanleitung

Aiwa

Aiwa XD-DV370 Bedienungsanleitung

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Bedienungsanleitung

Denon

Denon DVM-1805 - DVD Changer Bedienungsanleitung

Toshiba

Toshiba SD-3815 Bedienungsanleitung

Tevion

Tevion 44330 Bedienungsanleitung

Samsung

Samsung DVD-HD860 Bedienungsanleitung

Sylvania

Sylvania DP170SL8 Bedienungsanleitung

Toshiba

Toshiba SD-P1200 Bedienungsanleitung

JVC

JVC XV-D9000E Bedienungsanleitung

Dolby Laboratories

Dolby Laboratories CP650 Bedienungsanleitung

Philips

Philips DVD737K/931 Bedienungsanleitung

Denon

Denon DVD-5900 Bedienungsanleitung

Philips

Philips DVD 951 Bedienungsanleitung

Philips

Philips DVDR3460 Bedienungsanleitung