DB Electronics DSW-100 Series Bedienungsanleitung

DSW-100

SHANGHAI DIGITAL BALANCE ELECTRONIC CO., LTD

version1.4 2020.12

INTRODUCTION

Thank you for purchasing the DSW-100 series simple weighing scale from SHANGHAI

DIGITAL BALANCE ELECTRONIC CO., LTD.

The DSW-100 series has many features and designed functions that are conducive to

operate and increase customer satisfaction. We believe that all your needs will be fully match.

You can discover many convenient functions and features through this manual.

DSW-100 has weighing and counting functions.

Backlit display with automatic energy saving mode. In addition, the brightness of

the backlight and the auto-off time are set by the user.

In addition to using the AC adapter, it can also be powered by a built-in universal

dry battery (alkaline dry battery with battery model R20P SIZE-D 1.5V), which is

very suitable for use in a mobile working environment.

Display backlight brightness level can be set from 0 to 9, level 0 turns off the

backlight, level 9 is the brightest.

SCALE FEATURE

Contents

Operational Warning.................................................................................... I

Precautions................................................................................................... II

1. Conventional............................................................................................ 1

1.1 Product Specifications................................................................................... 1

1.2 Indicator display ............................................................................................ 2

1.3 Basic function keys ....................................................................................... 2

1.4 Global view.................................................................................................... 3

1.5 Interface......................................................................................................... 4

1.6 Display........................................................................................................... 4

2. Basic operation........................................................................................ 5

2.1 Boot operation ............................................................................................... 5

2.2 Shutdown operation...................................................................................... 6

2.3 Zero operation ............................................................................................... 7

2.4 Tare operation ............................................................................................... 8

2.5 Counting and weighing operation.................................................................. 9

2.6 Weight unit switch.......................................................................................... 12

2.5 Backlight brightness setting........................................................................... 13

3. Edit settings............................................................................................. 14

3.1 Keyboard shortcuts ....................................................................................... 14

3.2 Customer function entry ................................................................................ 15

3.3 Customer function SPEC definition ............................................................... 16

3.4 System function entry.................................................................................... 18

3.5 System function definition.............................................................................. 19

4. Calibration operation ............................................................................... 23

4.1 Full scale calibration...................................................................................... 23

4.2 Full scale rate correction ............................................................................... 25

4.3 Internal code check/display ........................................................................... 27

5. Factory settings ....................................................................................... 28

5.1 Reset ............................................................................................................. 28

5.2 Factory default............................................................................................... 29

6. Prompt message ..................................................................................... 30

Prompt information list......................................................................................... 30

7. Serial and USB........................................................................................ 31

7.1 POS serial protocol used in China ................................................................ 31

7.2 Standard POS serial port protocol................................................................. 35

Please follow the instructions below to operate the

product to ensure product and personal safety.

Before installation,

it is important to

check whether

the power supply

indicated by the

brand name matches

to ensure the normal

operation of the

machine.

Sharing sockets with

other high-power

devices can cause

large fluctuations.

Make sure that one

scale uses a matching

power outlet.

Do not insert metal

or ammable objects

at the interface to

avoid damage to the

machine or re.

If the scale falls,

please turn off the

switch and power

Plug immediately,

suspend use, and

contact the service

personnel in time to

avoid re or electric

shock.

Make sure that the

scale and extension

cable are properly

grounded, as this

can cause external

metal parts to be

electrostatically

charged to prevent

re or electric shock.

Immediately turn

off the switch and

Plug when metal

fragments or liquids

enter the interior,

suspend use and

contact service

personnel to avoid

re or electric shock.

Metal objects or

liquids can cause

fire or rust in the

scale. Keep an

appropriate distance

from the scale to

avoid damage.

Do not scratch

or modify the

power cord, bend

excessively or place

heavy objects on

top to avoid fire or

short circuit.

When the scale

emits smoke or

strange smell,

please stop using it

immediately, turn

off the switch and

power supply, and

contact the service

personnel in time.

To avoid

disconnection of

the power cord or

peeling of the cord

when unPlugging

the power cord, do

not pull on the cord.

Do not remove,

repair or modify the

scale body, high-

voltage, high-heat

parts or internal

edges to ensure

personal safety.

Keep your fingers

dry when inserting

or removing the

power Plug to avoid

electric shock.

OPERATIONAL WARNING

Maximum range

Internal fractional value

Display division value

Nonlinear error

Maximum counting range

Display device

3 kg 6 kg 15kg 30kg 30lb

60lb 3/6kg 6/15kg 15/30lb 30/60lb

Up to 100,000

Range 1000 ～ 20000

<0.008% FS (display only)

0 ～ 60000PCS

Operating temperature

Use relative humidity

0 ～ 40℃

15% ～ 85%RH( No condensing )

Monitor

Capacity indicator

Unit of weight

Status Indicator

Decimal symbol

Operation buttons

Power supply

Interface

6-digit LCD, 14 indicators

5 of them, g/kg/lb/oz/pcs

6 of them are ZERO/STABLE/NET/S1/S2/S3

You can choose "." or ","

[REZERO]/[UNIT/ ← ]/[TARE/ ↑ ]/[ON/OFF]

1. 4 R20P SIZE D 1.5V dry batteries

2. External AC adapter DC 5~12V/0.5A

1 RS-232 interface (data 600 ~ 57600 bit/s

baud, 8bit Data, 1bit Stop, No parity bit)/1

USB communication interface

1.1 Product specications

1000

3000 4000 5000 6000 7500

10000 12500 20000

1250 1500 2000 2500

Please avoid placing the product in the following locations:

If the temperature is too high or too low, direct sunlight, wet place;

At the shared power supply, excessive vibration, dust, and moisture.

Do not press the button too hard, please touch the button.

Do not suddenly bump into the machine to avoid damaging the load cell.

Do not press the center of gravity on the weighing platform to avoid damage to the load cell.

To clean the weighing pan and keyboard, use a dry cloth and wipe with a detergent. Do not use

thinner or other volatile solvents.

In order to ensure the normal use of the scale, before starting the operation every day, adjust the

level and lock the foot nut, and place a known weight of the item on the weighing platform to check

the weighing of the scale.

Do not place the instrument on an unstable or inclined surface to avoid dropping.

Use standard thermal paper to store thermal paper under direct sunlight, high temperatures, dust, or

moisture.

When the mechanical equipment is moved to a higher temperature in a place with a lower

temperature (such as a refrigerating room), because the temperature difference is large, the power

supply cannot be turned on immediately to prevent the condensation of the water vapor and cause

damage to the machine.

Keep one socket and one machine, avoiding high voltage or equipment that may cause power

interference.

Thermal print head failure is not covered by the warranty. Please use and maintain the equipment

properly according to the instructions or service personnel's recommendations.

Do not use the long-distance line of the power Plug of the scale. Be sure to keep it in the AC

socket. Keep the hand dry when pulling the Plug. Excessive bending and pulling will damage the

power cord and cause re or electric shock.

Please follow the prompts to extend the life.

*NOTICE

PRECAUTIONS

If you have any questions,

please contact your local

dealer or visit our website：

www.dbscale.com.cn

Thank you.

1. CONVENTIONAL

1.1 Product specications

Front view Back view

Side view

Top view

1.4 Global view

1.2 Indicator display

100

1 2 3

·Weight zero

indicator, light when

the weight is "0"

·When the weight

value is stable, the

indicator lights

·When the displayed

value is net weight, the

indicator lights ·When the counting mode is

set in the number of samples,

this indicator lights

·When S2 is displayed, when the electronic

scale is in the process of setting and

calibration, this indicator lights

The unit of weight is “g”

(gram)/“kg” (kg)/“lb” (pound)/“oz”

(ounce)/when in counting mode,

the corresponding “g”/“kg”/“lb”/

"Oz"/"PCS" indicator lights

·When S3 is displayed,

when the weight is locked

(HOLD), the indicator lights

It is the operation confirmation and data

save button in the setting mode, and the zero

operation button in the weighing mode

Host power switch, exit setting in setting mode

In the setting mode, select the set digit, in

the weighing mode, the peeling operation or

long press for 3 seconds to enter the function

(counting mode) button key (only valid under

the conditions allowed by the counting mode)

In setting mode, select set digit, in weighing

mode, unit conversion and or counting sampling

confirmation button (only valid under the

conditions allowed by counting mode)

1.3 Basic function keys

UNIT

←

TARE

↑

REZERO

OFF

Zero key

Power key

Tare mode key

Unit

conversion

key

Keyboard type Speci󽗉c display

1. CONVENTIONAL 1. CONVENTIONAL

1.2 Indicator display

1.4 Global view

Main/sub screen

USB socket

RS232

1.5 Interface 2.1 Boot operation

1.6 Display

·Toggle the reset switch on the bottom left side of the scale

Note:

1. During the field check, press the [REZERO] key to exit the field check

and enter the weighing mode.

2. When the battery capacity indicator shows only one frame, it means

that the internal battery voltage is too low, please replace the battery.

(Please use 4 alkaline batteries with R20P SIZE-D 1.5V battery type).

3. DSW100 is the instrument model; Ur.341 is the software version

number

1. CONVENTIONAL 2. BASIC OPERATION

1.5 Interface

2.1 Boot operation

2.2 Shutdown operation

Method one: click [ON/OFF] button to shut down Make sure that the scale is in a stable state and put a heavy

object, the weight must be less than the set allowable zero

setting range, such as 0.500kg

Method 2: Turn o󽗈 the reset switch

Click [REZERO] and remove the heavy object, which shows

-0.500kg

Method 2: Unplug the AC power and shut down

Click [REZERO] again to reset to zero

OFF

Note:

When charging is not required, unplug the AC power

Note:

1. If the placed weight exceeds the zero setting range, press the

[REZERO] key, and the tare operation will be completed.

2. The zero setting range can be selected by setting SPEC 04 BIT 3,

BIT2.

2.3 Zero operation

REZERO

2. BASIC OPERATION 2. BASIC OPERATION

2.2 Shutdown operation

2.3 Zero operation

2.4 Tare operation 2.5 Counting and weighing operation

Make sure that the scale is in a stable state and put on heavy

objects. The weight must be less than the set allowable

peeling range, such as 2.500kg

Click [TARE] and remove the heavy object, which is displayed

as -2.500kg

Click [TARE] again to resume zero setting

Note:

1. If the placed weight exceeds the allowable zero setting range, the tare

operation will be performed after pressing the tare key.

2. The peeling range can be modified by SPEC 04 BIT 0 to select the

allowed peeling range of 50%FS or 100%FS

TARE

↑

(1) Ensure that the scale is in a stable state

(2) Press and hold the [REZERO] button for a long time, and

click the [ ← ] button three times to enter the customer

function settings

(3) Click the [REZERO] button to turn down to Spec03

(4) Modify the default "1011" to "1010"

(5) Click the [REZERO] button to save, press [ON/OFF] to exit

the setting

Method one

Enter weighing mode by setting button

REZERO

TARE

↑

REZERO

OFF

2. BASIC OPERATION 2. BASIC OPERATION

2.4 Tare operation

2.5 Counting and weighing operation

(6) Click the [ ↑ ] button to enter the counting operation,

the default display is 10 pieces, you need to put 10 pieces of

goods on the weighing pan to count

(2) Click the [ ↑ ] button to enter the counting operation, the default

display is 10 pieces, you need to put 10 pieces of goods on the weighing

pan to count

(7) Click the [ON/OFF] button to check the total weight. If

the number of pieces placed on the weighing pan exceeds

10 pieces, click the [ ↑ ] button to increase the number of

objects placed on the weighing pan

(3) Click the [ON/OFF] button to view the total weight. If the number

of pieces placed on the weighing pan exceeds 10 pieces, click the [ ↑ ]

button to increase the number of objects placed on the weighing pan

Make sure the scale is stable

(1) Press and hold the [ ↑ ] key for 5 seconds to enter the weighing mode

If there is already weight on the weighing pan when entering

the counting and weighing, click the [REZERO] button to

execute the peeling function, after which the weighing items

can be placed

Click [ ← ] key again to select the quantity, click [ON/OFF]

key to exit the selected state

OFF

Method Two Long press【↑】key to enter weighing mode

Note:

Increase the number of pieces by increasing to "10, 20, 30, 40, 50, 100,

200, 300, 400, 500, 1000", after reaching the maximum value "100",

then press [ ↑ ] will display the total weight interface, again Click [ ↑ ] to

enter the counting and weighing default "10 pcs"

REZERO

OFF

2. BASIC OPERATION

2.5 Counting and weighing operation

2. BASIC OPERATION

2.5 Counting and weighing operation

2.6 Weight unit switch 2.7 Backlight brightness setting

Make sure the scale is stable Make sure the scale is stable

Press and hold the [ ← ] key for 5 seconds, knowing that "bL.S

3" appears on the screen, and the displayed "3" is the backlight

brightness level

Click [ ← ] to increase the brightness, the minimum brightness is 0

(without backlight), and the maximum brightness is 9

Click [REZERO] to save and exit

Put a heavy object on the weighing pan, such as 0.545kg

Click the [ ← ] key, it is displayed as 1.202lb; click the [ ← ] key

again, it is displayed as 19.22oz; the third click the [ ← ] key, it

is displayed as 545g; the fourth time it is restored to 0.545kg

After removing the heavy objects, click [REZERO] to resume zero setting

REZERO

Note:

To enable this switching function, SPEC03 bit.2 must be set to 0

Note:

When working with batteries, reduce the brightness level of the

backlight as much as possible. To reduce battery consumption and

extend battery life

UNIT

←

UNIT

←

2. BASIC OPERATION 2. BASIC OPERATION

2.6 Weight unit switch

REZERO

2.5 Backlight brightness setting

Inhaltsverzeichnis

Andere DB Electronics Skala Handbücher

DB Electronics

DB Electronics DSR-100PE Bedienungsanleitung

DB Electronics

DB Electronics DB-100 Series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung