Davey Frill-NeckWizard Bedienungsanleitung
Please pass these instructions on to the operator of this equipment.
Automatic Pool Cleaner
Installation and
Operating Instructions
E-mail: sales@davey.com.au
Website: davey.com.au
Rainbow Pool Products
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: [email protected]
Web: www.rainbowpoolproducts.com.au
2
Congratulations on the purchase of your Davey Frill-NeckWIZARD®
automatic pool cleaner. Your new Frill-NeckWIZARD®has been designed
for hassle-free surface maintenance of all popular above and below ground
pools, so you can simply relax and enjoy swimming in a clean pool!
INDEX:
Packing List .................................................................................................. 3
Flow Rate Requirement................................................................................ 3
Your Frill-NeckWIZARD®Pool Cleaner......................................................... 3
Step1: Pre-Installation of your Frill-NeckWIZARD®...................................... 5
Step 2: Preparing your pool for the Frill-NeckWIZARD®............................... 5
Step 3: Assembling the Cleaning Head........................................................ 6
Step 4: Setting Up the Hoses ....................................................................... 6
Step 5: Setting Up the Skimmer Box Connection......................................... 7
Step 6: Checking the Flow............................................................................ 7
Step 7: Connecting the Frill-NeckWIZARD®................................................. 8
Step 8: Fine Tuning ...................................................................................... 8
Caring for your Frill-NeckWIZARD®............................................................ 10
Maintenance & Service Tips ....................................................................... 10
Trouble Shooting ........................................................................................ 13
Accessories ................................................................................................ 14
Spare parts ................................................................................................. 15
Davey Water Products Guarantee.............................................................. 16
Automatic Pool Cleaner
IMPORTANT NOTE: PLEASE READ THESE INSTALLATION
& OPERATING INSTRUCTIONS. To get the best performance
from your Frill-NeckWIZARD®it is essential that you set up the
pool cleaner properly.
3
PACKING LIST:
Included with your Frill-NeckWIZARD®are the following parts:
1. Frill-NeckWIZARD®Head Unit
2. 12 x Hose Sections
3. Surface Cleaning Frill
'HÀHFWRU5LQJ
5. Bumper
6. Hose Weight Ring
7. Hose protector Ring
8. Alternative ‘Slippery Surface’ Footpad
9. Automatic Weir Valve
10. 2 x 45º Angle Joints
11. Universal Weir Adaptor
12. Flow Meter
Flow Rate Requirement
For optimum cleaning performance, your Frill-NeckWIZARD®automatic pool
FOHDQHUUHTXLUHVOLWUHVSHUPLQXWHOSPRIÀRZIURPWKHSRROSXPS
Your Frill-NeckWIZARD®Pool Cleaner
1. Frill-NeckWIZARD®Cleaner Head and Engine Unit:
The Frill-NeckWIZARD®utilises a unique piston-action engine in the
cleaner head that propels the pool cleaner in a strong and constant
forward motion. Suction from your pool pump draws up dirt and small
GHEULVRIIWKHSRROÀRRUWKURXJKWKHWKURDWRIWKHKHDGXQLWDQGWKHQYLD
WKHKRVHWRWKH¿OWHU
Automatic Pool Cleaner
Engine Unit
Cleaner Head
4
2. Surface Cleaning Frill and Footpad: Captures debris from the pool
ÀRRULQWKHYDFXXP¿HOGZKLOVWVFUXEELQJWKHSRROÀRRUFOHDQ
'HÀHFWRU5LQJ Assists the Frill-NeckWIZARD®in negotiating steps,
tight corners and ladders. Can be set at different heights on the bumper.
4. Bumper: Protects the extension pipe from damage whilst providing
SURYLVLRQIRUWKHDWWDFKPHQWRIWKHGHÀHFWRUZKHHO
5. Flow Meter:$OORZV\RXWRGHWHUPLQHWKHEDVLFÀRZRI\RXUSXPS
6. Automatic Weir Valve:$OORZV\RXWRUHJXODWHWKHÀRZUDWHWKURXJKWKH
cleaner for best performance in your pool.
Cleaning Frill Foot Pad
'HÀHFWRU5LQJ
Flow Meter
Automatic
Weir Valve
Bumper
5
Step 1: Pre-installation of your
Frill-NeckWIZARD®Pool Cleaner
Before you begin to install the Frill-NeckWIZARD®it is important you have
DEDVLFXQGHUVWDQGLQJRIKRZWKHSRROZDWHUÀRZVIURPWKHVNLPPHU
WKURXJKWKHSRROSXPSDQG¿OWHUUHWXUQLQJWRWKHSRRO%HORZLVDGLDJUDP
of a typical pool with standard equipment showing how the water usually
ÀRZV,I\RXDUHVWLOOXQVXUHVLPSO\UHIHUWR\RXUORFDOSRROSURIHVVLRQDOIRU
assistance.
Step 2: Preparing your Pool for the
Frill-NeckWIZARD®
$&OHDQWKH¿OWHUDQGHPSW\WKHVNLPPHUEDVNHWV
B. Completely close off main drain and / or second skimmer box
C. Ensure the pool water is chemically balanced
D. Adjust water returns jets sideways to minimise turbulence which can
LQÀXHQFHWKHKRVHDQGWKHIUHHPRYHPHQWRIWKH)ULOO1HFN:,=$5'®
NOTE: Some skimmer boxes require the use of an expanding or threaded
plug to effectively close off the main drain line. If you are unsure,
simply ask to your local pool professional.
6
Step 3: Assembling the Cleaning Head
A. Fit the Cleaning Frill over the base and footpad of your
Frill-NeckWIZARD®. Ensure that the word “TOP” is facing upwards.
%0DNHVXUHWKDWWKH)ULOOURWDWHVIUHHO\RQFH¿WWHG
Step 4: Setting Up the Hoses
A. Firmly connect the hose sections together with enough lengths to reach
from the skimmer box to the furthest point in the pool, plus additional
OHQJWKV)RUDVHFXUH¿WWKHIHPDOHVRFNHWPXVWFRYHUWKHWKULQJ
(corrugation) of the male end.
If the furthest point from the skimmer box is the steps, use the lowest
step as the furthest point.
NOTE: If you require extra lengths, please contact your Frill-NeckWIZARD®
dealer and refer to spare parts code on page 15.
%6OLGHWKHKRVHZHLJKWULQJRYHUWKH¿UVWKRVHWKDWZLOOFRQQHFWRQWRWKH
cleaner head) and position it approximately 30cm up from the male end.
Female cuff Male cuff
Female
Cuff
Cleaner
Head
30 cm
7
C. Place the hose protector ring approximately 10cm from the female
end of the last hose (closest to the skimmer box). The position can be
adjusted later for best hose protection.
Step 5: Setting Up the Weir
(Skimmer Box Connection)
A. Ensure that the pump is switched OFF.
%3ODFHWKH8QLYHUVDO:HLU$GDSWRU¿UPO\LQWRWKHZHLUVNLPPHUSODWH
C. Connect 2 x 45 elbows to the weir adaptor and insert the weir valve
into it. Ensure the “Water Flow” arrow on the side of the valve is
SRLQWLQJWRZDUGVWKHVNLPPHUSODWHDQGWKHYDOYHE\SDVVÀDSLVSRLQWLQJ
downwards.
Step 6: Checking the Flow
8VHWKHÀRZPHWHUVXSSOLHGWRPHDVXUHWKHÀRZJRLQJWKURXJK\RXU
Frill-NeckWIZARD®before you attach the cleaning head.
$$WWDFKWKHÀRZPHWHUWRWKH¿UVWOHQJWKRIKRVHWKDWFRQQHFWVWRWKH
cleaning head).
%)HHGWKHFOHDQHUKRVHYHUWLFDOO\LQWRWKHSRROVRWKDWLW¿OOVZLWKZDWHU
Helpful Tip:3ODFHWKHHQGRIWKHKRVHRYHUDUHWXUQMHWWRTXLFNO\¿OOWKH
hose with water.
&&RQQHFWIHPDOHFXII¿WWHGZLWKKRVHSURWHFWRUWRWKHZHLUYDOYH
'6XEPHUJHWKHÀRZPHWHUDQGVZLWFK21WKHSRROSXPS
E. Read the location of the black disc. For optimum cleaning performance
WKHUHDGLQJRQWKHÀRZPHWHUVFDOHVKRXOGEH0(',80
),IÀRZLVWRRKLJKRUWRRORZUHIHUWR6WHS&RUUHFW6SHHGDQG
Performance.
NOTE:,IÀRZLVWRRORZLWZLOODIIHFWWKHSHUIRUPDQFHRI\RXUFOHDQHU
,IÀRZLVWRRKLJKSUHPDWXUHIDLOXUHRIWKHHQJLQHXQLWPD\RFFXU
Ideal Range
8
Step 7: Connecting the Frill-NeckWIZARD®
$)HHGWKHFOHDQHUKRVHYHUWLFDOO\LQWRWKHSRROVRWKDWLW¿OOVZLWKZDWHU
B. Submerge the Frill-NeckWIZARD®cleaner head under water and rotate
to allow any air to escape (bubbles will be released)
&3XVKWKHPDOHFXIIHQGRIWKHKRVH¿UPO\RQWRWKHRXWHUH[WHQVLRQSLSH
of the cleaner head of the Frill-NeckWIZARD®.
'&RQQHFWIHPDOHFXII¿WWHGZLWKKRVHSURWHFWRUWRWKHZHLUYDOYH
E. Lower the cleaner head gently and gradually into the pool
F. Switch the pump on and watch the WIZARD clean like magic!
Step 8: Fine Tuning
Correcting the Angle of the Cleaner Head
$7KHSRROFOHDQHUPXVWEHDQJOHGVRWKDWWKH&OHDQLQJ)ULOOLVÀXVKZLWK
the pool surface.
B. The hose weight is used to neutralise the buoyancy of the pool hoses.
C. Correcting the angle of the head must be done in the deepest area of
the pool.
D. Adjust the hose weight up or down to ensure that the Cleaning Frill sits
ÀXVKZLWKWKHSRROVXUIDFH
Correct Speed and Performance
A. The auto weir valve has 3 settings – high, medium or low.
B. The auto weir valve is preset at the factory to achieve maximum
cleaning ability on the medium setting.
&2QO\DGMXVWWKHDXWRZHLUYDOYHVHWWLQJLIGLVVDWLV¿HGZLWKSRROFOHDQHU
performance – see table on page 9.
9
PERFORMANCE CAUSE CORRECTION
The WIZARD is moving too fast
and / or is climbing above
water level
Too much suction
Adjust springs on
automatic weir
valve to Low setting
The WIZARD is moving too
slowly and / or not climbing
the low walls
Not enough suction
Adjust springs on
automatic weir
valve to High setting
Both springs are
connected to the button
on the free end of the
rotating arm (both
springs are at
minimum stretch)
The left spring is
connected to the free end
of the rotating arm and the
right spring is connected
WRWKH¿[HGEXWWRQRQH
spring is short and one
spring is long).
Both springs are
FRQQHFWHGWRWKH¿[HG
buttons of the rotating
arms (both springs are
at maximum stretch)
)LWWLQJWKH'HÀHFWRU5LQJ
$7KHGHÀHFWRUULQJHQDEOHVWKHSRROFOHDQHUWRPDQRHXYUHLWVHOIDZD\
from pool steps and severe pool wall angles.
%3RVLWLRQWKHGHÀHFWRUULQJE\FOLSSLQJLWLQWRRQHRIWKHWKUHHSRVLWLRQVRQ
the bumper below the lowest step of the pool.
LEFT
VIEW
LEFT
VIEW
LEFT
VIEW
LOW SETTING MEDIUM SETTING HIGH SETTING
RIGHT
VIEW
RIGHT
VIEW
RIGHT
VIEW
10
Improving Suction Performance
Your Frill-NeckWIZARD®has been supplied with an alternative footpad
(Dark Silver / without channels) that is designed to give better suction on
VOLSSHU\SRROVXUIDFHVVXFKDV¿EUHJODVVJHOFRDWYLQ\OOLQHUVDQGWLOHV
6LPSO\UHPRYHWKHVWDQGDUGIRRWSDGDQG¿WWKHDOWHUQDWLYHIRRWSDGIRU
better suction performance.
Correcting Pool Surface Coverage
All return jets should be adjusted sideways however it is sometimes
SRVVLEOHWRDGMXVWWKHÀRZIURP\RXUUHWXUQMHWVVRDVWRJXLGHWKH
Frill-NeckWIZARD®away from steps, ladders and corners.
Caring for your Frill-NeckWIZARD®
DO NOT EVER:
1. Remove the Frill-NeckWIZARD®from the pool while the pump
is running as this will introduce air to the pump and cause it to
lose Prime.
2. Put any oil, grease or other lubricants on the engine unit. Water is the
only lubricant required.
3. Leave the pool cleaner in the pool when
“shocking” it with aggressive chemical
treatments. This could lead to chemical
damage.
4. Store cleaner hose in a coiled position. It is
manufactured using special materials which
enables hose memory and may cause the
hose to lie awkwardly on the water preventing
the Frill-NeckWIZARD®from moving freely
around the pool.
Maintenance & Service Tips
Operating Time: It is good practice to operate your Frill-NeckWIZARD®for
the amount of time required to clean your pool only, to maximise the life of
the product.
Ladder (Above Ground Pools): To prevent Frill-NeckWIZARD®being
caught behind ladders in above ground pools, the ladder could be removed
when the Frill-NeckWIZARD®is operating, or an obstacle placed on pool
ÀRRURQERWKVLGHVRIWKHODGGHUIHHWWRSUHYHQW)ULOO1HFN:,=$5'®moving
behind the ladder.
Remove Frill-NeckWIZARD®pool cleaner when backwashing: To allow
RSWLPXPÀRZUDWHWKURXJK¿OWHUDQGWRDYRLGGHEULVFORJJLQJWKH¿OWHU
backwash system.
Andere Handbücher für Frill-NeckWizard
1
Inhaltsverzeichnis
Andere Davey Schwimmbadroboter Handbücher
