Datamax ANDES 3 Bedienungsanleitung

ANDES 3

User Guide

7A300028 Rev. A

Contents

General Precautions......................................................................................................1

Safety ...........................................................................................................................1

1 Getting Started .......................................................................................................2

1.1 Unpacking the Printer......................................................................................2

1.2 Installing and Charging the Battery Cartridge .....................................................3

1.2.1 Installing the Battery .............................................................................3

1.2.2 Charging the Battery..............................................................................4

1.3 Reading the LED Status...................................................................................5

1.4 Attaching Belt Loop System .............................................................................6

2 Loading Supplies.....................................................................................................7

2.1 Adding Paper or Labels....................................................................................7

2.2 Tearing Paper ................................................................................................8

3 Using the Printer.....................................................................................................9

3.1 Initial Power-Up and Self-Test..........................................................................9

3.2 Connecting the Printer................................................................................... 10

3.2.1 Dip Switches Location .......................................................................... 10

3.2.2 Setting Dip Switches............................................................................ 11

3.2.3 Dip Switch Functions............................................................................ 11

3.3 Communications........................................................................................... 12

3.3.1 Serial Communications Specification....................................................... 12

3.4 Infrared Communications Mode (IrDA) ............................................................ 13

3.5 Bluetooth/802.11b Communications (Option) ................................................... 13

3.6 Magnetic Stripe Reader (Option)..................................................................... 13

3.7 Programming Information.............................................................................. 14

3.7.1 ASCII Control Characters...................................................................... 15

3.7.2 Printer Font Commands........................................................................ 15

3.7.3 Printer Font Commands – Character Set ................................................. 15

3.7.4 Printer Graphic Commands ................................................................... 16

3.7.5 Magnetic Card Reader Control Commands (When MCR is installed)............. 16

3.7.6 Smart Card Reader Control Commands (when SCR is installed).................. 17

3.7.7 Graphic Logo and Bar Code Commands................................................... 17

3.7.8 Printer Supervisory and Control Commands............................................. 17

4 Printer Maintenance..............................................................................................19

4.1 Print Head Cleaning Instructions..................................................................... 19

4.2 Charging the Printer Battery .......................................................................... 19

4.2.1 Important Notes on Charging Batteries................................................... 20

4.2.2 Important Notes on Replacing Batteries.................................................. 20

4.3 Verifying Battery Charge State ....................................................................... 20

4.4 Battery and Safety Information ...................................................................... 21

4.5 Recycling Batteries ....................................................................................... 21

4.6 Troubleshooting ........................................................................................... 22

4.7 Printer Supplies............................................................................................ 23

5 Specifications........................................................................................................25

5.1 Printer Specifications .................................................................................... 25

5.2 Supply Specifications .................................................................................... 25

5.3 Regulatory Notes.......................................................................................... 26

5.3.1 FCC Part 15 Class B ............................................................................. 26

5.3.2 Warranty............................................................................................ 26

5.3.3 Warranty and/or Repair Service............................................................. 26

6 Customer Support .................................................................................................27

General Precautions

Before using this product be sure to read through this manual. After reading please

keep the manual in a safe place for future reference.

The information contained herein is subject to change without notice of any type.

Datamax-O’Neil is not responsible for any operational results regardless of missing

information, errors or any misprinting in this manual.

Datamax-O’Neil is not responsible for problems created as a result of using options

and consumables not approved by them.

This product is designed for servicing at an Authorized Service Center. Other than

routine maintenance described in this manual the user should not attempt to repair,

service or disassemble this product.

Incorrect operation, handling or improper operating environments may cause damage

or otherwise affect the proper operation of this product. Such actions invalidate the

product warranty.

Safety

In this manual and on the Printer and accessories we make use of internationally recognized

safety symbols as follows:

Caution! Refer to the explanation in this Manual

Caution! Risk of electric shock

Double Insulation or Reinforced Insulation

DC, Direct Current or Voltage

AC + DC, Current or Voltage

1 Getting Started

1.1 Unpacking the Printer

The ANDES 3 portable printer is a full featured portable receipt printer designed for varied

job environments including field service, field sales, hospitality and restaurants, ticketing and

many others where point of service receipts are required. The package contains:

Printer

Battery Cartridge

Universal Adapter (USA,UK, European and Australian plugs) for charging the battery

inside the printer

Belt Loop System and

Roll of paper supply (already loaded in the printer).

Both cabled and wireless communication is possible.

Overview

FIGURE 1: PRINTER OVERVIEW

1.2 Installing and Charging the Battery Cartridge

Note: One battery cartridge is included with the printer. Similar to a cordless phone battery,

the printer’s battery must be charged before using it.

Datamax-O’Neil batteries must be cycled several times to achieve maximum

capacity. To cycle a battery fully, charge it and then allow full discharge through

normal use in the printer.

1.2.1 Installing the Battery

Note: Refer to Figure 2 below to install the battery pack in the printer.

Unlock the battery door by sliding the battery door locking tab down

Open the battery door

Insert the battery as shown. The battery side with two contact terminals should be facing

down to make contact with the two spring probes inside the battery compartment.

Close the battery door.

Lock the battery door by sliding the battery door locking tab up

FIGURE 2: INSTALLING THE BATTERY CARTRIDGE

Note: Ensure the battery is properly seated before closing door. To ensure a full charge do

not operate the printer while charging.

1.2.2 Charging the Battery

Plug battery charger adapter output cable into the battery charger connector as shown

in Figure 3.

FIGURE 3 – BATTERY CHARGER

Plug battery charger adapter into the appropriate AC line voltage socket.

The Yellow/Amber charging LED will illuminate indicating that the battery is being

charged

The battery will be fast charged and after about 180 minutes. The LED will turn off

To remove the battery cartridge, open the battery door and tip the battery out of the

printer.

Note: To ensure a full charge do not operate the printer while charging.

Note: The wall mounted charger is a Class II equipment (

)

. Multiple plug configurations

comply with most international standards. The wall-mounted charger is not supplied with

plugs for use in Korea.

Model ANDES 3

Input Voltage/Current 100-240 VAC/0.4A

Input Frequency 47-63 Hz

Output Voltage/Current ( ) 10VDC/1.32A

Do not use a charger not approved by Datamax-O’Neil for use with the ANDES 3.

Use of an unapproved charger could damage the battery pack or the printer and will

void the warranty.

The battery terminals are well recessed inside the printer. Do not allow them to

contact conductive material since this may create a short circuit, which could

cause injury or start a fire.

When using the wall mounted charger, ensure the socket outlet is close to the

printer and easily accessible during the process. Switch the socket off, pull the

charger from the socket, or disconnect the plug from the printer in case of

problems.

1.3 Reading the LED Status

The illustration below points out the location of the LED indicators described in Table 1.

FIGURE 4 – LED INDICATOR LOCATIONS

Note: Refer to the Troubleshooting guide to determine error or fault condition.

Table 1 explains the LED indicator status. Refer to Figure 4 for the locations described for

ON/OFF and FEED pushbutton switches and AC adapter socket

Table 1 - Reading the LED Status

1.4 Attaching Belt Loop System

The belt loop system consists of two parts as seen in Figure 5:

A knob located on the back part of the printer just above the battery door

A strap with click on connector

To attach the strap to the knob insert the knob located at the bottom of the printer into the

slot of the connector. Pull down until you hear a click. The printer is now secure. The loop is

then placed over your belt. Allow the printer to hang down to either the left or right hip.

To release the printer, press in on the two latches on the connector and pull the knob

clear of the slot.

Note: Do not force or pull the printer from the connector without pressing in on the two

latches

KNOB CONNECTION

FIGURE 5– KNOB CONNECTION AND QUICK CLIP

Inhaltsverzeichnis

Andere Datamax Drucker Handbücher

Datamax

Datamax Apex 2 Bedienungsanleitung

Datamax

Datamax ST-3210 Bedienungsanleitung

Datamax

Datamax MP Compact4 Mark II Bedienungsanleitung

Datamax

Datamax MP-Compact4 Handbuch

Datamax

Datamax Apex 3 Bedienungsanleitung

Datamax

Datamax MP Compact4 Mark II Bedienungsanleitung

Datamax

Datamax E-Class Mark III Professional+ Bedienungsanleitung

Datamax

Datamax OC-3 Series Bedienungsanleitung

Datamax

Datamax 88-2312-01 Bedienungsanleitung

Datamax

Datamax RL4 Bedienungsanleitung

Datamax

Datamax M-Class Mark II Series Bedienungsanleitung

Datamax

Datamax Mark II M-4210 Bedienungsanleitung

Datamax

Datamax OC2 BT Leitfaden

Datamax

Datamax E-Class Mark III MPU-4000 Bedienungsanleitung

Datamax

Datamax PRINTPAD MC70 Bedienungsanleitung

Datamax

Datamax A-Class Mark II Bedienungsanleitung

Datamax

Datamax H-Class H-6 Series Bedienungsanleitung

Datamax

Datamax M-Class Mark II Bedienungsanleitung

Datamax

Datamax H-4212X Bedienungsanleitung

Datamax

Datamax Apex 2 Bedienungsanleitung

Datamax

Datamax I-4201 Bedienungsanleitung

Datamax

Datamax OC-2 series Bedienungsanleitung

Datamax

Datamax Workstation w1110 Bedienungsanleitung

Datamax

Datamax Apex 3 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung