SUPPORT THROUGH THE WEBSITE
Datasensing provides several services as well as technical support through its
website.
Log on to www.datasensing.com.
For quick access, from the home page click on the search icon , and type in the
name of the product you’re looking for. This allows you access to download Data
Sheets, Manuals, Software & Utilities, and Drawings.
PATENT
See www.patents.datalogic.com for patent list.
This product is covered by one or more of the following patents:
Utility patents: EP2517148B1, EP2649555B1, EP2946338B1,US10095951,
US10552699, US10762405, US8888003, US8915443, US9396404,
US9495607, US9798948, ZL200980163411.X, ZL201080071124.9
SEALS
The Industrial Vision Processor has seals in some areas. The seals must not
be broken or removed for any reason. The sealed parts may be opened only
and exclusively by Datasensing. Breakage of these seals by a customer shall
result in immediate cancellation of the warranty on the entire Industrial Vision
Processor.
ELECTRICAL FEATURES
Supply voltage (Vs) 9 ~ 36VDC
Current Consumption Nominal: 5.5 A at 24VDC
Maximum: 23A at 9VDC; 6A at 36VDC
Digital Inputs 16 opto-isolated, see Digital I/O Specifications.
Input Voltage Logic 0: 3V max
Logic 1: 10V min (30V max) or dry contact.
Input Resistance 3.21kΩ
On Current >3mA
OffCurrent <1mA
Current Maximum 8.5 mA @30VDC
Isolation Protection 2500VDC
Optical isolation response
time 100μsec
Overvoltage protection 70VDC
Load Voltage 5 ~ 40VDC
Load Current 350mA (max per channel)
Input current 3.28mA @ 12VDC
6.71mA @24VDC
Digital Outputs 16 opto-isolated (configurable sink-NPN or
source-PNP), see Digital I/O Specifications.
Format Opto-coupler isolated open emitter output
Residual Voltage Output On 2V or less (output current ≤mA)
Optical isolation response
time 100μsec
Camera interface GigE (up to 8 depending on model)
USB Hardware Port USB 2.0 Port for USB Hardware Key
USB Ports 8x USB 3.0 ports for monitor, mouse and
keyboard
Graphic Interface Intel® HD (1920x1200 resolution) VGA, DVI
Host Communications:
Serial Communications 2x RS-232 Serial Port (COM 1 + COM 2)
Ethernet
10/100/1000 Mbps Ethernet x 2
Ethernet/RIP, Modbus, TCP, OPC, PROFINET
communications supported.
PHYSICAL FEATURES
Dimensions 7.55 w x 5.74 h x 9.05 d (in)
192 w x 145 h x 230 d (mm)
Weight 4450 g
Housing material Metal
ENVIRONMENTAL FEATURES
Temperature Operating: 0° to +50° C (+32° to +122° F)
Storage: -20° to +70° C (-4° to +158° F)
Relative Humidity 5 to 95%, non condensing
Vibrations
(EN60068-2-64) Random: 5 to 500Hz 3g
Vibrations
(EN60068-2-6)
Sine: Ramp to 2g from 5 to 15Hz
15 to 500Hz 2g
Shock resistance
(EN60068-2-27) Half sine: 11ms (50g Max)
Mechanical protection
(EN 60529) IP20
SOFTWARE FEATURES
Minimum Impact Software
Version Required 12.2.0
HARDWARE FEATURES
CPU Intel® Core i7
System Memory DDR4 RAM 32GB.
Storage 128 GB SSD, 1 CFast slot.
TECHNICAL DATA
821005994 Rev. E May 2022
CHINA ROHS TABLE OF RESTRICTED ELEMENTS
EXTRA DIGITAL OUTPUT GROUNDING
The spring clamp connector on the I/O Card provides two extra connections that
are equivalent to the GND/PCOM pin on the 37-pin connector and are used to
increase the current tolerance on the I/O Card. The spring clamp pins should
be connected whenever the combined total output current is higher than 3.2A.
The pin assignments are as follows:
Pin 1: PCOM, used in source type (PNP) connections
Pin 2: GND, used in sink type (NPN) connections
Spring Clamp Connector Pin Definition
Cable Part Number
Digital I/O 37-pin to Terminal Block 248-0110 606-0675-xx
Digital I/O 37-pin to pigtail (remove one end) 606-0675-xx
Note: Do not disconnect the cable at the connector while power is on.
WARRANTY
The warranty period for this product is 24 months. See General Terms and
Conditions of Sales at www.datasensing.com for further details.
CE COMPLIANCE
EUROPEAN DECLARATION OF CONFORMITY
Hereby, Datasensing S.r.l. declares that the full text of the European Declaration
of Conformity is available at: www.datasensing.com. Select the link from the
downloads section of the product page.
UKCA DECLARATION OF CONFORMITY
Hereby, Datasensing S.r.l. declares that the full text of the UKCA Declaration
of Conformity is available at: www.datasensing.com. Select the link from the
downloads section of the product page.
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written
approval of Datasensing could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
EAC COMPLIANCE
Customs Union:
The CU Conformity certification has been achieved; this allows the Product to
bear the Eurasian mark of conformity.
LEGAL NOTICES
©2021-2022 DATASENSING S.R.L.
• All rights reserved • Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means, or for any purpose, without
the express written permission of Datasensing S.r.l.
DISCLAIMER
Datasensing has taken reasonable measures to provide information in this
manual that is complete and accurate, however, Datasensing shall not be liable
for technical or editorial errors or omissions contained herein, nor for incidental
or consequential damages resulting from the use of this material. Datasensing
reserves the right to change any specification at any time without prior notice.
TRADEMARKS
Datasensing and the Datasensing logo are trademarks of Datasensing S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S. and the E.U. Impact is a trademark of
Datasensing S.r.l. and/or its affiliates, registered in many countries, including the
U.S. and the E.U. MX-E Series, Vision Program Manager (VPM) are trademarks
of Datasensing S.r.l. and/or its affiliates. All other trademarks and brands are
property of their respective owners.
භ௴撔
Hexavalent
Chromium (Cr(VI)
ከ㹜俼劗
Polybrominated biphenyls
(PBB)
ከ㹜Ḵ劗慂
Polybrominated diphenyl
ethers (PBDE)
ᵜ㺘Ṭᦞ 6-7 Ⲵ㿴ᇊ㕆ࡦDŽ
ƻ 㺘⽪䈕ᴹᇣ⢙䍘൘䈕䜘Ԧᡰᴹ൷䍘ᶀᯉѝⲴ䟿൷൘ *%7 㿴ᇊⲴ䲀䟿㾱≲ԕлDŽ
h 㺘⽪䈕ᴹᇣ⢙䍘㠣ቁ൘䈕䜘ԦⲴḀа൷䍘ᶀᯉѝⲴ䟿䎵ࠪ *%7 㿴ᇊⲴ䲀䟿㾱≲DŽ
I/O CONFIGURATION
Camera communication uses Cat6 Ethernet cable and provides POE for M1xx
and E1xx cameras. Use only Datasensing provided cables.
COMMUNICATIONS
Vision Program Manager (VPM) software installed on the processor is used to
create vision programs and configure input and output response. Refer to the
Impact Reference Guide for programming details.
DIGITAL I/O CABLES TERMINALS AND CONNECTIONS
Datasensing S.r.l.
Strada S. Caterina 235
41122 Modena
Italy
Tel. +39 059 420411
Fax +39 059 253973
