Data Video TWP-10 Bedienungsanleitung

TWP-10

4K VIDEO WALL

PROCESSOR 2x2

Instruction Manual

Table of Contents

FCC COMPLIANCE STATEMENT ........................................................................................................................3

WARNINGS AND PRECAUTIONS.......................................................................................................................3

WARRANTY......................................................................................................................................................4

STANDARD WARRANTY ............................................................................................................................................ 4

THREE YEAR WARRANTY........................................................................................................................................... 4

DISPOSAL.........................................................................................................................................................5

1. INTRODUCTION .......................................................................................................................................6

FEATURES .............................................................................................................................................................. 6

2. CONNECTIONS AND CONTROLS ...............................................................................................................7

FRONT PANEL......................................................................................................................................................... 7

REAR PANEL........................................................................................................................................................... 7

3. HOW TO SET UP THE TWP-10 ..................................................................................................................9

4. SOFTWARE CONTROL PROGRAM ..........................................................................................................10

4.1 START THE SOFTWARE CONTROL PROGRAM .................................................................................................. 10

4.2 PROGRAM INTERFACE ............................................................................................................................... 11

I. Connection Status ............................................................................................................................... 11

II. Quick Setting Selection........................................................................................................................ 11

III. EDID (Extended Display Identification Data)................................................................................... 15

IV. Advanced Setting ............................................................................................................................ 17

V. 4K Setting ............................................................................................................................................ 18

VI. IP Configure..................................................................................................................................... 18

VII. Info.................................................................................................................................................. 19

VIII. Refresh ............................................................................................................................................ 19

5. FIRMWARE UPDATE ..............................................................................................................................20

6. FREQUENTLY-ASKED QUESTIONS ..........................................................................................................21

7. DIMENSIONS & WEIGHT ........................................................................................................................22

8. SPECIFICATIONS ....................................................................................................................................23

SERVICE AND SUPPORT..................................................................................................................................24

Disclaimer of Product & Services

The information offered in this instruction manual is intended as a guide only. At all times, Datavideo

Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies

cannot exclude that some information in this manual, from time to time, may not be correct or may be

incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo

Technologies always recommend that you double check the information in this document for accuracy before

making any purchase decision or using the product. Datavideo Technologies is not responsible for any

omissions or errors, or for any subsequent loss or damage caused by using the information contained within

this manual. Further advice on the content of this manual or on the product can be obtained by contacting

your local Datavideo Office or dealer.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Warnings and Precautions

1. Read all of these warnings and save them for later reference.

2. Follow all warnings and instructions marked on this unit.

3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or

aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this unit in or near water.

5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing

serious damage.

6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To

ensure safe and reliable operation of this unit, and to protect it from overheating, do not

block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar

surface, as the ventilation openings on the bottom of the cabinet will be blocked. This

unit should never be placed near or over a heat register or radiator. This unit should not

be placed in a built-in installation unless proper ventilation is provided.

7. This product should only be operated from the type of power source indicated on the

marking label of the AC adapter. If you are not sure of the type of power available,

consult your Datavideo dealer or your local power company.

8. Do not allow anything to rest on the power cord. Do not locate this unit where the

power cord will be walked on, rolled over, or otherwise stressed.

9. If an extension cord must be used with this unit, make sure that the total of the ampere

ratings on the products plugged into the extension cord do not exceed the extension

cord rating.

10. Make sure that the total amperes of all the units that are plugged into a single wall

outlet do not exceed 15 amperes.

11. Never push objects of any kind into this unit through the cabinet ventilation slots, as

they may touch dangerous voltage points or short out parts that could result in risk of

fire or electric shock. Never spill liquid of any kind onto or into this unit.

12. Except as specifically explained elsewhere in this manual, do not attempt to service this

product yourself. Opening or removing covers that are marked “Do Not Remove” may

expose you to dangerous voltage points or other risks, and will void your warranty. Refer

all service issues to qualified service personnel.

13. Unplug this product from the wall outlet and refer to qualified service personnel under

the following conditions:

a. When the power cord is damaged or frayed;

b. When liquid has spilled into the unit;

c. When the product has been exposed to rain or water;

d. When the product does not operate normally under normal operating conditions.

Adjust only those controls that are covered by the operating instructions in this

manual; improper adjustment of other controls may result in damage to the unit and

may often require extensive work by a qualified technician to restore the unit to

normal operation;

e. When the product has been dropped or the cabinet has been damaged;

f. When the product exhibits a distinct change in performance, indicating a need for

service.

Warranty

Standard Warranty

•Datavideo equipment are guaranteed against any manufacturing defects for one year

from the date of purchase.

•The original purchase invoice or other documentary evidence should be supplied at the

time of any request for repair under warranty.

•The product warranty period beings on the purchase date. If the purchase date is

unknown, the product warranty period begins on the thirtieth day after shipment from a

Datavideo office.

•Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not

covered under warranty.

•Viruses and malware infections on the computer systems are not covered under

warranty.

•Any errors that are caused by unauthorized third-party software installations, which are

not required by our computer systems, are not covered under warranty.

•All mail or transportation costs including insurance are at the expense of the owner.

•All other claims of any nature are not covered.

•Cables and batteries are not covered under warranty.

•Warranty only valid in the country or region of purchase.

•Your statutory rights are not affected.

Three Year Warranty

•All Datavideo products purchased after July 1st, 2017 are qualified for

a free two years extension to the standard warranty, providing the

product is registered with Datavideo within 30 days of purchase.

•Certain parts with limited lifetime expectancy such as LCD panels, DVD

drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera

module, PCIe Card are covered for 1 year.

•The three-year warranty must be registered on Datavideo's official website or with your

local Datavideo office or one of its authorized distributors within 30 days of purchase.

Disposal

For EU Customers only - WEEE Marking

This symbol on the product or on its packaging indicates that this

product must not be disposed of with your other household waste.

Instead, it is your responsibility to dispose of your waste equipment by

handing it over to a designated collection point for the recycling of waste

electrical and electronic equipment. The separate collection and

recycling of your waste equipment at the time of disposal will help to

conserve natural resources and ensure that it is recycled in a manner that protects human

health and the environment. For more information about where you can drop off your

waste equipment for recycling, please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

CE Marking is the symbol as shown on the left of this page. The letters

"CE" are the abbreviation of French phrase "Conformité Européene"

which literally means "European Conformity". The term initially used was

"EC Mark" and it was officially replaced by "CE Marking" in the Directive

93/68/EEC in 1993. "CE Marking" is now used in all EU official documents.

1. Introduction

The TWP-10 4K Video Wall Processor 2x2 is a powerful, cost effective, and truly real time

data/video processor for multiple flat panel displays or projectors. Any setups for the

display layout can be virtually possible with the control software.

The TWP-10 allows the user to input HDMI video up to 4K2K@60Hz 4:4:4. The embedded

scaler converts signals from HDMI source to match the original resolution of monitors, flat

panel displays, projectors and user-selectable output settings up to Widescreen Ultra

eXtended Graphics Array (WUXGA 1920x1200).

The TWP-10 sends the processed video through HDMI interface to the connected monitors /

projectors based on the display layout setup. The layout can be readily modified for various

applications such as digital signage, video broadcast, education and surveillance system as

well as visual effect optimization.

That’s Datavideo, sharing the value!

Features

•Four HDMI outputs with resolution from 640x480 to 1920x1200

•Supports HDMI input from 640x480 to 4K2K@60 (YUV 4:4:4), interlaced or progressive

•HDCP compliant

•Image parameters and layouts are automatically saved in flash memory of the device

and can be recalled for later use

•Several image parameters and layouts can be saved in computers and loaded for later

use

•Firmware upgradable for new features and technology enhancements

•Supports IR remote control

•Software control through USB and Ethernet

•Resize, position, zoom for each HDMI output video

•User-selectable output settings, up to 1920x1200

•Supports remote control of switching between 1x1, 2x2, 1x3 rotate, and 1x4 rotate

modes

•Supports independent input rotation at the resolution up to 1080p

•4K2K60 (YUV 4:4:4) can be divided and displayed on four 1080p60 TVs (2x2 layout only)

•Supports individual propagation delay on each display to achieve the best visual

perception

•Supported resolutions

Input Resolution

Output Resolution

720x480@30Hz

720x480@60Hz

720x576@30Hz

720x576@60Hz

1280x720@60Hz

1920x1080@30Hz

1920x1080@60Hz

4K2K@30Hz

4K2K@60Hz (4:2:0 10 bits)

4K2K@60Hz (4:2:2 10 bits)

4K2K@60Hz (4:4:4 8 bits)

640x480@60Hz

720x480@60Hz

720x576@60Hz

800x600@60Hz

1024x768@60Hz

1280x720@60Hz

1280x768@60Hz

1280x960@60Hz

1280x1024@60Hz

1366x768@60Hz

1440x900@60Hz

1680x1050@60Hz

1920x1080@60Hz

1920x1200@60Hz

1600x1200@60Hz

2. Connections and Controls

Front Panel

Lightly touch the power button on the front panel of the device to turn ON the TWP-10.

Rear Panel

1. Power ON/OFF Switch

Turn this power switch ON to enter the device into

STANDBY mode.

2. DC Power Jack

DC in socket connects the supplied 12V PSU. The

connection can be secured by screwing the outer

fastening ring of the DC In plug to the socket.

3. USB Virtual COM Port

Connect this port to the PC for access to the

device user interface.

4. Ethernet Control Port

Connect this port to the PC for access to the

device user interface.

5. Stereo Audio Output L/R

RCA Stereo for analogue audio output.

6. HDMI Input

Connect the HDMI video source to this port.

7. DIP Switch

ON (UP): Operation mode

OFF (DOWN): Firmware update mode

8. HDMI Outputs

Connect video display devices to the respective

HDMI output ports.

3. How to set up the TWP-10

1. Set the TWP-10 as the master device.

2. Connect an HDMI video source to the HDMI input of the TWP-10.

3. Connect all display devices to the respective HDMI outputs of the TWP-10.

4. Connect the 12V 2A DC power adapter to the TWP-10.

4. Software Control Program

The TWP-10 comes with a software control program which runs under Microsoft Windows

98, 2000, XP, 7, 8. Simply click the program icon after it is installed on your operating

system. However, before you start your software control program, please make sure you

have secured the connection between the PC and the TWP-10. The sections below will take

you through the system connection setup step by step.

Note: Under Microsoft Windows 7, please run as an administrator.

4.1 Start the Software Control Program

The following dialog window will pop up upon execution of the software control program.

There are basically two ways to connect the TWP-10. You can either connect via the USB

virtual COM port or the Ethernet port.

•USB: Select the appropriate virtual COM

port and click the OK button.

•Ethernet: Enter the TWP-10 device IP

address and click the OK button.

After the software control program is loaded, you will see the control interface as shown

below.

Inhaltsverzeichnis

Andere Data Video Prozessor Handbücher

Data Video

Data Video MS-VGB1K Bedienungsanleitung

Beliebte Prozessor Handbücher anderer Marken

FALCON THREE

FALCON THREE TV SDI Bedienungsanleitung

Vdwall

Vdwall LVP8601 Bedienungsanleitung

Pro ceed

Pro ceed PDP 3 Bedienungsanleitung

Intel

Intel ARCHITECTURE IA-32 Bedienungsanleitung

Fastwel

Fastwel CPC310 Bedienungsanleitung

Usl

Usl JSD-60 Bedienungsanleitung

ALLEN & HEATH

ALLEN & HEATH DR128 Bedienungsanleitung

Harman Kardon

Harman Kardon AVP-2 Bedienungsanleitung

dbx

dbx Zone Pro 640 Bedienungsanleitung

Fastwel

Fastwel CPC309 Bedienungsanleitung

BBE

BBE 822 Bedienungsanleitung

NAIM

NAIM AV2 Bedienungsanleitung

GrandTec

GrandTec Grand Magic Guard III Bedienungsanleitung

Intel

Intel 80386 Kurzanleitung

TECshow

TECshow DSP-2600 W Bedienungsanleitung

Topp Music Gear

Topp Music Gear RT-DRIVE DLM-206 Bedienungsanleitung

NEC

NEC IPS-4000 Bedienungsanleitung

Texas Instruments

Texas Instruments Sitara AM335x Bedienungsanleitung