David Clark U3813 Montageanleitung
19510P-03 (03-92) ©1992 David Clark Company Incorporated
MODEL U3813
INSTALLATION/OPERATION INSTRUCTIONS
HEADSET STATION/REMOTE PTT
DESCRIPTION
The U3813 Headset Station/Remote PTT is designed to combine the transmit and receive
functions of a mobile radio with the David Clark Company Series 3800 Intercom System. The
Module has a headset jack, push-to-talk (PTT) button, radio input connector, two intercom
connectors and a remote PTT connector. A listen level control allows the user to adjust their
headset volume to suit individual preference without affecting the volume of other users within a
system.
An important feature of the U3813 is that while the PTT button is depressed, or while a remote
PTT switch is activated, radio transmission is limited to the user who's headset is connected to
this module.
INSTALLATION
1. Select a mounting location where the headset cord will not interfere with the user's job
function or otherwise force actions that may jeopardize safe operation when using the
module's PTT button.
2. Mount the U3813 by placing one grommet between each of the four mounting brackets and
the mounting surface. Grommets are provided with the module but fasteners are not. The
type of fastener selected should be based on mounting location and surface material.
CONNECTION
1. All cords have keyed connectors. Install cords as follows:
a. Align key-way slot on cord connector with key in corresponding connector on module.
b. Insert cord connector until firmly seated.
c. Hand tighten swivel nut on cord connector. Do not over tighten.
2. A C3821 Radio Interface Cord is used to connect the U3813 module to a mobile radio.
Connections for the C3821 are as follow:
Color Function
Red Microphone High
White Microphone Low
Green Speaker High
Black Speaker Low
Blue PTT Low and Shield
Yellow PTT High
Attach the stripped end of the C3821 to the radio using the connections as above. Connect
the end of the C3821 with the 6-pin connector to the 6-socket connector on the U3813,
labeled "Radio Input".
NOTE: If more than one radio interface module is used in a Series 3800
System connected to a common mobile radio the speaker audio
connections should be made to only one of the modules.
3. C38-** Jumper Cords, of appropriate length, are used to connect the U3813 Module to other
components within the system. Connect one end of the jumper cord to one of the connectors
on the U3813 labeled "System Input" and the other end of the jumper cord to a connector on
the U3800, or other module, labeled "System Input', or "Remote Output".
NOTE: All of the 4-socket connectors on any module within a system are
acceptable connection points for jumper cords.
4. Remote PTT switches may be used in conjunction with the U3813. These devices attach to
the U3813 using the 5-socket connector labeled "Remote PTT". A connector kit P/N
18352G-07, when necessary, is used to connect the PTT switch to the U3813. The heavy
duty Footswitch (P/N 40071G-04), with a 15 foot cord and connector, is specifically
designed for this purpose but any SPST switch may also be used.
Remote PTT Connector Diagram
5. Connect a Series 7000 Headset to the connector on the face of the U3813 by lifting the cover
on the U3813 and seating the headset connector firmly into the receptacle.
OPERATION
1. Adjust headset for a comfortable fit.
2. Position the boom-mounted microphone directly in front of your mouth, within 1/8" of your
lips.
NOTE: In order to properly cancel background noise and provide clear
communications, placement of the microphone must be within 1/8"
of your lips.
3. Adjust the listen level control on the U3813 to a comfortable level.
4. The receive audio from the radio will be heard in all headsets connected to the system.
5. To transmit over the radio, depress and hold the PTT switch on the U3813 or depress and
hold the remote PTT switch, if your system is so equipped.
NOTE: Radio speakers mounted near the headset may produce feedback,
causing a squeal when transmitting. If this occurs the speaker should
be relocated, or a speaker cutoff switch should be installed.
Inhaltsverzeichnis
Andere David Clark Headset Handbücher
David Clark
David Clark X11 Bedienungsanleitung
David Clark
David Clark H6600i Bedienungsanleitung
David Clark
David Clark ENC Bedienungsanleitung
David Clark
David Clark H9930 Betriebsanleitung
David Clark
David Clark HBT Series Betriebsanleitung
David Clark
David Clark dc onex Bedienungsanleitung
David Clark
David Clark DC PRO-X2 Series Bedienungsanleitung
David Clark
David Clark H9140-HT Bedienungsanleitung
David Clark
David Clark H3530 Betriebsanleitung
David Clark
David Clark H3313 Bedienungsanleitung
David Clark
David Clark H9130 Betriebsanleitung
David Clark
David Clark H9940 Betriebsanleitung
David Clark
David Clark H9140 Betriebsanleitung
David Clark
David Clark H3335 Betriebsanleitung
David Clark
David Clark HBT-30 Betriebsanleitung
David Clark
David Clark H3310 Bedienungsanleitung
David Clark
David Clark H9910 Betriebsanleitung
David Clark
David Clark U9910-BSW Bedienungsanleitung
David Clark
David Clark HBT-60 Betriebsanleitung
David Clark
David Clark H3312 Bedienungsanleitung
