Data Video MCU-100 Bedienungsanleitung

37 | MCU-100/200 Camera Controller | www.datavideo.us

Control Cameras from a Single Location

Save tons of time adjusting your Panasonic cameras with the

MCU-100 or MCU-200(1RU Rack-Mounted) Camera Controller.

Imagine this — You’re almost ready to shoot. It’s time to make sure

each camera is congured properly. But wait, how will you check

the cameras’ outputs on the multi-view and adjust them at the same

time? If you’re by yourself, you can look at your multi-view monitor,

then walk to the camera, make an adjustment, and walk back to

the multi-view. You COULD do this many times until all the cameras

match each other perfectly on the screen. After the fth trip to your

sixth camera, you’re nally done, but you’ve already spent at least

an hour doing adjustments.

But what if you have a crew? You could have one of your staff

members walk to each camera while you stay at the multi-view,

giving him or her directions by intercom. That would be a bit

faster.

BUT wouldn’t it be GREAT if you could do all the camera

adjustments yourself without having to leave your multi-view

monitor? Now you can, with the MCU-100/200 Camera

Controller.

Control up to 4 Panasonic Video Cameras

The controller allows a distance of up to 300 meters between

the cameras and the controller using the included AD-1

Adapters. The interface between the MCU-100/200 & AD-1

is a RS-422 differential line. You can also use CAT-5e/6

cable up to 3280.84 feet (1000 meters).

MCU-100/200 Panasonic Cam Compatibility

• AG-HPX255 • AG-HPX370

• AG-HPX500 • AG-HPX600

Camera Controller Functions

• Rewind

• Fast Forward

• Record

• Stop

• Play

• Record Check

• Master Pedestal Up/Down

• Auto Knee Off/On

CAMERA CONTROLLER FOR PANASONIC CAMERAS

MCU-100/200 MULTI-CAMERA CONTROLLERS

• Color/Brightness Gain

• Iris

• Shutter Synchro-Scan / Fixed / Off

• Auto White Balance /

Auto Black Balance

• White Balance A / B / Preset

(Saved Settings on Camera)

MCU-100

Controller »

AD-1

Adapter

(4x Included) »

$2,000

MSRP

www.datavideo.us | MCU-100/200 Camera Controller | 38

User1/User2 Shortcut Buttons

The MCU-100 /200 is able to use the assignable camera

shortcut buttons (Typically User1 / User2 buttons on the

camera).

Saving and Recalling Memory Settings

Additionally, the MCU-100/200 can store and recall its

own memory settings (settings saved in the MCU-100/200

itself), with 3 memory banks available.

Special Rotary Knob for Iris

On some other camera controllers, a single knob stores a

position value. Let’s say the position is “1.” When switching

from camera1 (which is on iris setting “1”) to camera2, the

setting will automatically change to 1 because that’s where

the iris knob’s setting is on the controller. The problem

is that it’s impossible to control individual iris settings

between cameras. However, on the MCU-100/200, the

iris knob is not a position knob, but instead it’s a rotary

knob that increases or decreases the current setting. So for

example, with the MCU-100/200, you can have camera1

selected, which is at iris position 1, then switch to camera2.

Camera2 will be at whatever setting it is at currently, and

the knob will be used to increase or decrease the setting.

Then, you can switch to the next camera and do the same.

In this way, you can tune each camera to have their own

individual iris settings.

Connecting the MCU-100/200

First, connect the included AD-1 adapter to the camera’s

CAM/BS port. Then, connect an ethernet cable from the

AD-1 to the MCU-100/200. Setting parameters can be

seen by connecting monitors to each AD-1 adapter using

a CVBS cable. MCU-100 and MCU-200 utilize locking

power connectors.

The diagram below shows a typical connection schematic

where the MCU-100/200 controls four cameras.

« MCU-200 Rack-Mounted Controller $2,000

MSRP

What’s in the Box?

• MCU-100 or MCU-200

Controller

• 4x AD-1 Adapters

• 1x Power Adapter

• 1x Quick Start Guide

Andere Handbücher für MCU-100

Dieses Handbuch passt für folgende Modelle

Andere Data Video Controller Handbücher

Data Video

Data Video RMC-200 Bedienungsanleitung

Data Video

Data Video LD-1 Bedienungsanleitung

Data Video

Data Video MCU-100 Bedienungsanleitung

Data Video

Data Video RMC-300C Bedienungsanleitung

Data Video

Data Video RMC-180 MARK II Bedienungsanleitung

Data Video

Data Video CCU-100J Bedienungsanleitung

Data Video

Data Video TPC-700 Bedienungsanleitung

Data Video

Data Video RMC-400 Bedienungsanleitung

Data Video

Data Video RMC-180 Bedienungsanleitung

Data Video

Data Video RMC-185 Bedienungsanleitung

Data Video

Data Video TPC-700P Bedienungsanleitung

Data Video

Data Video RMC-150 Bedienungsanleitung

Data Video

Data Video TPC-700 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch