DataMetrics 2000 Series Bedienungsanleitung
This manual is intended to function as an example ONLY and does not represent all configurations and options for this product.
Model 2000 Series
Ruggedized Dot Matrix Printer
Operation and Maintenance Manual
Model 2000 Printer
DataMetrics Corporation
1717 Diplomacy Row
Orlando, FL 32809
PHONE: 407.251.4577
FAX: 407.251.4588
Data Rights Provisions
THE INFORMATION CONTAINED IN THIS MANUAL IS SUPPLIED WITH LIMITED RIGHTS ONLY. DATA
SHALL NOT, WITHOUT THE WRITTEN PERMISSION OF THE CONTRACTOR, BE EITHER (A) USED,
RELEASED, OR DISCLOSED IN WHOLE OR IN PART OUTSIDE THE GOVERNMENT, (B) USED IN
WHOLE OR IN PART BY THE GOVERNMENT FOR MANUFACTURE OR, IN THE CASE OF COMPUTER
SOFTWARE DOCUMENTATION, FOR PREPARING THE SAME OR SIMILAR COMPUTER SOFTWARE,
OR (C) USED BY A PARTY OTHER THAN THE GOVERNMENT, EXCEPT FOR: (1) EMERGENCY
REPAIR OR OVERHAUL WORK ONLY, BY OR FOR THE GOVERNMENT, WHERE THE ITEM OR
PROCESS CONCERNED IS NOT OTHERWISE REASONABLY AVAILABLE TO ENABLE TIMELY
PERFORMANCE OF THE WORK, PROVIDED THAT THE RELEASE OR DISCLOSURE HEREOF
OUTSIDE THE GOVERNMENT SHALL BE MADE SUBJECT TO A PROHIBITION AGAINST FURTHER
USE, RELEASE OR DISCLOSURE; OR (2) RELEASE TO A FOREIGN GOVERNMENT, AS THE
INTEREST OF THE UNITED STATES MAY REQUIRE, ONLY FOR INFORMATION OR EVALUATION
WITHIN SUCH GOVERNMENT OR THE CONDITIONS OF (1) ABOVE. THIS STATEMENT SHALL BE
INCLUDED ON ANY REPRODUCTION HEREOF.
MODEL 2000 PRINTER OPERATION AND MAINTENANCE
DataMetrics Corporation i
Contents
1. CONFIGURATION ............................................................................................................1
1.1. Introduction......................................................................................................................1
2. GENERAL INFORMATION...............................................................................................5
2.1. Introduction......................................................................................................................5
2.2. Applicable Documents.....................................................................................................5
2.3. Printer Description...........................................................................................................5
2.3.1. Power Subsystem.........................................................................................................5
2.3.2. Printing Subsystem.......................................................................................................5
2.3.3. Control Panel................................................................................................................6
2.3.4. External Interfaces.......................................................................................................6
2.4. Specifications..................................................................................................................6
2.5. Options..........................................................................................................................10
2.5.1. Memory Buffer............................................................................................................10
2.5.2. RS-232 Interface ........................................................................................................10
2.5.3. Ethernet Interface.......................................................................................................10
2.5.4. 28 Vdc Input Power....................................................................................................10
3. INSTALLATION...............................................................................................................11
3.1. Introduction....................................................................................................................11
3.2. Chassis Installation Configuration .................................................................................11
3.3. Unpacking .....................................................................................................................11
3.4. Ribbon Installation.........................................................................................................11
3.5. Paper Installation...........................................................................................................11
3.5.1. External Paper Feed...................................................................................................17
3.5.2. Internal Paper Feed....................................................................................................17
3.6. External Cable Installation.............................................................................................18
3.7. Software Installation......................................................................................................19
3.8. Setup Utility...................................................................................................................19
3.9. Limited Operation, Storage, and Transportation............................................................22
4. OPERATION...................................................................................................................23
4.1. Introduction....................................................................................................................23
4.2. Controls and Indicators..................................................................................................23
4.3. Self Test........................................................................................................................25
4.4. Normal Operation..........................................................................................................25
4.4.1. Stopping a Print Job...................................................................................................25
4.5. Error Conditions ............................................................................................................25
4.6. Shutdown ......................................................................................................................25
5. FUNCTIONAL DESCRIPTION........................................................................................27
5.1. Introduction....................................................................................................................27
5.1.1. Power Distribution ......................................................................................................27
5.1.2. Printing Subsystem.....................................................................................................27
5.1.3. Control Panel..............................................................................................................27
5.1.4. Heaters.......................................................................................................................27
MODEL 2000 PRINTER OPERATION AND MAINTENANCE
DataMetrics Corporation ii
6. MAINTENANCE ..............................................................................................................29
6.1. Introduction....................................................................................................................29
6.2. Tools and Test Equipment.............................................................................................29
6.3. Periodic Maintenance....................................................................................................29
6.3.1. Cleaning and Lubrication............................................................................................29
6.3.2. Ribbon Cassette Re-Inking.........................................................................................29
6.4. Fault Isolation................................................................................................................29
6.5. Replaceable Components and Subassemblies.............................................................29
6.5.1. Ribbon Cassette.........................................................................................................34
6.5.2. Print Engine................................................................................................................34
6.5.3. Power Supply .............................................................................................................35
6.5.4. Circuit Breaker Assembly...........................................................................................35
6.5.5. Line Filter....................................................................................................................36
6.5.6. Controller Board .........................................................................................................36
6.5.7. Control Panel Interface...............................................................................................37
6.5.8. Control Panel..............................................................................................................37
MODEL 2000 PRINTER OPERATION AND MAINTENANCE
DataMetrics Corporation iii
Figures
Figure 2-1. Tabletop/External Paper Feed Configuration......................................................6
Figure 2-2. Rack Mount/Internal Paper Feed Configuration..................................................7
Figure 3-1. Rack Mount/Internal Paper Feed Configuration Installation Dimensions ..........12
Figure 3-2. Tabletop/External Paper Feed Configuration Installation Dimensions ..............13
Figure 3-3. Tabletop Configuration Mounting Footprint.......................................................14
Figure 3-4. External Feed Configuration Ribbon and Paper Installation..............................15
Figure 3-5. Internal Feed Configuration Ribbon and Paper Installation...............................16
Figure 3-6. Rear Panel........................................................................................................18
Figure 4-1. Front Panel........................................................................................................23
Figure 5-1. Chassis Interconnections..................................................................................28
Figure 6-1. Periodic Maintenance Locations .......................................................................30
Figure 6-2. External Feed Configuration Replaceable Unit Locations.................................32
Figure 6-3. Internal Feed Configuration Replaceable Unit Locations ..................................33
Tables
Table 1-1. System Configuration...........................................................................................2
Table 1-2. Field Replaceable Units........................................................................................2
Table 1-3. External Cables....................................................................................................2
Table 1-4. External Connector Signal Assignments ..............................................................3
Table 2-1. Physical Specifications.........................................................................................7
Table 2-2. Electrical Specifications........................................................................................8
Table 2-3. Environmental Specifications ...............................................................................8
Table 2-4. Printer Performance Specifications......................................................................9
Table 3-1. Setup Utility Menus ............................................................................................20
Table 3-2. Setup Utility Function Keys.................................................................................22
Table 4-1. Controls and Indicators ......................................................................................24
Table 6-1. Fault Isolation.....................................................................................................31
MODEL 2000 PRINTER OPERATION AND MAINTENANCE
DataMetrics Corporation 1
1. CONFIGURATION
1.1. Introduction
This chapter defines the configuration of a specific Model 2x00 printer. Information is
provided concerning system configuration (Table 1-1), field-replaceable units (Table 1-2),
external cabling (Table 1-3), and external connector signal assignments (Table 1-4).
MODEL 2000 PRINTER OPERATION AND MAINTENANCE
DataMetrics Corporation 2
Table 1-1. System Configuration
Characteristic Description
Top Assembly Part No. 202000-001
Paper-Feed Configuration External Feed
Installation Configuration Tabletop
Table 1-2. Field Replaceable Units
Description Part No.
Print Engine Assembly 200014-001
Control Panel Interface 200094-001
Power Supply Assembly 200179-002
Circuit Breaker Assembly 200220-002
Ribbon Cassette 302000-095 (1)
Controller Board 302000-098
Line Filter 600011-001
Control Panel 700002-001
(1) Equivalent to Panasonic order number KX-P160.
Table 1-3. External Cables
Description Part No.
AC Power Cable 200199-003
Inhaltsverzeichnis
Andere DataMetrics Drucker Handbücher
