Datalogic DLR-DK001-EU Installations- und Betriebshandbuch

DLR-DK001-XX Family

RFID UHF Desktop Reader EU/US

Product Reference Guide

Datalogic S.r.l.

Via S. Vitalino, 13

40012 Calderara di Reno

Italy

Tel. +39 051 3147011

Fax +39 051 3147205

contents of this documentation or the procedures described

therein may be reproduced or transmitted in any form or by

any means without prior written permission of Datalogic

S.p.A. and/or its affiliates. Owners of Datalogic products are

hereby granted a non-exclusive, revocable license to

reproduce and transmit this documentation for the

purchaser's own internal business purposes. Purchaser shall

not remove or alter any proprietary notices, including

ensure that all notices appear on any reproductions of the

documentation. Should future revisions of this manual be

published, you can acquire printed versions by contacting your

Datalogic representative.

Electronic versions may either be downloadable from the

Datalogic website (www.datalogic.com) or provided on

appropriate media. If you visit our website and would like to

make comments or suggestions about this or other Datalogic

publications, please let us know via the "Contact Datalogic"

page.

Disclaimer

Datalogic has taken reasonable measures to provide

information in this manual that is complete and accurate,

however, Datalogic reserves the right to change any

specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of

Datalogic S.p.A. in many countries, including the U.S.A. and

the E.U. DLR-DK001 is a trademark of Datalogic S.p.A. and/or

its affiliates. All other trademarks and brands are property of

their respective owners.

Product Reference Guide i

Table of Contents

Description ....................................................................................... 1

Models P/N .....................................................................................1

General Features ............................................................................. 2

Using the DLR-DK001-XX ..............................................................2

The DLR-DK001-XX Top Panel ......................................................3

Acoustic ............................................................................................3

Accessories ......................................................................................3

Technical Specifications ........................................................4

Reader-Tag Link Profiles ................................................................5

Radiation Patterns ..........................................................................6

Getting Started ................................................................................7

Driver Installation for Serial Port Emulator ........................7

Connecting to the DLR-DK001-XX .....................................10

Firmware Upgrade ...............................................................10

Mechanical Specification ..............................................................11

Datalogic Limited Factory Warranty ...........................................12

Services and Support ....................................................................15

ii DLR-DK001-xx

NOTES

Product Reference Guide 1

RFID Reader DLR-DK001-XX

Description

The DLR-DK001-XX is a multipurpose desktop UHF RFID

reader. It is offered in two different models to fit the

different frequency standards in the EU and US regions.

It is compliant with UHF RFID ISO 18000-63 and EPC Class

1 Gen 2 standards. The Reference Document is:

“EPC Radio-Frequency Identity Protocols Class-1

Generation-2 UHF RFID”, Protocol for Communications at

860 MHz – 960 MHz, Version 2.0.1 (April 23, 2015).

The DLR-DK001-XX has an integrated antenna suited for

short to medium range applications. This reader is

powered and controlled by a USB cable that allows it to

read EPC codes tags in an easy desktop environment.

Thanks to its low profile and size, the DLR-DK001-XX

reader is the right choice for various applications such as

point-of-sales, document tracking, RFID Tag programming

and control stations.

It can be used as a building block for smart shelves and

displays. The two versions are covering most of the RFID

needs worldwide (retailers, forwarders, warehouses, etc).

Models P/N

Model P/N RF carrier frequency range

DLR-DK001-EU 865.6 ÷ 867.6 MHz

DLR-DK001-US 902.0 ÷ 928.0 MHz

General Features

2DLR-DK001-xx

General Features

The DLR-DK001-XX is mainly dedicated to fixed Desktop

setups, but a fixed wall-mount point-of-access is possible

as well. The Desktop configuration allows it to interact

directly with legacy application, office automation SW and

many other generic service and maintenance applications.

The integrated circular antenna makes the radiation

pattern a good compromise in terms of directivity. This

means practically no orientation problems will be

experienced for a population of UHF Tags being located in

its proximity.

Special attention has been given to minimizing the mean

current consumption by limiting the active read time.

The USB 2.0 is seen as a serial Virtual Com Port (VCP). All

machines with Windows OS versions, Linux vers. 2.40 and

greater, having proper VCP drivers could be interfaced. The

port is used for powering, too, so it must be connected to

500 mA rated USB Ports.

Using the DLR-DK001-XX

The DLR-DK001-XX normal behavior is to capture all the

sensed identification codes associated to the reachable

UHF Tags. The reader’s Top Panel is the User Interface. All

the commands are issued from the host’s application.

Figure 1. DLR-DK001-XX Top Panel

The DLR-DK001-XX Top Panel

Product Reference Guide 3

The DLR-DK001-XX Top Panel

With reference to the Fig. 1 above, here is a Table with the

three main elements of the User Interface located on the

Top Panel:

Table 1- DLR-DK001 Top Panel LEDs

Acoustic

For events signaling, one more resource exists to

complete the User Interface: a buzzer than can be

programmed by the host application as a local user alarm.

Accessories

A standard Type A connector cable comes with the

product.

A kit of accessories for an easy mounting to wall or desk is

supplied (screws, rubber-feets, wall-hooks, rawl plugs,

etc).

Figure 2. DLR-DK001-XX Wall Mount Accessories

N° Name Description

1 POWER Power ON - Green LED

2 TAG-ID Tag Detection - Red Blinking LED

3 TX/RX USB Communication Activity - Yellow Blinking LED

Disposal of the product

Do not dispose the product in municipal or

household waste. Please check your local

regulations for recycle & disposal of electronic

products.

Accessories

4DLR-DK001-xx

Technical Specifications

Item Description

Physical Characteristics

Reader Dimension

(WLH) 29.7 x 20.5 x 1.5 cm

/ 11.7 x 8.1 x

0.6 in

Length of USB

1.5 m / 4.9 ft

Weight

525 g / 18.42 oz

Electrical Characteristics

Electrical Power

max 400 mA - 5 V dc bus powered (USB)

Reader - Tag Link

Type

UHF - RFID

Standard

ISO 18000-63/EPC C1G2

Frequency Bands

865.60

867.60 MHz European standard

902.00

928.00 MHz US standard

RF Power

Programmable in 18 levels from 5dBm

e.r.p. (3mW e.r.p.) to 22dBm e.r.p.

(150mW e.r.p.)

Antenna

Integrated circular polarized (horizontal)

Number of Channels

4 channels compliant to European

Standard

50 hopping channels compliant to US

standard

Reading Range

Up to 90cm

Reader - Host Link

USB type

USB 2.0 Full Speed (12 Mbit/s) Type A

dev. port

Virtual COM Port

Baudrate: 115.200 kbps

Databits: 8; Stopbits: 1;

Parity: none; Flow control: none

User Environment

Partic. & Water

IP40

Operating

0°C to 50°C / 32°F to 122°F

Storage

-20°C to 60°C / -4°F to 140°F

ESD

Air ± 16kV

Contact ± 8kV

Reader-Tag Link Profiles

Product Reference Guide 5

Reader-Tag Link Profiles

The DLR-DK001-XX readers support different

modulations and RF return link profiles according to EPC

Class1 Gen2 protocols.

Main profiles have been tested for the compliance with

ETSI and FCC regulations.

Table 2- DLR-DK001-XX Reader to tag link profiles

Link

Profile Regulation Modulation Return Link

0 ETSI - FCC DSB-ASK; f=40KHz FM0; f=40KHz

1 ETSI - FCC DSB-ASK; f=40KHz Miller (M=4); f=256 KHz

Radiation Patterns

6DLR-DK001-xx

Radiation Patterns

Both the DLR_DK001-XX products, due to their internally

placed antenna, have a non-ideal radiation pattern. Here

below are reported their radiation patterns.

Figure 3. DLR-DK001 Radiation pattern H plane

Figure 4. DLR-DK001 Radiation pattern V plane

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Datalogic Kartenleser Handbücher

Datalogic

Datalogic Touch 65 pro Bedienungsanleitung

Datalogic

Datalogic XRF410N Series Montage- und Bedienungsanleitung

Datalogic

Datalogic Gryphon GD4100 Bedienungsanleitung

Datalogic

Datalogic MATRIX-20 series Bedienungsanleitung

Datalogic

Datalogic OM-GRYPHON SERIES Bedienungsanleitung

Datalogic

Datalogic Matrix 400 Bedienungsanleitung

Datalogic

Datalogic DLC6100 Series Bedienungsanleitung

Datalogic

Datalogic Matrix 210N Bedienungsanleitung

Datalogic

Datalogic Gryphon D110 Bedienungsanleitung

Datalogic

Datalogic Matrix 120 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch