Data Video SE-2000R Bedienungsanleitung

HD Digital Video Switcher

SE-2000R

Quick Start Guide

www.datavideo-tek.com

Table of Contents

What’s in the box?......................................................................................................................2

Introduction ................................................................................................................................2

Product Overview.......................................................................................................................2

Features.....................................................................................................................................2

Front Panel...........................................................................................................................3

Rear Panel ...........................................................................................................................6

System Configuration.................................................................................................................8

Configuration Utility Service .....................................................................................................19

1. Device Setup..................................................................................................................19

2. LOGOS Setup................................................................................................................20

3. Clock Font......................................................................................................................21

4. Background....................................................................................................................22

5. Names............................................................................................................................23

Dimension................................................................................................................................24

Specification.............................................................................................................................25

Service & Support ....................................................................................................................26

What’s in the box?

1 x XLR 4P-F to DC Jack CAD-02

1 x Switching AD DC12V/1.5A

1 x SE-2000R Instruction Manual

Introduction

Thank you for purchasing SAE-2000R Digital Video Switcher. We hope you will be pleased with your purchase,

and with what you can achieve with this advanced piece of technology. In order to get the most out of your new

switcher, we recommend that you spend some time getting familiar with this manual, as it will describe in detail all

the functions of this unit. In addition, you’ll find some useful background information on video.

Product Overview

The SE-2000R is an HD input, digital processing live video switcher. The SE-2000R includes 6 groups of video

inputs (4x BNC connector for HD -SDI & 2 x DVI), and 4 x video outputs PGM (2x HD-SDI output, 1x HD-YUV

output, and, PVW (1x DVI-D output), PVW output include 6x monitoring screen and 1x PVW screen and 1x PGM

screen. These allow easy monitoring of inputs and/or outputs. A built in frame synchroniser ensures glitch free

switching of non synchronised inputs. Additional sockets include, Tally light output, RS-232 interface for firmware

update.

Features

FULL HD:

Input: 4x HD-SDI and 1x DVI-D input or 3x HD-SDI, and 2x DVI-D input (Options)

Output: PGM: Full HD output, HD-SDI and HD-YUV format

PVW: DVI-D

PVW out with multi image and digital clock display

DVI-D for power point presentation, simple title, support full HD input.

LOGO insertion, up to 14 logos pre-store and LOGO’s size is 256x192 pixels

LUMA key

PIP, FRZ, Black image

5 individual speed keys for instant selection with take effect

5 users preset memory

Tally output

RS-232 control

DC 12V input

13 Transition effect + soft border

Front Panel

POWER

Switches the power On / Off.

Logo Setting

Select SE-2000R Logo1, Logo2 or Clock Functions on the screen.

LUMA PVW / LUMA PGM

Step 1: Select LUMA source from sub source.

Step 2: Press LUMA PVW or LUMA PGM key.

This function only key LUMA on the PVW or PGM display channel.

1. Power

2. Logo Setting

3. LUMA PVW / LUMA PGM

4. Main / Sub Source

5. Effect Speed

6. TAKE

7. CUT

8. Video Effects

9. Menu and Controls

SET

SET key function: press SET key →press INV key →press ENTER key.

This function is retrieves previous resolution mode of output signal to multi

screen in case when the monitor doesn’t support a new mode selected from

SE-2000R MENU.

PIP PVW / PIP PGM

Step 1: Press SET key.

Step 2: Press PIP PVW key.

Step 3: Select PIP source from sub source CH1~4.

Step 4: Press PIP PVW or PIP PGM key.

This function is show PIP window on the PVW or PGM display channel.

PIP effect, which stands for Picture in Picture, you can set different sizes and

position.

Main Source

Used to select which of the four video input channels or background is sent

to the Main video output. For more information, see Video Source (Page 6).

Sub Source

Used to select which of the four video input channels or background will be

ransitioned to or used as a sub source in an effect.

Effect Speed

Selectable of five different speeds for transition effect.

CUT

Change the main/sub source immediately.

TAKE

Take the effect by preset speed.

Video Effects

10 effect keys, for more information, see Transition Effects (Page 6).

Menu and Controls

Menu button is SE-2000R functions configuration and setting, press the up,

down, left, right arrow button move to another control, and ENT button to

confirm the setting.

Video Source

Selecting the Main and Sub Video Sources is the first thing to do when setting up the SE-2000R.

The source you select (by pressing one of the buttons; a bright red LED on the selected button lights for

confirmation) on the Main Source bus is what is sent to the Video output. This means that you can perform cuts

between sources by simply pressing different buttons.

The Sub Source selection determines which input will be transitioned to when using any of the transition controls

and provides the video for Picture in Picture and Chroma Key functions.

Transition Effects (Reversible)

Right Down to Left High / Left High to Right Down

Right to Left / Left to Right

Top to Bottom / Bottom to UP

Left Down to Right High / Right High to Left Down

Inside Out / Outside In

Middle extend U/D / Middle extend L/R

Controls the border softness of the effect transforming.

Also known as a fade, is a transition wherein all the pixels of one source are replaced by all the

pixels of another, at a smooth rate, and at the same time.

Inverse effect move way.

Press the button once and the video freezes, press it again, and it returns to the selected

source in full motion.

Rear Panel

1. HD- SDI IN

2. HD- SDI IN / DVI-D IN

3. DVI-D IN

4. TALLY

5. RS-232

6. HD- SDI OUT

7. HD- SDI YUV OUT

8. MULTIVIEWER OUT

9. DC IN

HD- SDI IN

HD SDI Signal Input (Digital Inputs 1 to 3).

HD- SDI IN / DVI-D IN

The digital Inputs 4 has two kinds of digital modes for use (HD-SDI & DVI) you

can select the mode in MENU function.

For more information, see INPUT 4 MODE (Page 14).

DVI-D IN

DVI-I Signal Input (Digital Input 5).

TALLY

Tally out socket. This supplies tally light information up to seven buttons of

main source, and other seven button of sub source.

RS-232

9-pin serial port standard RS-232 interface.

Connect PC to update firmware.

HD- SDI OUT

4:2:2 SDI Video data supports SMPTE 292M standard at 1.5G Mbps.

SDI transfers professional level video signals and it’s can connect to long

distance transmission systems.

HD- YUV OUT

HD- YUV component analogue output connecters.

MULTIVIEWER OUT

DVI-D digital signal preview output connecter (PVW).

DC IN

DC in socket connect the supplied 12V 5A PSU to this socket. The connection

can be secured by screwing the outer fastening ring of the DC In plug to the

socket.

System Configuration

Press on the MENU button for system configuration, press the UP, DOWN,LEFT, RIGHT

button to select an item and press the ENT to confirm the setting.

1. USER’S PROFILE

- Press the MENU button and select item 1 for USER’S PROFILE.

- Press the arrows button to select an item and press the ENT to confirm the setting.

- 6 sets group (0~5) of user’s setting and recall.

*After SE-2000R firmware upgrade, you need to reload your (logo, background, name…etc) files to SE-2000R.

USER’S PROFILE

0 ~ 5

INTPUT SETTINGS

PIP SETTING

LUMA SETTINGS

LOGOS

MODE SETTING

MONITOR MODE

INPUT 4 MODE

MASTER USER SETTING

SOFT EDGE

AUTO TAKE SPEED

BACKGROUND

BLACK & BARS POS.RIGHT

FACTORY SETTINGS

CLOCK SETTINGS

2. INTPUT SETTINGS

- Press the MENU button and select item 2 for INTPUT SETTINGS.

- Press the arrows button to select an item and press the ENT to confirm the setting.

- BRIGHTNESS: adjustment range from -7 to +7

- CONTRAST: adjustment range from -7 to +7

- SATURATION: adjustment range from -7 to +7

USER’S PROFILE

INTPUT SETTINGS

BRIGHTNESS

-7 ~ +7

CONTRAST

-7 ~ +7

SATURATION

-7 ~ +7

MASTER USER SETTING

●

PIP SETTINGS

LUMA SETTINGS

LOGOS

MODE SETTING

MONITOR MODE

INPUT 4 MODE

MASTER USER SETTING

SOFT EDGE

AUTO TAKE SPEED

BACKGROUND

BLACK & BARS POS.RIGHT

FACTORY SETTINGS

CLOCK SETTINGS

Inhaltsverzeichnis

Andere Data Video Schalten Handbücher

Data Video

Data Video SE-500 Bedienungsanleitung

Data Video

Data Video ITC-100 KF1000 Bedienungsanleitung

Data Video

Data Video SE-500MU4K Bedienungsanleitung

Data Video

Data Video HS-1600T Bedienungsanleitung

Data Video

Data Video SE-2200 Bedienungsanleitung

Data Video

Data Video DAC-10 Technisches Datenblatt

Data Video

Data Video DAC-200 Bedienungsanleitung

Data Video

Data Video HS-500 Bedienungsanleitung

Data Video

Data Video HS-1200 Bedienungsanleitung

Data Video

Data Video SE-700 Bedienungsanleitung

Data Video

Data Video SE-500HD Bedienungsanleitung

Data Video

Data Video SE-1200MU Bedienungsanleitung

Data Video

Data Video DAC-10 Technisches Datenblatt

Data Video

Data Video SE-800 Gebrauchsanweisung

Data Video

Data Video SE-650 Bedienungsanleitung

Data Video

Data Video RMC-120 Bedienungsanleitung

Data Video

Data Video SE-500 Bedienungsanleitung

Data Video

Data Video DAC-10 Bedienungsanleitung

Data Video

Data Video KMU-300 Bedienungsanleitung

Data Video

Data Video SE-900 Bedienungsanleitung

Data Video

Data Video SE-700 Bedienungsanleitung

Data Video

Data Video SEB-1200 Bedienungsanleitung

Data Video

Data Video iCast 10NDI Bedienungsanleitung

Data Video

Data Video SE-500MU Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung