Dbx IEM Bedienungsanleitung

8760 S. Sandy Pkwy.

Sandy, Utah 84070

Phone (801) 568-7660

Fax (801) 568-7662

Int’l Fax (801) 568-7583

[email protected]

http://www.dbxpro.com

A Harman International Company

18-1788-A 01/01

Finally! There is now a digital signal processor that has been designed specifically for in ear monitor appli-

cations. New from dbx Professional Products, comes the IEM, In-Ear-Monitor Processor which is the ideal

tool for fine-tuning mix monitoring for In-Ear monitoring devices. Not only does the IEM provide the leg-

endary dbx effects in the digital domain, such as 4-band stereo compression, PeakStop™ limiting and 5-

band parametric EQ, but the IEM also includes stereo adjust, dbx proprietary Type IV™ conversion sys-

tem, and for good measure, we have even raised the playing field by including custom reverb algorithms

using the industry-standard Lexicon®digital reverb technology. The IEM from dbx Professional Products

is a unit that is certain to take In-Ear Monitor processing to the next level.

From the company that has been redefining the standard of signal processing for more than 25 years,

dbx®Professional Products now offers a bulletproof product that caters to the scrutinizing needs of per-

formers who utilize In-Ear Monitoring devices. The IEM was designed with the simple purpose and

vision of enhancing the sonic quality of all In-Ear monitor applications, while providing the necessary

audio level protection that artists and engineers require. The design team at dbx has achieved this pursuit

by building a unit that offers effects including: 4-band stereo compressor with gating and limiting, 5-

Band Parametric EQ, PeakStop™ limiting, Stereo adjust and Lexicon®reverbs. In addition to methodi-

cally designing a utilitarian unit that includes an intuitive user front panel which provides instant access

to all effects within the IEM at the push of a button, as well as a large custom display which clearly

shows all operational information of the unit in a logical manner. Software updates can be downloaded

instantly from www.dbxpro.com through the RS 232 port.

•Industry-Standard Lexicon®Reverb

Algorithms

•48 bit internal signal path for increased

head room and low level resolution

•TYPE IV™ A/D Conversion system with

TSE™

•4-band stereo Compressor and limiter with

classic dbx Compression

•5-band EQ – Hi and Lo shelves, 3 band

fully parametric

•PeakStop™ limiting

•Stereo adjust – to control your stereo image

•Software updateable via Internet and RS

232 port

•4-band crossover with

variable slopes

dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.

FOR MORE INFORMATION CONTACT:

dbx Professional Products

8760 S. Sandy Pkwy.

Sandy,Utah 84070

Phone (801) 568-7660

Fax (801) 568-7662

Int’l Fax (219) 462-4596

[email protected]

http://www.dbxpro.com

A Harman International Company

Inputs

Connectors: Female XLR and 1/4'' TRS (Pin 2 and tip hot)

Type: Electronically balanced/unbalanced, RF filtered

Impedance: Balanced >18 kΩ,unbalanced >9 kΩ

Max Input Level: +24 dBu balanced or unbalanced

CMRR: >40 dB, typically >55 dB at 1 kHz

Input Gain Range: -∞to +16 dB

MIDI: 5-Pin DIN MIDI Input Jack

Outputs

Connectors: Male XLR and 1/4'' TRS (Pin 2 and tip hot)

Type: Servo-balanced/unbalanced, RF filtered

Impedance: Balanced 120 Ω,unbalanced 60 Ω

Max Output Level: >+21dBu balanced/unbalanced into 2kΩor greater

>+20dBm balanced/unbalanced (into 600Ω)

Output Gain Range: -∞to +16 dB

MIDI: 5-Pin DIN MIDI Out/Thru Jack

PC COMM: RS 232

A-D System Performance

A-D Conversion: 24-bit, dbx Type IV™ Conversion System

Convertor Dynamic Range: 114 dB typical, A-weighted, 22 kHz bandwidth

112 dB typical, unweighted, 22 kHz bandwidth

Type IV™ Dynamic Range: Up to 127 dB with transient material, A-weighted, 22 kHz bandwidth

Up to 125 dB with transient material, unweighted, 22 kHz bandwidth

Typically 119 dB with program material, A-weighted, 22 kHz bandwidth

Typically 117dB with program material, unweighted, 22 kHz bandwidth

THD+Noise: 0.002% typical at +4 dBu, 1 kHz, input gain at 0 dB

Frequency Response: 20 Hz to 20 kHz, +0/-0.5 dB

Interchannel Crosstalk: <-85 dB at 1 kHz, input gain at 0 dB

D-A System Performance

D-A Conversion: 24-bit

Dynamic Range: 115 dB typical, A-weighted, 22 kHz bandwidth

112 dB typical, unweighted, 22 kHz bandwidth

THD+Noise: 0.002% typical at +4 dBu, 1 kHz, output gain at 0 dB

Frequency Response: 20 Hz to 20 kHz, +0/-0.5 dB

Interchannel Crosstalk: < -85 dB at 1 kHz, output gain at 0 dB

Power Supply:

Operating Voltage: 100-240 VAC 50/60 Hz

Power Consumption: 24 watts

Physical:

Dimensions: 1.75''Hx10''Dx19''W

Weight: 7.14 lbs. (3.24 kg)

Shipping Weight: 10 lbs (4.40 kg)

Andere Handbücher für IEM

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

dbx IEM Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken