Datexel Simply Modbus Benutzerhandbuch
Using Simply Modbus to read Temperature with
Modbus Slave ermocouple module.
DATEXEL LLC
www.datexel.com
Call 561 779 5660 for Technical Support. 1 of 2
Set up Simply Modbus.
1. Download demo or purchase the RTU Simply
Modbus Master from www.simplymodbus.ca.
2. Install and run the Soware.
1. Connect 24 Vdc to Terminal I and J.
2. Connect RS485 from the PC to A (D-) and B
(D+)
3. Connect a thermocouple or temperature Cali-
brator to Channel 0.
4. If you do not know the ermocouple Modbus
Slave connect the short on INIT and recycle
the power. is will set all the communication
parameters to the following.
• Baud Rate 9600.
• Data bits 8.
• Stop Bits 1.
• Parity None.
Set up DAT3016.
Setting the Communication Port
on the Simply Modbus Soware.
1. e mode of Communication is RTU.
2. e Com port of the PC is 3. is could be
dierent.
3. e Baud rate is 9600.
4. e Data bits is 8.
5. e Stop bits is 1.
6. e Parity is none.
2 of 2
Setting the Slave ID and Read
Registers.
1. e Slave ID on the DAT3016 is 1.
2. e Register of Channel 0 is 40015.
3. As the DAT3016 is a 4 channel thermocouple
Modbus Slave we would like to read all 4 chan-
nels, so we type 4 in No. of Regs.
4. e oset is 40001.
More information on the register tables are in the
User Guide.
Sending the Command and
Receiving the Temperature.
1. Click Send.
2. If all is good the DAT3016 should return the
Temperature.
3. e result is a temperature of 254 which equals
25.4’C.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Datexel Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
