Dapper Design ION Bedienungsanleitung
DAPPER DESIGN ION USER GUIDE
GETTING STARTED
ION is a compact USB Type-C rechargeable EDC pocket flashlight with 7
modes, mode memory, a reliable side button switch, removable pocket
clip, and a strong magnetic tailcap.
FLASHLIGHT OPERATION
ION comes with two sets of modes each with three levels of brightness per mode, a mode-memory
feature, and a self-defense strobe.
LOCK-OUT: ION is equipped with a LOCK-OUT feature to prevent accidental activation. We recommend
locking out the flashlight when you’re not using it. From OFF, click 5 times quickly to LOCK-OUT. ION will
blink to indicate that it has been locked. To UNLOCK, click five times quickly again.
MODES CHART:
Mode
Lumens
Runtime
Low
30
3 hours
Medium
130
1.5 hours
High
650
10 minutes
Moonlight Low
1
40 hours
Moonlight Medium
3
25 hours
Moonlight High
5
18.5 hours
Strobe
650
10 minutes
REGULAR MODE OPERATION: While the flashlight is OFF, press and hold the switch down for half a
second and release when the light turns on. You are now in Mode 1: Low Power. Single clicks will
advance to the next mode; Mode 1 > Mode 2 > Mode 3, and back to Mode 1. Press and hold down on
any mode to turn OFF and to store that mode into mode memory. The next time you power on, it will
start from that last mode..
MOONLIGHT MODE OPERATION: From OFF, click twice quickly for Moonlight Mode 1: Low Power. Single
clicks will advance to the next mode; Moonlight Mode 1 > Moonlight Mode 2 > Moonlight Mode 3, and
back to Moonlight Mode 1. Press and hold down on any moonlight mode to turn OFF and to store that
last mode into mode memory. The next time you power on to moonlight, it will start from that last
mode.
SELF-DEFENSE STROBE: Used for self-defense, the strobe mode can temporarily blind an assailant and
may potentially stop a threat. Click three times from any mode. Press and hold to turn OFF. Note: This
mode cannot be stored in mode memory.
LED POWER INDICATOR LIGHT: The RGB LED indicator around the side button switch can be used to
determine current power remaining. Blinking red LED indicates that the flashlight battery has fallen
below 3.1V and needs to be recharged. While recharging, you will see a green LED indicator. The LED will
turn blue when it is fully recharged.
RECHARGING YOUR ION: Use the supplied USB Type-C charging cable to recharge ION. Insert the larger
standard USB end into a power source of your choice such as a computer/laptop USB port, or an AC
adapter plug that you would use to recharge your mobile phone, and then plug the USB Type-C end into
your ION.
WARNINGS
Never look directly into the flashlight or at the LED. Even at lower settings, ION’s LED can be extremely
bright: at its 650-lumen maximum, ION can temporarily blind and cause eye injuries.
The self-defense strobe can cause seizures. Please use with extreme caution.
WARRANTY
Dapper Design warrants that its products will be free from defects in material and workmanship for 2
years. Dapper Design’s liability is limited to the original purchase price of the product and does not cover
normal wear and tear, or damage resulting from abuse, alterations, unauthorized repairs and/or
modifications, cosmetics, color variations, or batteries.
This limited 2-year warranty excludes lithium-ion batteries, chargers, switches, and electronics, which
have a 1-year warranty with proof of purchase. Problems that are caused by abuse, misuse, water
damage, or an act of God (such as a flood) are not covered. Consequential and incidental damages are
not recoverable under this warranty.
To obtain warranty service, please contact us by email or use our online contact form. You will need to
provide proof of purchase to obtain an RMA number. Package the item(s) being returned and include an
explanation of the issue, the RMA number, your name, address, and contact number.
Mail approved warranty claims to:
Dapper Design
6285 E Spring Street #552
Long Beach, CA 90808 USA
© 2021 Dapper Design, LLC. All Rights Reserved.
User Guide Revision 1.0
Inhaltsverzeichnis
Andere Dapper Design Taschenlampe Handbücher
