DAPAudio M9000 Bedienungsanleitung

M9000

User’s Guide

F2 F3

F5 F6

PN: 769-00005 • May 2012

M9010 is a registered trademark of DAP Technologies. Microso and MS-DOS® are

registered trademarks of Microso Corporation.

Table of Contents

1.0 Introduction ................................... 7

1.1 User and Product Safety ................................7

1.2 LED and LASER Safety Information .................... 7

1.3 FCC Interference Statement............................ 7

1.4 Industry Canada Statement ............................ 7

1.5 Battery Safety ......................................... 7

1.6 Warranty Statements .................................. 8

1.7 Warranty and After Service ............................ 8

1.8 Europe – EU Declaration of Conformity ................ 8

1.9 European Union CE Marking and Compliance Notices .. 9

1.10 Specications......................................... 10

2.0 Getting Started...............................11

2.1 What’s In the Package .................................11

2.2 Installing Optional Memory Cards .....................11

2.3 Install the Battery .....................................13

2.4 Charge the Battery ....................................13

2.4.1 Plugging In ......................................13

2.4.2 LED Indicators...................................14

2.5 Operating the Unit.....................................15

2.5.1 Turning the Unit On ..............................15

2.5.2 Calibrating the Touchscreen .......................15

2.5.3 Launching an Application .........................16

2.5.3.1 Using the Stylus.........................16

2.5.3.2 Using the Nav Button ....................16

2.5.4 Entering Data ....................................17

2.5.5 Using the Function Button.........................17

2.5.5.1 Function Button Key Combinations .......17

2.5.5.2 Function Button with Function Keys ......17

2.5.6 Navigating the Display ............................18

2.5.6.1 e Task Bar............................18

2.5.6.2 e Onscreen Keyboard..................18

2.5.6.3 Entering the Data .......................18

2.6 DAP Conguration Center .............................19

2.6.1 System Info ......................................19

2.6.2 Display Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

2.6.3 Tablet PC Settings ................................19

2.6.3.1 Display Tab – Congure .................19

2.6.3.2 Display Tab – Calibrate ..................19

2.6.3.3 Display Tab – Reset......................20

2.6.3.4 Other Tab – Handedness .................20

2.6.3.5 Other Tab – Pen and Touch...............20

2.6.3.5.1 Pen Options Tab –

Congure Double-Tap ........21

2.6.3.5.2 Pen Options Tab –

Congure Press and Hold .....21

2.6.3.5.3 Pen Options Tab –

Congure Start Tablet PC

Input Panel ..................22

2.6.3.5.4 Flicks Tab – Navigational ......23

2.6.3.5.5 Flicks Tab – Sensitivity ........23

2.6.3.5.6 Handwriting Tab .............24

2.6.3.5.7 Touch Tab...................24

2.6.3.6 Other Tab – Go to Input Panel Settings ....24

2.6.4 Power Options ...................................25

2.6.5 Charger Cong...................................25

2.6.6 Hotkey ..........................................25

2.7 Setting Up Wireless LAN ...............................26

2.8 Using the 1D Barcode Scanner .........................26

2.9 Setting Up Link One for Reading 1D Laser Barcodes ....26

2.9.1 Unload Button ...................................27

2.9.2 Hide Button .....................................27

2.9.3 Settings Button...................................27

2.9.4 Settings Window .................................27

2.9.4.1 Communication Tab.....................27

2.9.4.1.1 Port ........................28

2.9.4.1.2 DTR High / RTS High ........29

2.9.4.1.3 Hardware Pin Events..........29

2.9.4.2 Keyboard Tab...........................30

2.9.4.2.1 Interkey Delay ...............30

2.9.4.2.2 Key Settings .................30

2.9.4.2.3 Hot Keys ....................32

2.9.4.2.4 Keyboard Capture —

External USB Device..........36

2.9.4.2.5 Record Key Sequence .........39

2.9.4.3 Data Editing Tab ........................40

2.9.4.3.1 Wizard......................41

2.9.4.3.2 Edit Script...................43

2.9.4.3.3 Browse Script Folder..........43

2.9.4.4 Misc Tab ...............................43

2.9.4.4.1 Use Log File .................43

2.9.4.4.2 Set Password.................44

2.9.4.4.3 Settings Location.............44

2.10 Link*One Scripting ....................................45

2.10.1 Overview ........................................45

2.10.2 Lua Language ....................................45

2.10.3 Script Events .....................................45

2.10.4 Event Methods ...................................45

2.10.4.1 onStart() ...............................45

2.10.4.2 onEnd()................................45

2.10.4.3 onData(data, length).....................45

2.10.4.4 onHotKey(name)........................46

2.10.4.5 onKeyboardCapture(name, data)..........46

2.10.4.6 onExternalData(data, length) .............46

2.10.4.7 onTimer() ..............................46

2.10.4.8 onCTS(status) ..........................47

2.10.5 Script Methods...................................47

2.10.6 Output/User Feedback ............................48

2.10.6.1 beep(frequency, duration) ................48

2.10.6.2 blinkIcon(icon, duration) ................48

2.10.6.3 log(lename, message) ...................48

2.10.6.4 messageBox(title, message, type) ..........48

2.10.6.5 playSound(lename, options) .............49

2.10.6.6 playSystemSound(systemEvent, options) ...49

2.10.6.7 send(data) ..............................49

2.10.6.8 sendSerialData(data, length)..............50

2.10.6.9 sendSubscriberData(data, length) .........50

2.10.7 Windows ........................................51

2.10.7.1 enumWindows(handle) ..................51

2.10.7.2 ndWindow(title, class)..................51

2.10.7.3 getForegroundWindow().................51

2.10.7.4 getWindowClass(handle).................51

2.10.7.5 getWindowClass(handle).................52

2.10.7.6 getWindowText(handle)..................52

2.10.7.7 setForegroundWindow(handle)...........52

2.10.7.8 getWindowText(handle, text) .............52

2.10.7.9 windowOperation(handle, operation) .....53

2.10.8 Clipboard .......................................53

2.10.8.1 getClipboardData()......................53

2.10.8.2 setClipboardData(text)...................53

2.10.9 Application Launch...............................54

2.10.9.1 closeAppHandle(handle).................54

2.10.9.2 isAppRunning(handle) ..................54

2.10.9.3 run(program, argument, delay) ...........54

2.10.10 Serial Port .......................................55

2.10.10.1 closePort() .............................55

2.10.10.2 getDTR()...............................55

2.10.10.3 getRTS() ...............................55

2.10.10.4 openPort() .............................55

2.10.10.5 setDTR(status) ..........................56

2.10.10.6 setRTS(status) ..........................56

2.10.11 Miscellaneous....................................56

2.10.11.1 ean128(data, strict) ......................56

2.10.11.2 exit() ..................................56

2.10.11.3 exitWindows(options) ...................57

2.10.11.4 getProle() .............................57

2.10.11.5 getTickCount() .........................57

2.10.11.6 lockWorkStation().......................57

2.10.11.7 setProle(prole)........................58

2.10.11.8 setTimer(interval).......................58

2.10.11.9 sleep(duration)..........................58

2.10.12 Notication Area Icon ............................58

2.10.13 Migration guide WLinq 3.x to Link*One ............59

2.10.13.1 Duplicate String Filter ...................59

2.10.13.2 Case Setting ............................59

2.10.13.3 Character Translation ...................59

2.10.13.4 Send Pre- and Postx Keys ...............59

2.10.13.5 Lock Output Window....................59

2.10.13.6 Initialization String .....................59

2.10.13.7 Filter Unknown Data Strings .............59

2.10.13.8 Input Data Replacements.................60

2.10.13.9 Criteria ................................60

2.10.13.10 Data Format Output .....................60

2.10.14 Support for in Clients, Java Applications,

and Flash Applications ............................62

2.10.15 Lua Copyright ...................................62

2.10.16 Version History ..................................62

3.0 Operating the Unit ..........................63

3.1 GPS Instructions .......................................63

3.1.1 Requirements:....................................63

3.1.2 Set up to use the GPS..............................63

3.1.3 Integration to Windows 7..........................64

3.2 DAP-Imager Instructions ...............................64

3.2.1 What is DAP-Imager..............................64

3.2.2 Selecting the Right Mode ..........................64

3.2.3 Pictures .........................................64

3.2.3.1 How to Take a Picture ...................64

3.2.3.2 Flash ..................................64

3.2.3.3 Geotagging.............................65

3.2.3.3.1 How to enable the GPS........65

3.2.3.3.2 How to View Geotagging

Data........................65

3.2.3.4 How to Locate a Saved Picture ............65

3.2.3.5 General Options ........................65

3.2.4 Barcodes ........................................65

3.2.4.1 How to Scan Barcodes ...................66

3.2.4.1.1 Using ScannerManager........66

3.2.4.1.2 Using DAP-Imager as a

Stand-Alone Application ...... 66

3.2.4.2 Decoder Conguration ..................66

3.2.5 .INI Conguration File............................66

3.2.6 [General] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

3.2.6.1 TargetFolder = %PICTURES%\%YEAR%-

%MONTH%-%DAY% ...................67

3.2.6.2 FileNameTemplate =

%HOUR%h%MINUTE%m%SECOND%s..67

3.2.6.3 DefaultImagerMode = Portrait............67

3.2.6.4 FlashLightDurationMs = 10000...........67

3.2.6.5 Func1VirtualKey = 135 ..................67

3.2.6.6 Func2VirtualKey = 117 ..................67

3.2.6.7 Func1KeyModiers = 0 ..................67

3.2.6.8 Func2KeyModiers = 0 ..................67

3.2.6.9 Func1KeySystemWide = 1 ................67

3.2.6.10 Func2KeySystemWide = 0................67

3.2.7 [Camera] ........................................67

3.2.7.1 InactiveTimeBeforeStandbyLevel1 =

10000..................................67

3.2.7.2 ActivateDapImagerOnTrigger = OFF ......67

3.2.7.3 ShowImageNameOnPreview = OFF .......67

3.2.8 [Barcodes] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

3.2.8.1 EnableAutoPreview = ON ................67

3.2.8.2 PreviewWndRect = 0 0 320 240 ...........67

3.2.8.3 UIPolicy = Legacy.......................67

3.2.8.4 DefaultFocus = 3733 .....................68

3.2.8.5 Aimer = ON ............................68

3.2.8.6 DecodeAerAutofocus = ON .............68

3.2.8.7 MaxNbrResults = 1......................68

3.2.8.8 DecodeTimeoutMs = 1500................68

3.2.8.9 MaxNbrAttempts = 1 ....................68

3.2.8.10 InactiveTimeBeforeStandbyLevel1 =

10000..................................68

3.2.8.11 InactiveTimeBeforeStandbyLevel2 =

10000..................................68

3.2.8.12 KbWedge = OFF ........................68

3.2.8.13 AddTab = OFF ..........................68

3.2.8.14 AddEnter = ON .........................68

3.2.8.15 Preamble = .............................68

3.2.8.16 Postamble = ............................68

3.2.8.17 InterCharDelay = 0 ......................68

3.2.8.18 MaxGainWithoutMVLight = 2500 ........68

3.2.8.19 MinGainWithMovieLight = 1000 .........68

3.2.8.20 MaxGain = 4000 . . . . . . . . . . . . . . . . . . . . . . . .68

3.2.8.21 GainStep = 200 .........................68

3.2.8.22 IdealGain = 2000........................68

3.2.8.23 FlashIntensityStep = 100 .................68

3.2.8.24 MaxFlashIntensity = 100 .................68

3.2.8.25 MaxShutter = 4000 ......................68

3.2.8.26 ShutterStep = 260 .......................68

3.2.8.27 IdealShutter = 575.......................68

3.2.8.28 AppendSymbology = OFF ................68

3.2.9 [OCR]...........................................68

3.2.10 [ImagerModes]...................................68

3.2.8.1 ModeList =

Portrait,Landscape,Macro,Barcode, .......68

3.2.11 [ImagerMode:XXXX] .............................68

3.2.11.1 ModeType = 0...........................68

3.2.11.2 IconID = 142 ...........................68

3.2.11.3 SelectionButtonImageFileName =

res\button-mode-portrait80.png ..........68

3.2.11.4 Enabled = ON ..........................69

3.2.11.5 AutoFlash = ON.........................69

3.2.11.6 GpsReportTypes = 1 .....................69

3.2.11.7 PreviewWidth = 640.....................69

3.2.11.8 PreviewHeight = 480 ....................69

3.2.11.9 StillWidth = 1600 .......................69

3.2.11.10 StillHeight = 1200 .......................69

3.2.11.11 ColorSpace = 16.........................69

3.2.11.12 FrameRate = 30.000000..................69

3.2.11.13 Shutter = 10000 .........................69

3.2.11.14 Brightness = 5000 .......................69

3.2.11.15 GlobalGain = 0 .........................69

3.2.11.16 Exposure = 5000 ........................69

3.2.11.17 FlipMode = 1 ...........................69

3.2.11.18 AutoExposure = ON.....................69

3.2.11.19 LightingMode = 0 .......................69

3.2.11.20 LightingPower = 0.......................69

3.2.11.21 Aimer = OFF ...........................69

3.2.11.22 Compression = ON ......................69

3.2.11.23 CompressionRatio = 13 ..................69

3.2.11.24 FocusPosition = 500 .....................69

3.2.11.25 Autofocus = ON.........................69

3.2.11.26 WhiteBalancePreset = 0..................69

3.2.11.27 ManualWhiteBalance = OFF .............69

3.2.11.28 WhiteBalanceKelvin = 8267 ..............69

3.2.11.29 PreviewToWindow = ON.................69

3.2.12 [Permissions] ....................................69

3.2.12.1 Option(More) = 3 .......................69

3.3 Command-Line Options ................................70

3.3.1 Syntax ..........................................70

4.0 Programming the Unit ....................71

4.1 Bar Code Parameter Menus ............................71

4.2 Bar Code Settings......................................74

4.2.1 Set Default Parameter .............................74

4.2.2 Beeper Volume ...................................74

4.2.3 Beeper Tone .....................................74

4.2.4 Beeper Frequency Adjustment .....................74

4.2.5 Laser On Time ...................................75

4.2.6 Aim Duration....................................75

4.2.7 Scan Angle ......................................75

4.2.8 Power Mode .....................................75

4.2.9 Triggering Modes.................................76

4.2.10 Time-out Between Same Symbol ...................76

4.2.11 Beep Aer Good Decode ..........................76

4.2.12 Transmit “No Read” Message ......................76

4.2.13 Parameter Scanning ..............................77

4.2.14 Linear Code Type Security Level ...................77

4.2.15 Bi-directional Redundancy ........................77

5.0 UPC Types .......................................78

5.1 UPC / EAN..............................................78

5.1.1 Enable/Disable UPC-A : Parameter # 0x01...........78

5.1.2 Enable/Disable UPC-E : Parameter # 0x02 ...........78

5.1.3 Enable/Disable UPC-E1 : Parameter # 0x0C .........78

5.1.4 Enable/Disable EAN-8 : Parameter # 0x04 ...........78

5.1.5 Enable/Disable EAN-13 : Parameter # 0x03 ..........78

5.1.6 Enable/Disable Bookland EAN : Parameter # 0x53....78

5.1.7 Decode UPC/EAN Supplementals :

Parameter # 0x10 .................................79

5.1.8 Decode UPC/EAN Supplemental Redundancy :

Parameter # 0x50 .................................79

5.1.9 Transmit UPC-A Check Digit : Parameter # 0x28.....80

5.1.10 Transmit UPC-E Check Digit : Parameter # 0x29 .....80

5.1.11 Transmit UPC-E1 Check Digit : Parameter # 0x2A ...80

5.1.12 UPC-A Preamble : Parameter # 0x22................80

5.1.13 UPC-E Preamble : Parameter # 0x23 ................80

5.1.14 UPC-E1 Preamble : Parameter # 0x24 ...............81

5.1.15 Convert UPC-E to UPC-A : Parameter # 0x25........81

5.1.16 Convert UPC-E1 to UPC-A : Parameter # 0x26.......81

5.1.17 EAN Zero Extend : Parameter # 0x27 ...............81

5.1.18 Convert EAN-8 to EAN-13 Type :

Parameter # 0xE0.................................81

5.1.19 UPC/EAN Security Level : Parameter # 0x4D . . . . . . . .82

5.1.20 UCC Coupon Extended Code : Parameter # 0x55.....82

5.2 Code 128 ..............................................82

5.2.1 Enable/Disable Code 128 : Parameter # 0x08 .........82

5.2.2 Enable/Disable UCC/EAN-128 :

Parameter # 0x0E.................................82

5.2.3 Enable/Disable ISBT 128 : Parameter # 0x54 .........83

5.2.4 Lengths for Code 128 .............................83

5.3 Code 39................................................83

5.3.1 Enable/Disable Code 39 : Parameter # 0x00 ..........83

5.3.2 Enable/Disable Trioptic Code 39 :

Parameter # 0x0D.................................83

5.3.3 Convert Code 39 to Code 32 (Italian Pharma

Code) : Parameter # 0x56 ..........................83

5.3.4 Code 32 Prex : Parameter # 0xE7 ..................83

5.3.5 Set Lengths for Code 39 :

Parameter # L1 = 0x12, L2 = 0x13...................83

5.3.6 Code 39 Check Digit Verication :

Parameter # 0x30 .................................84

5.3.7 Transmit Code 39 Check Digit :

Parameter # 0x2B.................................84

5.3.8 Enable/Disable Code 39 Full ASCII :

Parameter # 0x11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

5.4 Code 93................................................85

5.4.1 Enable/Disable Code 93 : Parameter # 0x00 ..........85

5.4.2 Set Lengths for Code 93 :

Parameter # L1 = 0x1A, L2 = 0x1B ..................85

5.5 Code 11................................................85

5.5.1 Enable/Disable Code 11 : Parameter # 0x0A..........85

5.5.2 Set Lengths for Code 11 :

Parameter # L1 = 0x1C, L2 = 0x1D..................85

5.5.3 Code 11 Check Digit Verication :

Parameter # 0x34 .................................86

5.5.4 Transmit Code 11 Check Digits :

Parameter # 0x2F.................................86

5.6 Interleaved 2 of 5......................................86

5.6.1 Enable/Disable Interleaved 2 of 5 :

Parameter # 0x06 .................................86

5.6.2 Set Lengths for Interleaved 2 of 5 :

Parameter # L1 = 0x16, L2 = 0x17...................86

5.6.3 Interleaved 2 of 5 Check Digit Verication :

Parameter # 0x31 .................................87

5.6.4 Transmit Interleaved 2 of 5 Check Digit :

Parameter # 0x2C ................................87

5.6.5 Convert Interleaved 2 of 5 to EAN-13 :

Parameter # 0x52 .................................87

5.7 Discrete 2 of 5 ........................................88

5.7.1 Enable/Disable Discrete 2 of 5 : Parameter # 0x05 ....88

5.7.2 Set Lengths for Discrete 2 of 5 :

Parameter # L1 = 0x14, L2 = 0x15...................88

5.8 Chinese 2 of 5 .........................................88

5.8.1 Enable/Disable Chinese 2 of 5 :

Parameter # 0xF0 0x98 ............................88

5.9 Codabar ...............................................88

5.9.1 Enable/Disable Codabar :

Parameter # 0x07 .................................88

5.9.2 Set Lengths for Codabar :

Parameter # L1 = 0x18, L2 = 0x19...................89

5.9.3 CLSI Editing : Parameter # 0x36....................89

5.9.4 NOTIS Editing : Parameter # 0x37..................89

5.10 MSI ....................................................89

5.10.1 Enable/Disable MSI : Parameter # 0x0B .............89

5.10.2 Set Lengths for MSI :

Parameter # L1 = 0x1E, L2 = 0x1F ..................90

5.10.3 MSI Check Digits : Parameter # 0x32................90

5.10.4 Transmit MSI Check Digit : Parameter # 0x2E .......90

5.10.5 MSI Check Digit Algorithm : Parameter # 0x33 ......90

5.11 RSS ....................................................91

5.11.1 Enable/Disable RSS-14 : Parameter # 0xF0 0x52 ......91

5.11.2 Enable/Disable RSS-Limited :

Parameter # 0xF0 0x53 ............................91

5.11.3 Enable/Disable RSS-Expanded :

Parameter # 0xF0 0x54 ............................91

5.12 Data Options ..........................................91

5.12.1 Transmit Code ID Character : Parameter # 0x2D .....91

5.12.2 Prex/Sux Values :

Parameter # P = 0x69, S1 = 0x68, S2 = 0x6A .......... 92

5.12.3 Scan Data Transmission Format :

Parameter # 0xEB ................................92

5.13 Serial Interface ........................................93

5.13.1 Baud Rate : Parameter # 0x9C......................93

5.13.2 Parity : Parameter # 0x9E..........................93

5.13.3 Soware Handshaking : Parameter # 0x9F...........93

5.13.4 Decode Data Packet Format : Parameter # 0xEE......94

5.13.5 Host Serial Response Time-out : Parameter # 0x9B ...94

5.13.6 Stop Bit Select : Parameter # 0x9D ..................94

5.13.7 Intercharacter Delay : Parameter # 0x6E.............94

5.13.8 Host Character Time-out : Parameter # 0xEF ........94

5.14 Event Reporting .......................................95

5.14.1 Decode Event : Parameter # 0xF0 0x00 . . . . . . . . . . . . . .95

5.14.2 Boot Up Event : Parameter # 0xF0 0x02 .............95

5.14.3 Parameter Event : Parameter # 0xF0 0x03............95

5.15 Numeric Bar Codes.....................................95

5.15.1 Cancel ..........................................95

6.0 Summit Radio .................................96

6.1 Summit Client Utility ..................................96

6.1.1 Main Window ...................................96

6.1.2 Prole Window ..................................97

6.1.2.1 Radio Settings ..........................98

6.1.2.2 Preferred Band for 802.11a/g Radio ........98

6.1.2.3 Ad Hoc ................................98

6.1.2.4 Security Settings ........................99

6.1.2.5 Using Scan to Create a Prole.............99

6.1.2.6 EAP Credentials .......................101

6.1.2.7 Encryption ............................102

6.1.2.7.1 Cisco TKIP.................102

6.1.2.7.2 WPA Migration Mode and

WPA2 Mixed Mode..........102

6.1.2.8 irdPartyCong ......................102

6.1.2.9 EAP-FAST ............................102

6.1.3 Status Window ..................................102

6.1.4 Diags Window ..................................103

6.1.5 Global Window .................................103

6.1.6 PMK Caching ...................................106

7.0 BlueTooth.......................................107

7.1 Introduction ..........................................107

7.1.1 Bluetooth Functions .............................107

7.1.2 Main Window ..................................107

7.2 Basic Operations......................................108

7.2.1 Start BlueSoleil ..................................108

7.2.2 Search for Other Bluetooth Enabled Devices . . . . . . . .108

7.2.3 Establish Connection...............................108

7.2.3.1 Start the Service........................108

7.2.3.2 Initiate the Connection .................108

7.2.4 Bluetooth Security...............................109

7.3 Getting Started .......................................109

7.3.1 AV Headphone ..................................109

7.3.2 Basic Imaging ...................................109

7.3.3 Dial-up Networking .............................109

7.3.4 FAX ...........................................110

7.3.5 File Transfer ....................................110

7.3.5.1 Connect to a Mobile Phone ..............110

7.3.5.2 Share a Folder on Your Computer

with other Bluetooth-Enabled Devices ....110

7.3.5.3 Access a Shared Folder on Another

Bluetooth Enabled Device . . . . . . . . . . . . . . . 111

7.3.6 Headset ........................................111

7.3.7 Human Interface Device .........................111

7.3.8 LAN Access.....................................111

7.3.9 Object Push.....................................112

7.3.9.1 Push Objects to a Bluetooth-Enabled

Mobile Phone ..........................112

7.3.9.2 Receive Objects from a Bluetooth

Enabled Mobile Phone ..................112

7.3.10 Personal Area Networking........................112

7.3.10.1 Connecting the PAN User (PANU).......113

7.3.10.2 Conguring the NAP/GN ...............113

7.3.11 Printer .........................................113

7.3.12 Serial Port ......................................114

7.3.13 Bluetooth Synchronization .......................114

7.4 BlueSoleil User Guides ................................115

7.4.1 BlueSoleil Environment ..........................115

7.4.1.1 Main Window .........................115

7.4.1.1.1 Local Bluetooth Device.......115

7.4.1.1.2 Remote Bluetooth Devices....115

7.4.1.1.3 Bluetooth Service Buttons

of Remote Device ...........115

7.4.1.2 Service Window........................115

7.4.1.3 Menus ................................116

7.4.2 Device Congurations 117

7.4.2.1 Hardware Conguration ................117

7.4.2.2 Properties Conguration................117

7.4.3 Security Conguration...........................117

7.4.3.1 Pair / Un-pair Devices ..................117

7.4.3.1.1 How to pair with another

device .....................117

7.4.3.1.2 How to un-pair with

another device ..............117

7.4.3.2 General Security .......................117

7.4.3.2.1 Security Level...............117

7.4.3.2.2 Bluetooth Passkey ...........118

7.4.3.2.3 Data Encryption ............118

7.4.3.3 Managing Device Pairings ..............118

7.4.3.4 Local Services Security..................118

7.4.3.4.1 Local Services: ..............118

Appendix A — EAP Types...................................119

Appendix B — Encryption Settings ...........................121

1.0 Introduction

1.1 User and Product Safety

• DonotstareintothelaserorLEDbeamdirectlyorshineitintoeyes.

• Neverusestrongpressureontothescreenorsubjectittosevereim-

pact, as the LCD panel could become cracked and possibility cause

personal injury. If the LCD panel is broken, never touch the liquid

inside because the liquid irritates the skin.

• AlthoughthePDThaspassedthetestofIP65standardforwaterand

dust resistance, avoid prolonged exposure to rain or other concentrat-

ed moisture. Such condition exceeds the IP65 standard, and could

result in water or other contaminants entering into the PDT.

• UseonlytheoriginalapprovedACAdapterwiththePDT.Useofan

unapproved AC Adapter could result in electrical problems, or even

cause a re or electrical shock to the user.

• DonotdisassemblethePDT.Servicingshouldbedonebysupplier

only. If the PDT or accessories gets damaged due to wrong handling

or unauthorized repair, warranty is void. In case the warranty seals

are broken, warranty is void too.

• Makeregularlyback-upofallimportantdata.

• Undernocircumstancewillsupplierbeliableforanydirect,indirect,

consequential or incidental damages baring out of the use or inability

to use the hardware and soware and/or any data loss, even if sup-

plier has been informed about the possibility of such damages.

• LASERRADIATION:DONOTSTAREINTOBEAMCLASS2LA-

SER PRODUCT.

1.2 LED and LASER Safety

Information

• M9000isaClassIILED/LaserProduct.

• DONOTSTAREattheLED/Laserorshineintoeyes.

• Donotallowyoungchildrentousetheproductwithoutadultsuper-

vision.

• Donotreplace/repairtheLED/Laser;thesearenotuserreplaceable.

• DonotshinetheLED/Laseronashinyreectivesurface.

1.3 FCC Interference Statement

is equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. ese

limits are designed to provide reasonable protection against harmful

interference in a residential installation. is equipment generates uses

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

1.0 Introduction

–RADIATION EXPOSURE STATEMENT –

is equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. End users must follow

the specic operating instructions for satisfying RF exposure

compliance. To maintain compliance with FCC RF exposure

compliance requirements, please follow operation instruction

as documented in this manual.

is transmitter must not be co-located or operating in con-

junction with any other antenna or transmitter.

e availability of some specic channels and/or operational

frequency bands are country dependent and are rmware pro-

grammed at the factory to match the intended destination. e

rmware setting is not accessible by the end user.

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be de-

termined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate this equipment. is device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) is de-

vice may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause unde-

sired operation.

Complies with 21 CFR 1040.10 and 1040.11 except for deviations pur-

suant to Laser Notice No. 50, dated June 24, 2007.

Specic Absorption Rate (SAR) Information

e SAR Limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue.

e device has been tested against this SAR limit. e highest SAR value

reported under this standard during product certication for properly

worn on the body is 0.75W/kg. is device was tested for typical body-worn

operations with the back of the Tablet PC kept 0 cm from the body. Any

Changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

1.4 Industry Canada Statement

is Class B digital apparatus complies with Canadian ICES-003. Op-

eration is subject to the following two conditions:

1. is device may not cause interference and

2. is device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Can-

ada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : (1)

l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur

de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre

le fonctionnement.

Cet appareil numérique de la classe [B] est conforme à la

norme NMB-003 du Canada.

1.5 Battery Safety

Lithium-ion battery packs might get hot, explode, ignite and/or cause

serious injury if exploded by abusive using. Please follow the safety

warnings listed as below:

• Donotthrowthebatterypackinre.Donotexposethebatteryto

high temperatures.

• Donotconnectthepositivebatterypackwithnegativebatterypack

to each other with any metal object (like wire).

–WARNING –

Risk of explosion if battery is replaced by an incorrect type. Dis-

pose of used batteries according to the instructions.

1.0 Introduction

• Donotcarryorstorebatterypacktogetherwithmetalobjects.

• Donotpiercethebatterypackwithnailsordrills,strikethebattery

pack with a hammer, step on the battery pack or otherwise expose it

to strong impacts, shocks or excessive force.

• Donotsolderontothebatterypack.

• Donotexposebatterypacktoliquidorallowthebatterycontactsto

get wet.

• Do notdisassembleor modify thebatterypack.e batterypack

contains safety and protection measures, which, if damaged, may

cause the battery pack to generate heat, explode or ignite.

• Donotdischargethebatterypackusinganydeviceexceptforthespec-

ied device. When it is used in devices other than the specied de-

vices, the battery pack can be damaged or its life expectancy reduced.

If the device causesany abnormalcurrent to ow, it may cause the

battery pack to become hot, explode or ignite and cause serious injury.

• Intheeventthebatterypackleaksandtheuidgetsintoone’seye,do

not rub the eye. Rinse well with water and immediately seek medical

care.Ifleuntreated,thebatteryuidcouldcausedamagetotheeye.

1.6 Warranty Statements

DAP Technologies makes no representation or warranty with respect to

the contents hereof and specically disclaims any implied warranties of

merchantability or tness for any particular purpose.

e information in this manual is subject to change. DAP Technologies

reserves the right to update and modify the M9000 Series, its accesso-

ries, and manuals without notice.

No part of this manual may be copied, distributed, transmitted, tran-

scribed, stored in a retrieval system, or translkated in any form or by

any means, whether electronically or manually, without the express

written consent of DAP Technologies.

As manufacturer, DAP Technologies will replace or repair, at its dis-

cretion, any products that prove to be defective in either materials or

workmanship, for a period of one year following the purchase date of

the M9000 Series unit and for a period of ninety (90) days following the

purchase date of the M9000 accessories sold by DAP Technologies. e

warranty only covers the materials and workmanship.

is warranty does not cover damages caused by misuse, abuse, or ne-

glect,oroccurringduringshippingorstorage;thewarrantydoesnot

also cover any modication or servicing by anyone other than a DAP

Technologies Authorized Service Center.

DAP Technologies cannot be held responsible for any damage caused by

the misuse fo the M9000 Series unit or by any other soware or hard-

ware added to the M9000.

e operating system, MS-DOS®, Windows CE, and all other soware

sold or supplied by DAP Technologies are provided as is, without any

warranty, either express or implied.

In no event shall DAP Technologies be liable for any direct damage, indi-

rect damage, or damage of any kind, including but not limited to damag-

es on account of the loss of present or prospective prots arising out of or

in connection with the use or failure of performance of this product. No

claim may be made against DAP Technologies under this head, whether

arising from contractual, extra-contractual, or statutory liability.

e warranty allowed hereby excludes all other legal warranties related

to the quality of this product or its capacities to fulll specic purposes,

including all warranties granted by the United States Convention on

Contracts for the International Sale of Goods, the applciation of such

Convention being expressly excluded.

M9000 Series is a registered trademark of DAP Technologies. Microso

and MS-DOS® are registered trademarks of Microso Corporation.

1.7 Warranty and After Service

Should this Device be malfunctioned, please contact the original retailer

providing information about the product name, the serial number, and

the details about the problem.

1.8 Europe – EU Declaration of

Conformity

is device complies with the essential requirements of the R&TTE Di-

rective 1999/5/EC. e following test methods have been applied in or-

der to prove presumption of conformity with the essential requirements

of the R&TTE Directive 1999/5/EC:

• EN60950-1:2006—SafetyofInformationTechnologyEquipment

• EN50371:(2002-03)—Genericstandardtodemonstratethecom-

pliance of low power electronic and electrical apparatus with the ba-

sic restrictions related to human exposure to electromagnetic elds

(10 MHz - 300 GHz) -- General public

• EN 300 440-1 V1.4.1: (2008-05) — Electromagnetic compatibil-

ity and Radio spectrum Matters (ERM); Short range devices; Ra-

dioequipmenttobeusedinthe1GHzto40GHzfrequencyrange;

Part1: Technical characteristics and test methods

• EN 300 440-2 V1.2.1: (2008-05) — Electromagnetic compatibility

andradiospectrummatters(ERM);Wirelessmicrophonesinthe25

MHzto3GHzfrequencyrange;

• EN 301 908-1 V3.2.1: (2007-05) — Electromagnetic compatibility

andRadiospectrumMatters(ERM);BaseStations(BS),Repeaters

and User Equipment (UE) for IMT-2000 ird-Generation cellular

networks;Part1:HarmonizedENforIMT-2000,introductionand

common requirements, covering essential requirements of article

3.2 of the R&TTE Directive

• EN 301 489-1 V1.8.1: (2008-04) — Electromagnetic compatibility

andRadioSpectrumMatters(ERM);ElectroMagneticCompatibil-

ity(EMC)standardforradioequipmentandservices;Part1:Com-

mon technical requirements

• EN 301 489-3 V1.4.1 (2002-08) — Electromagnetic compatibility

andRadioSpectrumMatters(ERM);ElectroMagneticCompatibili-

ty(EMC)standardforradioequipmentandservices;Part3:Specic

conditions for Short-Range Devices (SRD) operating on frequencies

between 9 kHz and 40 GHz

• EN301489-7V1.3.1(2005-11)—Electromagneticcompatibilityand

Radio spectrum Matters -(ERM); ElectroMagnetic Compatibility

(EMC)standardforradioequipmentandservices;Part7:Specic

conditions for mobile and portable radio and ancillary equipment of

digital cellular radio telecommunications systems (GSM and DCS)

• EN301489-17V1.3.2 (2007-06)—Electromagneticcompatibility

andRadiospectrumMatters(ERM);ElectroMagneticCompatibility

(EMC)standardforradioequipment;Part17:Specicconditionsfor

2,4 GHz wide-band transmission systems, 5 GHz high performance

RLAN equipment and 5,8 GHz broadband data transmitting systems

• EN 301 489-19 V1.2.1 (2002-11) — Electromagnetic compatibility

andRadiospectrumMatters(ERM);ElectroMagneticCompatibil-

ity(EMC)standardforradioequipmentandservices;Part19:Spe-

cic conditions for Receive-Only Mobile Earth Stations (ROMES)

1.0 Introduction

operating in the 1,5 GHz band providing data communication

• EN 301 489-24 V1.5.1 (2010-10) — Electromagnetic compatibility

andRadiospectrumMatters(ERM);ElectroMagneticCompatibil-

ity(EMC)standardforradioequipmentandservices;Part24:Spe-

cic conditions for IMT-2000 CDMA Direct Spread (UTRA and E-

UTRA) for Mobile and portable (UE) radio and ancillary equipment

• EN 301 489-33 V1.1.1 (2009-02) — Electromagnetic compatibility

andRadiospectrumMatters(ERM);ElectroMagneticCompatibility

(EMC)standardforradioequipmentandservices;Part33:Specic

conditions for Ultra-Wide-Band (UWB) communications devices

• EN302065V1.2.1(2010-07)—Electromagneticcompatibilityand

RadiospectrumMatters(ERM);Short-RangeDevices(SRD)using

Ultra- Wide-Band technology (UWB) for communications purpos-

es;HarmonisedENcoveringtheessentialrequirementsofArticle3.2

of the R&TTE Directive

• EN301511V9.0.2(2003-3)—GlobalSystemforMobilecommuni-

cations(GSM);HarmonisedENformobilestationsintheGSM900

and GSM 1800 bands covering essential requirements under Article

3.2 of the R&TTE Directive (1999/5/EC)

• EN301893V1.5.1(2008-12)—BroadbandRadioAccessNetworks

(BRAN);5GHzhighperformanceRLAN;HarmonisedENcovering

the essential requirements of Article 3.2 of the R&TTE Directive

• EN300328V1.7.1(2006-02)—Electromagneticcompatibilityand

Radio spectrumMatters(ERM);Wide-bandtransmissionsystems;

Data transmission equipment operating in the 2,4 GHz ISM band

andusingwide-bandmodulationtechniques;HarmonisedENcover-

ing essential requirements under Article 3.2 of the R&TTE Directive

• EN62311:2008—Assessmentofelectronicandelectricalequipment

related to human exposure restrictions for electromagnetic elds (0

Hz-300 GHz)

• EN 55022:2006/A1:2007 — Information technology equipment —

Radio disturbance characteristics — Limits and methods of mea-

surement

• EN 55024:1998/A2:2003 — Information technology equipment —

Immunity characteristics — Limits and methods of measurement

1.9 European Union CE Marking

and Compliance Notices

Statements of Compliance:

English — is product follows the provisions of the European

Directive 1999/5/EC.

Danish — Dette produkt er i overensstemmelse med det europæiske

direktiv 1999/5/EC.

Dutch — Dit product is in navolging van de bepalingen van Europees

Directief 1999/5/EC.

Finnish — Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyk-

siä.

French — Ce produit est conforme aux exigences de la Directive

Européenne 1999/5/EC.

German — Dieses Produkt entspricht den Bestimmungen der Eu-

ropäischen Richtlinie 1999/5/EC.

Greek — To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής

Οδηγίας 1999/5/EC.

Spanish — Este producto cumple las disposiciones de la Directiva

Europea 1999/5/CE.

1.0 Introduction

1.10 Specications

Operating Sys-

tem

Windows® Embedded Standard 7,

Windows® CE 6.0 Professional

Processor Intel® Atom™ E660T 1.3 GHz

Memory 1 GB DDR2 SDRAM (2 GB optional)

Storage 16 GB solid state drive (32 or 64 GB optional)

Display

Sunlight-viewable

Hardened touchscreen

Landscape or portrait orientation

Passive stylus or nger operation

7-inch WVGA (800 x 480)

550 nits

Sensors

Light sensor for auto backlight adjustment

Position sensor (accelerometer) for portrait or land-

scape screen orientation

Keypad /

Buttons

3-key keypad (enter, navigation, function)

7 programmable keys (touchscreen)

Adjustable keypad backlight

Programmable trigger on underside

Communications

WLAN — Summit 802.11 a/b/g/n

WWAN — Gobi™ 3000: (CDMA, EVDO, UMTS,

GSM, GPRS, EDGE, DTM, HSPA, 3G: 14.4 / 5.76

Mbps, DOrA: 3.1 /1.8 Mbps)

GPS — Gobi™ 3000 (Standalone, XTRA, AGPS)

Zigbee® — Building Automation (BA)

Home Automation (HA)

Smart Energy (SE)

Wireless USB — Video/data

Bluetooth® — v2.1 + EDR Class II (BlueSoleil stack)

Input / Output

Power jack

1x RS-232

1x USB 2.0

Via dock connector:

1x USB 2.0

1x Ethernet

Barcode

Scanning

Short range barcode: 1D laser

Camera:5-MPcolorcamerawithash

Expansion Slots

SD card slot (supports up to 32 GB)

Multi-I/O interface:

2x USB 2.0

1x CAN bus 2.0 (interface only)

1x SDVO (Serial Digital Video Out)

2x RS-232

Audio

Speaker

Intel® HD Audio

3.2 mm stereo headset jack

Software

Windows® Embedded 7:

IE8, IIS 7.0, .NET 3.5, Remote Desktop, SQL, Backup

and Restore, Boot from VHD or USB, Power Manage-

ment, EWF and FBWF

Windows® CE 6.0 Professional:

ActiveSync, FTP client/server, IE 6.0, Viewers for Mi-

croso® Oce and PDF les, Inbox, Windows Media

Player, Remote Desktop, Terminal Services ,Voice Re-

corder, Backup and Restore, Barcode Scanner Utility

Power

Primary internal:

Li-ion battery, 7.4 V, 3000 mAh

Secondary battery:

Li-ion battery pack, 7.4 V, 3000 mAh

Input:

10–20 VDC, 2 A

Dimensions &

Weight

9.0 (L) x 7.3 (W) x 2.3 (H) inches [230 x 185 x 60 mm]

2.96 lb. [1346 g]

Regulatory

FCC Class B

RoHS

WEEE

Laser safety:

A21CFR1040.10

IEC/EN 60825-1

Environment

Operating temperature:

-4 to +122 °F [-20 to +50 °C]

Charging temperature:

32 to +104 °F [0 to +40 °C]

Storage temperature:

-22 to +158 °F [-30 to +70 °C]

Drop:

Multiple 6-foot (1.8-meter) drops to concrete

ESD:

15 kV air discharge, 8 kV direct discharge

Sealing:

IP67 certied

Humidity:

5%-95%, non-condensing

Vibration:

MIL-STD-810F

Inhaltsverzeichnis

Andere DAPAudio Tablette Handbücher

DAPAudio

DAPAudio M9700 Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung

MaxWest

MaxWest Nitro Phablet 9 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Aaeon

Aaeon RTC-1000A1 Bedienungsanleitung

Trevi

Trevi TAB 9 C8 Bedienungsanleitung